Instruction/ maintenance manual of the product 1401 Napoleon Fireplaces
Go to page of 20
1 W415-0512 / B / 1 1.15.05 INST ALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER. Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 4Y8 Canada • (705)721-1212 • fax(705)722-6031 www .napoleonfireplaces.com • ask@napoleon.
2 W415-0512 / B / 1 1.15.05 PG 2 - 4 INTRODUCTION Warranty General Information Care of Plated & Enamelled Parts Care of Glass 5- 6 INST AL LA TION Installing the Legs Alcove Installation S tove In.
3 W415-0512 / B / 1 1.15.05 NAPOLEON products are manufactured under the strict Standard of the World Recognized ISO 9001 : 2000 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials, assembled by trained craftsmen who take great pride in their work.
4 W415-0512 / B / 1 1.15.05 Except for their different depths, models 1 100, 1 150, 1400, 1900 and the fireplace inserts 1 101 and 1401 are identical and use the same burning principles. They were specifi- cally designed over many months of research to meet the 1990 U.
5 W415-0512 / B / 1 1.15.05 To avoid being damaged during shipping, the stove has been bolted to the pallet and must be unbolted before the stove can be installed. 1. Remove the 4 nuts and washers from the underside of the pallet. 2. Lift the stove up and away from the pallet to clear the threaded studs sticking through the pallet.
6 W415-0512 / B / 1 1.15.05 PEDESTAL BASE 4.5" PEDESTAL BASE FLOOR AREA BELOW STOVE A" B" A (in.) B(in.) 1 100 8 5/8" 9 3/4" 1400 1 1 1/8" 9 3/4" 1900 14 7/8" 9.
7 W415-0512 / B / 1 1.15.05 It must be installed be- tween ceiling joists, with radiation shield and roof flashing, so that the structural strength, insulation and waterproof quali- ties of the home are not lessened. Seal with silicone to maintain a vapour barrier at the chimney and outside air pipe penetrations.
8 W415-0512 / B / 1 1.15.05 In the United States: While it is not required, it is rec- ommended that a chimney liner be installed that is con- tinuous from the insert to the top of the chimney , particu- larly when the insert is installed in a basement.
9 W415-0512 / B / 1 1.15.05 3. The access panel can be removed by taking out the 8 #10 self taping screws. A 5/16" nut driver will be required to complete this job.
10 W415-0512 / B / 1 1.15.05 1 100/1 100C/ 1101 1400/1400L 1401 1900 1 100L/1 150 4-#1 4-#1 4-#1 4-#1 4-#7 * 2-#4 2-#4 2-#4 2-#4 2-#2 8-#1 8-#1 12-#1 12-#1 12-#7 * 2-#3 2-#3 2-#3 2-#4 (notched) 2-#10 .
11 W415-0512 / B / 1 1.15.05 With stove and chimney installation completed, move the bricks into place by working as illustrated for your unit on page 10. 1. Install two or three courses of brick on both sides of the unit. Install two courses on the back wall.
12 W415-0512 / B / 1 1.15.05 ASH W ELL COVER ROTATE TO CLOSE: FOLDING HANDLE REAR ROTATE PULL AND TO O PEN: Y ou can now add larger pieces of wood and operate the stove normally . Once the stove/insert is entirely hot, it will burn very efficiently with little smoke from the chimney .
13 W415-0512 / B / 1 1.15.05 A properly installed Napoleon unit should not smoke. If yours does, check the following: Has the chimney had time to get hot? Is the smoke passage blocked anywhere in the stove, chimney connector or chimney? Is the room too airtight and the air intake not connected to the outside? Try with a window partly open.
14 W415-0512 / B / 1 1.15.05 Burn only dry , clean unpainted wood that has been seasoned. It produces more heat and less soot or creosote. Freshly cut wood contains about 50% moisture while after proper sea- soning only about 20% of the water remains.
15 W415-0512 / B / 1 1.15.05 # P AR T NO . DESCRIPTION 1 W325-0002 SPRING HANDLE - SMALL 2 W325-0007 SPRING HANDLE - LARGE 3* W090-0001 BRICK - # 1 4* W090-0002 BRICK - # 2 5* W090-0004 BRICK - # 4 LE.
16 W415-0512 / B / 1 1.15.05 6 5 GS200-G ORNAMENT A L TRIVET 6 6 EP62-1 V ARIABLE SPEED BLOWER 67* W500-0064 FRESH AIR COVER PLA TE 68* 1 1 1 K T OUTSIDE AIR KIT 69* W470-0002 ENAMEL TOUCH UP & BR.
17 W415-0512 / B / 1 1.15.05 59 15 16 18 17 19 16 57 2 32 12 10 14 30 33 74 31 44 84 83 73 72 76 63 64 Z.P. Ins. ClassB 115V 60Hz 46W EM3030L-167 zr-2 073 SEL 81 66 1 46 77 40 38 39 58 65 55 56 48 49 .
18 W415-0512 / B / 1 1.15.05 W olf Steel Fireplace Ser vice Histor y This fireplace must be serviced annually depending on usage. Date Service T echnician Name Service Performed Special Concerns Deale.
19 W415-0512 / B / 1 1.15.05 NO TES.
20 W415-0512 / B / 1 1.15.05 NO TES.
An important point after buying a device Napoleon Fireplaces 1401 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Napoleon Fireplaces 1401 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Napoleon Fireplaces 1401 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Napoleon Fireplaces 1401 you will learn all the available features of the product, as well as information on its operation. The information that you get Napoleon Fireplaces 1401 will certainly help you make a decision on the purchase.
If you already are a holder of Napoleon Fireplaces 1401, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Napoleon Fireplaces 1401.
However, one of the most important roles played by the user manual is to help in solving problems with Napoleon Fireplaces 1401. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Napoleon Fireplaces 1401 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
