Instruction/ maintenance manual of the product KLR 5000 Ashly
Go to page of 12
All Rights Reserved Rev 0.72110 KLR-Series Amplifiers KLR 2000, KLR 3200, KLR 4000, KLR 5000 Operator Manual Ashly Audio Inc. 847 Holt Road, Webster, NY 14580-9103 Toll Free (800) 828-6308, Telephone (585) 872- 0010, FAX (585) 872-0739 www.ashly.com All Trademarks referred to herein, ar e the property of their respective owners.
Page - 2 Operator Manual – KLR Series Amplifiers Copyright© 2010 – Ashly Audio Inc. Important Safety Instructions Consignes de sécurité à lire attentivement This power amplifier can produce dangerous output voltage, power and sound pressure levels.
Operator Manual – KLR Series Amplifiers Page - 3 All Rights Reserved Rev 0.72110 Introduction Congratulations on your purchase of an Ashly KLR-Series amplifier. The KLR-Series is made up of powerful, high-efficiency, lightwe ight amplifiers incorporating the latest technologies.
Page - 4 Operator Manual – KLR Series Amplifiers Copyright© 2010 – Ashly Audio Inc. The KLR Series KLR-Series amplifiers are high-efficiency, light weight high power amplifiers incorporating the latest amplifier technologies. The series provides a power range of 1000 to 2500 w atts per channel at 2 ohms (20Hz- 20kHz, 1% THD).
Operator Manual – KLR Series Amplifiers Page - 5 All Rights Reserved Rev 0.72110 Physical Description Each model in the KLR-Series is 2RU. The model number is indicated on the left side of the front panel Amplifier Front Panel 1. Mounting Holes – For r ack mounting.
Page - 6 Operator Manual – KLR Series Amplifiers Copyright© 2010 – Ashly Audio Inc. Installation KLR-Series amplifiers are designed for use in both fi xed and mobile sound systems.
Operator Manual – KLR Series Amplifiers Page - 7 All Rights Reserved Rev 0.72110 Typical Applications The most common use of a KLR-Series amplifier is a 2-channel source driving 2 speaker channels. In this illustration, the amplifier is receiving a stereo signal and is driving two stereo speakers.
Page - 8 Operator Manual – KLR Series Amplifiers Copyright© 2010 – Ashly Audio Inc. Connectors & Polarity KLR-Series amplifiers utilize three types of pr ofessional audio connectors.
Operator Manual – KLR Series Amplifiers Page - 9 All Rights Reserved Rev 0.72110 Speaker Connections Stereo Speaker Wiring In this mode, the amplifier’s channels operate fully independent of each other. Each signal enters the unit and is amplified separatel y and wired using different connectors.
Page - 10 Operator Manual – KLR Series Amplifiers Copyright© 2010 – Ashly Audio Inc. Troubleshooting Situation Indication Action Signal LED not lit Clip LEDs not lit Check AC plug. Confir m that AC outl et works by plugging in another devic e. Signal LED not lit Make sure the sig nal source is op erating and try another cable.
Operator Manual – KLR Series Amplifiers Page - 11 All Rights Reserved Rev 0.72110 Spec Table KLR 2000 KLR 3200 KLR 4000 KLR 5000 Power Output Per Channel Stereo Mode, both channels driven 8 Ω , 20.
Page - 12 Operator Manual – KLR Series Amplifiers Copyright© 2010 – Ashly Audio Inc. Ashly Audio Inc. LIMITED WARRANTY (USA ONLY) (Other countries please cont act your respective distributor or dealer.) For units purchased in the USA , warranty service for this unit shall be provided by ASHLY AUDIO, INC.
An important point after buying a device Ashly KLR 5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ashly KLR 5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ashly KLR 5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ashly KLR 5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Ashly KLR 5000 will certainly help you make a decision on the purchase.
If you already are a holder of Ashly KLR 5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ashly KLR 5000.
However, one of the most important roles played by the user manual is to help in solving problems with Ashly KLR 5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ashly KLR 5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
