Instruction/ maintenance manual of the product GI3016-N Napoleon Fireplaces
Go to page of 16
1 W415-0171 / D / 01.06.04 INST ALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada • (705)721-1212 • fax(705)722-6031 www .napoleonfireplaces.com • ask@napoleon.
2 W415-0171 / D / 01.06.04 10-11 OPERA TION / MAINTENANCE Operating Instructions Fresh Air Damper System Maintenance 11 BL OWER INST ALLA TION Blower Replacement Instructions 1 1 ADJUSTMENTS V enturi .
3 W415-0171 / D / 01.06.04 NAPOLEON gas fireplaces are manufactured under the strict Standard of the world recognized ISO 9001 : 2000 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials, assembled by trained craftsmen who take great pride in their work.
4 W415-0171 / D / 01.06.04 The fireplace, when installed, must be electrically con- nected and grounded in accordance with local codes. In the absence of local codes, use the current CSA C22.1 CANADIAN ELECTRICAL CODE in Canada or the ANSI/NFP A 70 NA TIONAL ELECTRICAL CODE in the United S tates.
5 W415-0171 / D / 01.06.04 Do not use abrasive cleaners to clean these parts. Buff lightly with a clean dry cloth. Porcelain enamelled compo- nents must be handled with care. The baked-on finish is glasslike. If struck, it will chip! T ouch-up p aint is available through your Napoleon dealer .
6 W415-0171 / D / 01.06.04 Remove the se- curing screws lo- cated on either of the firebox sides as illustrated. Remove protective plastic wrap from all four panels. Centre the rear brick panel against the back of the firebox. Place the left brick panel against the left side of the firebox, ensuring that it butts up to the rear panel.
7 W415-0171 / D / 01.06.04 FIGURE 10 FIGURE 1 1 POSITIONING THE LOGS IMPROPERL Y WILL CAUSE FLAME IMPINGEMENT AND CARBONING . PHAZER TM logs and charcoal embers, exclusive to Napo- leon Fireplaces, provide a unique and realistic glowing effect that is dif ferent in every installation.
8 W415-0171 / D / 01.06.04 Attach the lower glass bracket. Seat the glass inside the bracket and using two screws attach the upper glass bracket, as shown. Assemble the flashing and mount to the inside of the outer shell using 4 securing screws (supplied with the louvre kit).
9 W415-0171 / D / 01.06.04 With the bay chassis on a flat surface, insert the front glass (bottom first) and centred to the mitred edges of the chassis. Fit the bevelled edge of the each side glass piece tightly to either edge of the front glass. Secure the glass by bend- ing up the retainer tabs at the top and bottom.
10 W415-0171 / D / 01.06.04 If your masonry fireplace is equipped with a fresh air inlet in the floor of the firebrick chamber , the insert is able to take outside air directly into the unit through an opening in its base thereby eliminating the need to use preheated room air for combustion.
11 W415-0171 / D / 01.06.04 3. Check to see that all burner ports are burning. Clean out any of the ports which may not be burning or are not burn- ing properly .
12 W415-0171 / D / 01.06.04 # P AR T NO. DESCRIPTION 1 GZ-551 REPLACEMENT BLOWER 2 W725-0036 NA TURAL GAS V AL VE C/W ADJUST ABLE REGULA TOR 2 W725-0037 PROP ANE GAS V AL VE C/W ADJUST ABLE REGULA T O.
13 W415-0171 / D / 01.06.04.
14 W415-0171 / D / 01.06.04 Gas piping is undersized. Pilot goes out while standing; Main burner is in 'OFF' position. - turn on all gas appliances and see if pilot flame flutters, diminishes or extinguishes, especially when main burners ignite.
15 W415-0171 / D / 01.06.04 Main burner goes out; pilot goes out. A - Refer to "Main burner goes out; pilot stays on" B - Chimney down-drafting - wait ten minutes. Shut off all exhaust fans in the house (ie: kitchen and bathrooms), furnace, and clothes dryer .
16 W415-0171 / D / 01.06.04 W olf Steel Fir eplace Ser vice Histor y This fireplace must be serviced annually depending on usage. Date Service T echnician Name Service Performed Special Concerns Deale.
An important point after buying a device Napoleon Fireplaces GI3016-N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Napoleon Fireplaces GI3016-N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Napoleon Fireplaces GI3016-N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Napoleon Fireplaces GI3016-N you will learn all the available features of the product, as well as information on its operation. The information that you get Napoleon Fireplaces GI3016-N will certainly help you make a decision on the purchase.
If you already are a holder of Napoleon Fireplaces GI3016-N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Napoleon Fireplaces GI3016-N.
However, one of the most important roles played by the user manual is to help in solving problems with Napoleon Fireplaces GI3016-N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Napoleon Fireplaces GI3016-N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
