Instruction/ maintenance manual of the product EF30 Napoleon Fireplaces
Go to page of 16
1 W415-0675 / A / 03.28.08 W415-0675 / A / 03.28.08 $10.00.
W415-0675 / A / 03.28.08 2 • Do not burn wood or other materials in this fireplace. • Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. Supervise young children when they are in the same room as the fireplace.
3 W415-0675 / A / 03.28.08 Electrical components and wearable parts such as fan/heater, motors, switches, nylon bearing components and remote controls are covered and NAPOLEON® will provide replacement parts free of charge during the first year of limited warranty.
W415-0675 / A / 03.28.08 4 When using electric appliances, basic precautions should always be followed to reduce the risk of fi re, electric shock, and injury to persons, including the following: 1. Read all instructions before using this fi replace.
5 W415-0675 / A / 03.28.08 This fi replace has been tested in accordance with the CSA Standards for fi xed and location-dedicated electric room fi re- places in the United States and Canada. If you need assistance during installation, please contact your local dealer .
W415-0675 / A / 03.28.08 6 LOCA TING FIREPLACE ! W ARNING Due to high temperatures, this electric fi replace should be located out of traffi c. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.
7 W415-0675 / A / 03.28.08 ! W ARNING RISK OF FIRE! The power cord must not be pinched against a sharp edge. Secure cord to avoid tripping or snag- ging to reduce the risk of fi re, electric shock or personal injury . Do not run cord under carpeting.
W415-0675 / A / 03.28.08 8 THERMOST A T AND THERMAL SENSOR INST ALLA TION This fi replace has two options for heat control. First is a thermal controlled sensor , which comes plugged into the fi replace beside the main power cord.
9 W415-0675 / A / 03.28.08 HARDWIRE INST ALLA TION HARD WIRING CONNECTION If it is necessary to hard wire this fi replace, a qualifi ed electrician may remove the cord connection, and wire the unit directly to the house hold wiring. This fi replace must be electrically connected and grounded in ac- cordance with local codes, if hard wired.
W415-0675 / A / 03.28.08 10 NOTE: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the fi replace body , it is recommended that the walls of the fi replace enclosure be “fi nished” (ie: drywall/sheetrock), as you would fi nish any other outside wall of a home.
11 W415-0675 / A / 03.28.08 OPERA TING BY REMOTE CONTROL 1. Plug in your electric fi replace. 2. Make sure the unit's main Power ON/OFF button is at the ON position! The remote control will NOT work if the main Power button is at the OFF position.
W415-0675 / A / 03.28.08 12 ! W ARNING PREP ARA TION FOR MAINTENANCE Always disconnect the power and allow the electric fi replace to cool before performing any cleaning, maintenance or relocation of this electric fi replace.
13 W415-0675 / A / 03.28.08 EMBER BED BULB REPLACEMENT 1. Remove the 7 screws from the bottom half of the back of fi replace shown in Figure 16 . Remove back plate. 2. Locate the ember bed bulbs which are underneath the fl ame generation cylinder drum.
W415-0675 / A / 03.28.08 14 # P ART NO. DESCRIPTION 1 DQ017-002 LIGHT BULBS 2 RC3 DQ002-006 CIRCUIT BOARDS 3 Q/T FRT01-000-00B HE A TER (HEA TER WITH BLOWER) 4 DQ006-003 SWITCHES 5 R-14 REMOTE CONTROL Contact your dealer for questions concerning prices and availability of replacement parts.
15 W415-0675 / A / 03.28.08 ! W ARNING T urn off the fi replace completely and let cool before servicing. Only a qualifi ed service person should service and repair this electric fi replace. OBSERVED PROBLEM POSSIBLE CAUSE REMEDY Dim or no fl ame 1.
W415-0675 / A / 03.28.08 16 NO TES.
An important point after buying a device Napoleon Fireplaces EF30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Napoleon Fireplaces EF30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Napoleon Fireplaces EF30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Napoleon Fireplaces EF30 you will learn all the available features of the product, as well as information on its operation. The information that you get Napoleon Fireplaces EF30 will certainly help you make a decision on the purchase.
If you already are a holder of Napoleon Fireplaces EF30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Napoleon Fireplaces EF30.
However, one of the most important roles played by the user manual is to help in solving problems with Napoleon Fireplaces EF30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Napoleon Fireplaces EF30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
