Instruction/ maintenance manual of the product 300 N-Tron
Go to page of 13
12/29/2005 1 300 Series Media Converter & Industrial Ethernet Switches Installation Guide.
12/29/2005 2 Industrial Ethernet Switch In stallation Guid e 302MC-XX 302MCE-XX-YY 304TX 305FX-XX 305FXE-XX-YY 306TX 306FX2-XX 306FXE2-XX-YY 308TX Where: XX = ST or SC and YY = -15, -40, or -80.
12/29/2005 3 Copyright, © N-TRON Corp., 2005 820 S. University Blvd., Suite 4E Mobile, AL 36609 USA All rights reserved. Reproduction, adaptation, or translation without prior written permission from N-TRO N Corp. is prohibited, except as allowed under copyright laws.
12/29/2005 4 Safety Warnings ELECTRICAL SAFETY WARNING: Disconnect the power cable before removing the enclosure top. WARNING: Do not operate the unit with the top cover removed. WARNING: Do not work on equipment or cables during periods of lightning activity.
12/29/2005 5 Hazardous Location Installation Requirements 1. WARNING! Do not disconnect while circuit is live, unless area is known to be non-hazardous. 2. WARNING! Install only in accordance with Local & National Codes of Authorities Having Jurisdiction.
12/29/2005 6 300 Series Industrial Ethernet Switches The 300 Series Unmanaged Indu strial Ethernet Switches support high speed layer 2 switching between p orts.
12/29/2005 7 PACKAGE CONTENTS Please make sure the Ethernet Switch package contains the following items: 1. 300 Series Unit 2. N-Tron Product CD Contact your carrier if any items are damaged. INSTALLATION Read the following warning before beginning the installation: WARNING FXE units contain a class 1 laser.
12/29/2005 8 DIN-Rail Mounting Install the unit in a standard DIN-Rail. Recess the unit to allow at least 5” of horizontal clearance for fiber optic cable bend radius (2” for TX models).
12/29/2005 9 FRONT PANEL LNK Link LED for Fiber Optic Ports TX Fiber Optic Transmit Ports RX Fiber Op tic Receive Ports ACT Activity LED for Fiber Optic Ports RJ45 Ports Po rts 1-4 Auto sensing 10/100BaseT Connections Green LED lights when Power is connected NOTE: Each RJ45 data port has two LED’s for each connector.
12/29/2005 10 APPLYING POWER (Top View) Unscrew & Remove the DC Voltage Input Plug from the top header. Install the DC Power Cables into the Plug (observing polarity on unit). Plug the Voltage Input Plug back into the top header. All LED’s will flash ON Momentarily Verify the Power LED stays ON (GREEN).
12/29/2005 11 TROUBLESHOOTING 1. Make sure the (Power LED) is ON. 2. Verify that Link LED’s are ON for connected ports. 3. Verify cabling used between stations. 4. Verify that cabling is Category 5 (or greater) for 100Mbit Operation. 5. Verify TX is connected to far end RX and vise versa (fiber optic units only).
12/29/2005 12 KEY SPECIFICATIONS Physical Height: 3.98” (max.) Width: 2.01” (max.) Depth: 4.19” (max.) Weight: 0.75 lbs. Electrical Input Voltage: 10-30 VDC (Regulated) Input Current: 290mA max. @ 24VDC (Steady State) Inrush Current: 8.0A mp/0.6ms max.
12/29/2005 13 N-TRON Limited Warrant y N-TRON, Corp. warr ants to the end use r that this hardware product wil l be free from defects in workmanship a nd mate rials, under normal use and service, f or the applicable warranty period from the data o f purchase from N-TRON or its authorized reseller.
An important point after buying a device N-Tron 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought N-Tron 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data N-Tron 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, N-Tron 300 you will learn all the available features of the product, as well as information on its operation. The information that you get N-Tron 300 will certainly help you make a decision on the purchase.
If you already are a holder of N-Tron 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime N-Tron 300.
However, one of the most important roles played by the user manual is to help in solving problems with N-Tron 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device N-Tron 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
