Instruction/ maintenance manual of the product EPA 1450 Napoleon Fireplaces
Go to page of 21
1 W415-0512 / D / 07.16.08 W415-0512 / D / 07.16.08 $10.00 INST ALLA TION AND OPERA TION INSTRUC TIONS W olf Steel Ltd., 24 Napoleon Rd ., Barrie, ON L4M 4Y8 Canada s (705)721-1212 s fax(705)722-6031 ww w .napoleonreplaces .com s ask@napoleon.on.ca CERTIFIED UNDER U.
2 W415-0512 / D / 07.16.08 PG 2-4 INTRODUCTION W arranty General Information Care of Plated & Enamelled Parts Care of Glass 5-6 INST ALLA TION Installing the Legs Alcove Installation Stove Install.
3 W415-0512 / D / 07.16.08 NAPOLEON® products are manufactured under the strict Standard of the World Recognized ISO 9001 : 2000 Quality Assurance Certi fi cate. NAPOLEON® products are designed with superior components and materials, assembled by trained craftsmen who take great pride in their work.
4 W415-0512 / D / 07.16.08 HOT SECONDARY AIR FIBRE BRICKS RÉFRACTAIRES 2 SIDES, BACK & BOTTOM SECONDARY AIR PRIMARY AIR FLUE GLASS CERAMIC GLASS DRAFT CONTROL COMBUSTION AIR INTAKE OPEN CLOSED D.
5 W415-0512 / D / 07.16.08 If the stove is to be installed on a combustible fl oor , it must be placed on an approved non-combustible hearth pad, that extends 8” (200mm) beyond the stove sides and back, and 18” (455mm) to the front. It must be installed with a minimum height of 7’ between the stove base and the ceiling.
6 W415-0512 / D / 07.16.08 PEDESTAL BASE 4.5" PEDESTAL BASE FLOOR AREA BELOW ST OVE B" A (in.) B(in.) 1 100 8 5/8" 9 3/4" 1400 1 1 1/8" 9 3/4" 1900 14 7/8" 9 3/4&quo.
7 W415-0512 / D / 07.16.08 It must be installed between ceil- ing joists, with radiation shield and roof flashing, so that the structural strength, insulation and waterproof qualities of the home are not lessened. Seal with sili- cone to maintain a vapour barrier at the chimney and outside air pipe penetrations.
8 W415-0512 / D / 07.16.08 In the United States: While it is not required, it is recom- mended that a chimney liner be installed that is continuous from the insert to the top of the chimney , particularly when the insert is installed in a basement. For this type of connection, use the “In Canada” installation instructions above.
9 W415-0512 / D / 07.16.08 3. The access panel can be removed by taking out the 8 #10 self taping screws. A 5/16” nut driver will be required to complete this job.
10 W415-0512 / D / 07.16.08 1 100/1 100C/ 1 101 1400/1400L 1402/1450 1900 1 100L/1 150 4-#1 4-#1 4-#1 4-#1 4-#7 * 2-#4 2-#4 2-#4 2-#4 2-#2 8-#1 8-#1 12-#1 12-#1 12-#7 * 2-#3 2-#3 2-#3 2-#4 (notched) 2.
11 W415-0512 / D / 07.16.08 With stove and chimney installation completed, move the bricks into place by working as illustrated for your unit on page 10. 1. Install two or three courses of brick on both sides of the unit. Install two courses on the back wall.
12 W415-0512 / D / 07.16.08 ASH WELL COVER TO CLOSE: ROTATE PULL HANDLE REAR FOLDING HANDLE TO OPEN: PULL AND ROATE Y ou can now add larger pieces of wood and operate the stove normally . Once the stove/insert is entirely hot, it will burn very ef fi ciently with little smoke from the chimney .
13 W415-0512 / D / 07.16.08 A properly installed Napoleon unit should not smoke. If yours does, check the following: Has the chimney had time to get hot? Is the smoke passage blocked anywhere in the stove, chimney connector or chimney? Is the room too airtight and the air intake not connected to the outside? T ry with a win- dow partly open.
14 W415-0512 / D / 07.16.08 Burn only dry, clean unpainted wood that has been seasoned. It produces more heat and less soot or creosote. Freshly cut wood contains about 50% moisture while after proper seasoning only about 20% of the water remains. As wood is burned, this water boils off consuming energy that should be used in heating.
15 W415-0512 / D / 07.16.08 # P ART NO. DESCRIPTION 1 W325-0002 SPRING HANDLE - SMALL 2 W325-0007 SPRING HANDLE - LARGE 3* W090-0001 BRICK - # 1 4* W090-0002 BRICK - # 2 5* W090-0004 BRICK - # 4 LEFT .
16 W415-0512 / D / 07.16.08 66 GS200-G ORNAMENT AL TRIVET 67 EP62-1 V ARIABLE SPEED BLOWER 68* W500-0064 FRESH AIR COVER PLA TE 69* 1 1 1KT OUTSIDE AIR KIT 70* W470-0002 ENAMEL T OUCH UP & BRUSH (.
17 W415-0512 / D / 07.16.08 60 15 16 18 17 19 16 58 2 32 12 10 14 30 33 75 85 84 74 73 77 64 65 Z.P. Ins. ClassB 115V 60Hz 46W EM3030L-167 zr-2 073 SEL 82 67 1 46 78 40 38 39 59 66 55 56 48 49 86 47 5.
18 W415-0512 / D / 07.16.08 Fir eplace Ser vice Histor y This replace must be serviced annually depending on usage. Date Service T echnician Name Service Performed Special Concerns Dealer Name.
19 W415-0512 / D / 07.16.08 NO TES.
20 W415-0512 / D / 07.16.08 NO TES.
21 W415-0512 / D / 07.16.08.
An important point after buying a device Napoleon Fireplaces EPA 1450 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Napoleon Fireplaces EPA 1450 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Napoleon Fireplaces EPA 1450 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Napoleon Fireplaces EPA 1450 you will learn all the available features of the product, as well as information on its operation. The information that you get Napoleon Fireplaces EPA 1450 will certainly help you make a decision on the purchase.
If you already are a holder of Napoleon Fireplaces EPA 1450, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Napoleon Fireplaces EPA 1450.
However, one of the most important roles played by the user manual is to help in solving problems with Napoleon Fireplaces EPA 1450. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Napoleon Fireplaces EPA 1450 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
