Instruction/ maintenance manual of the product T 751751 NAD
Go to page of 23
GB NA D T 751 751 • OWNER'S MANUAL ©2000 NAD ELECTRONICS LTD. T 751.
NA D 2 Warning: To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. The lightning flash with an arrowhead symbol within an equilateral trian- gle is intended to .
NA D 3 W ARNING - INVISIBLE LASER RADIA TION WHEN OPEN AND INTERLOCKS DEFEA TED. A VOID EXPOSURE TO BEAM. VORSICHT! - UNSICHTBARE LASERTRAHLUNG TRITT AUS, WENN DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG ÜBERBRÜCKT IST . NICHT DEM STRAHL AUSSETZEN.
REAR P ANEL CONNECTIONS (Figure 1.) 2 1 78 3 4 11 6 12 5 10 9 14 13 FRONT P ANEL CONNECTIONS (Figure 2.) 751 NA D 4 ©2000. NAD ELECTRONICS LTD. T 751 ©2000.
NA D 5 1 2 5 3 4 6 7 8 9 10 11 751 NAD 2000 T751 RC REMOTE CONTROL (Figure 3.) NL Batterij niet weggooien maar inleveren als KCA (Figure 6.) 12 3 (Figure 5.
SIMPLE T 751 SYSTEM (Figure A.) TV VIDEO STEREO AUDIO VCR IN / OUT T APE IN / OUT CD IN ©2000. NAD ELECTRONICS LTD. T 751 SOPHISTICA TED T 751 SYSTEM (Figure B.) TV VIDEO STEREO AUDIO VCR IN / OUT T APE IN / OUT CD IN AUDIO / GAMES IN SUBWOOFER ©2000.
VIDEO STEREO AUDIO DVD COMPOSITE VIDEO OUT DIGIT AL COAXIAL OUT S VIDEO OUT ©2000. NAD ELECTRONICS LTD. T 751 THE OPTICAL DIGIT AL INPUT 1 IS LINKED TO THE VIDEO 1 INPUT . ©2000. NAD ELECTRONICS LTD. T 751 NA D 7 THE COAXIAL DIGIT AL INPUT 2 IS LINKED TO THE VIDEO 2 INPUT .
NOTES ON INST ALLA TION. Your NAD T 751 should be placed on a firm, level surface. Avoid placing the unit in direct sunlight or near sources of heat and damp.
5. VIDEO 1 - VIDEO 4 (AUDIO & VIDEO) Apart from the audio signal, these inputs will also accept a video signal which will be routed to the Monitor Out sockets (No.
Note that an S-Video signal from Video input 1 through 3 will also be available as a Video Composite signal on Monitor out, if the corresponding source is selected. The composite video input signals from Video 1 to 5 (No. 5; yellow sockets) will also be avail- able as S-Video signal on the Monitor Out socket.
NA D 11 GB NOTE: The total power consumption of any components connected to the AC outlets may not exceed 120 Watts. Never connect the mains lead of a power amplifier to either outlets of the NAD T 751. NOTE: The AC outlets should be used with units with a COMBINED power consumption of no more than 120 Watts.
The DISPLAY button toggles the display to show either the station frequency or user entered station name. If no user name was entered the display will just flash once. 4. FM MUTE / MONO This button combines two functions; it switches the tuner from Stereo to Mono and disengages the mut- ing circuitry at the same time.
NA D 13 GB have a start of end position. Volume can also be adjusted from the remote control handset using the MASTER VOLUME Up or Down buttons (No. 4 in remote control drawing). The Volume control does not affect recordings made using the Tape, Video 3 and Video 4 outputs but will affect the signal going to the Pre-amp output (Audio Pre Out).
EXT. 5.1 Selects the multi-channel output signal from the DVD player or external decoder source (such as MPEG, for instance) connected to the 5.1 Ch. input as the active input. NOTE: No Ext. 5.1 audio signal is available from head- phones socket, the Tape, Video 3 and Video 4 out- puts when the Ext.
NA D 15 GB The 12 o’clock position is ‘flat’ with no boost or cut and a detent indicates this position. Rotate the control clockwise to increase the amount of Bass or Treble. Rotate the control anti- clockwise to decrease the amount of Bass or Treble.
sound to the speakers and headphones. Mute mode is indicated by “MUTING” flashing in red in the dis- play area. Press MUTE again to restore sound. Mute does not affect recordings made using the Tape out- puts but will affect the signal going to the Audio Pre- outs.
NA D 17 GB 11. CASSETTE DECK CONTROL (For use with single (DECK B) or double transport (A and B) NAD Cassette Decks). 1 or 2 engages Forward Play or Reverse Play. 0 / ; Record / Pause. Press to put cassette deck into record-pause. Press Play to start recording.
• The T 751 allows the volume of each speaker to be individually trimmed so that none of the speakers dominates in playback and detracts from the sur- round illusion. • Highlight the required speaker and adjust with 1 cursor to decrease and 2 cursor to increase the level, Each speaker can be adjusted within a -10 to +10dB range.
NA D 19 GB woofer. This preset is particularly useful for large rooms. Preset 2: Main - LARGE; Center - SMALL; Surround - SMALL; Subwoofer - OFF This preset is necessary for a home theater system that does not have a subwoofer. The bass frequen- cies from the center and surround channels are redi- rected to the main speakers.
Dolby Digital uses a dedicated Low Frequency Effects (LFE) channel. If a subwoofer has been selected, the LFE channel will be fed to the sub- woofer output. Channel Delays: For the best surround sound performance it is important that sound from all speakers reach the lis- tener’s ears at the same time.
NA D 21 GB generator to allow for adjustment of all speaker lev- els, so that each channel can be adjusted for equal loudness at your listening position. The test signal scrolls automatically with 5 second intervals from Left, Center, Right, Rear Right, Rear Left, to sub- woofer in continuous cycles.
NA D 22 GB NO SOUND • Power AC lead unplugged or power not switched on • Tape Monitor selected • Mute on • Check if AC lead is plugged in and power switched on • De-select Tape Monitor mode • Switch off Mute PROBLEM CAUSE SOLUTION TROUBLESHOOTING NO SOUND ON ONE CHANNEL • Speaker not properly connected or damaged.
NAD ELECTRONICS (NEW ACOUSTIC DIMENSION) LONDON © 2000. T 751 I.M. PRINTED IN THE PEOPLE’S REPUBLIC OF CHINA. P/N: 4301-4108-0.
An important point after buying a device NAD T 751751 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NAD T 751751 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NAD T 751751 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NAD T 751751 you will learn all the available features of the product, as well as information on its operation. The information that you get NAD T 751751 will certainly help you make a decision on the purchase.
If you already are a holder of NAD T 751751, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NAD T 751751.
However, one of the most important roles played by the user manual is to help in solving problems with NAD T 751751. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NAD T 751751 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
