Instruction/ maintenance manual of the product PageExpress A620 Mustek
Go to page of 16
• Before attempting to connect, operate or adjust this product, please save and read the User Manual completely . • The style of the product shown in the User Manual may be different from the actual unit due to various models.
2 Contents Safety Information.........................................................3 Package Content...........................................................4 Scanner Parts................................................................5 Preparation.
3 Safet y Infor mation • Keep away from water or moisture and dusty areas. • Never store in hot and very cold areas. • Only use attachments/accessories speci fi ed by the manufacturer . • No objects fi lled with liquids, such as vases, shall be placed on apparatus.
4 for purchasing this Standalone A4 Photo Scanner. With this new standalone scan-and-view technology , there’s no longer a need to install drivers and operate on a PC for scanning. Ideally you can view the scanned images directly on the 2.4” display screen, and then store the scanned images to a MMC or SD memory card.
5 Scanner P ar ts T op View Rear View Names Descriptions 1 Paper guide • Adjustable paper guide makes easy for guiding paper . 2 Feed slot • Feeds the paper or photo for scanning. 3 2.4” LCD screen • Views the scanned images. 4 Power ( MENU )/Menu • Press to turn the power to on or off.
6 Pr epar a tion 2. Press Power ( MENU ) button to bring up the USB Mode menu. Please insert a SD/MMC card! USB Mode Mass Storage USB Power Connecting to Power Using AC adapter Connect one end to the scanner ’s DC IN jack, and the other end to a power socket.
7 Inserting a SD/MMC Card Insert your SD or MMC card into the card slot with the gold contacts facing up. 3. Press UP ( ) /DOWN ( ) button to select USB Power , then press OK ( OK ) button. Rear View T urning the Power on Press Power ( MENU ) button to turn on the scanner .
8 Scan and Playbac k Scanner Setting 1. Press MENU ( MENU ) button to enter the scanner setting menu. 2. Press LEFT ( ) /RIGHT ( ) button to select Scan ( ) or Setup ( ) . 3. Press UP ( ) /DOWN ( ) button to select an option from the submenus. Note: Press MENU ( MENU ) button repeatedly to go to the upper level, or exit the Scan menu.
9 It is recommended to use the supplied photo protective sleeve for photo scanning. Please place the photo inside the protective sleeve. Make sure the sealed end goes fi rst into the feed slot for scanning. Note: Do not place the photo into the protective sleeve if the photo you wish to scan has been laminated.
10 Note 3: When scanning images with a dark background , the scanner may not be able to detect the images, or may crop the images in an undesirable way . Memory Full 3. The scanned image will appear on the screen of the scanner and will be saved into the inserted memory card.
11 3. Press LEFT ( ) /RIGHT ( ) button repeatedly to move to the previous or the next page. 4. Press UP ( ) /DOWN ( ) /LEFT ( ) /RIGHT ( ) button to select an image, and then press OK ( OK ) button to view the image in full screen. 1. Press ZOOM ( ) button to zoom in an i mage.
12 Playback Setting Menus Sub-menus De scr ipt io ns Playback ( ) Delete( ) Delete the scanned image(s): One( ), All( ). Rotate( ) Rotate the scanned image(s): Normal ( ), 90 degree( ), 180 degree ( ), or 270 degree ( ).
13 T r ansf er ring the Scanned Ima ges to PC A TTENTION: T o get proper connection with your PC and the unit, please turn the power off before making the connection. 1. Connect the mini USB connector to the scanner , and the master connector to PC. 3.
14 • T o get high image quality and good recognition results, please perform step 1, 2, 3 in that order prior to use if necessary . • Make sure the cleaning and calibration paper , and cleaning stick are clean without any dust before use. • Do not use any solvent to clean the sensor .
15 Step 3: Using the calibration paper 1. Insert the calibration paper with the white side DOWN into the feed slot. 2. Press MENU ( MENU ) button to bring up the System Menu . 4. Select OK ( OK ) to begin the calibration process. Note: The process will take few minutes to fi nish, and then shut down automatically .
16 Speci fi ca tion Scan Sensor Linear Color CIS Display 2.4” Color TFT LCD (480 x 234 pixels) Scan Size Minimum: 38.1mm x 50.8mm (1.5” x 2”) Maximum: 216mm x 356mm (8.5” x 14”) Scan Speed(A4 size) 10 sec at gray 300dpi 15 sec at color 300dpi Supported OS for Mass storage Windows XP / V ista / 7 Mac OS X (10.
An important point after buying a device Mustek PageExpress A620 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mustek PageExpress A620 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mustek PageExpress A620 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mustek PageExpress A620 you will learn all the available features of the product, as well as information on its operation. The information that you get Mustek PageExpress A620 will certainly help you make a decision on the purchase.
If you already are a holder of Mustek PageExpress A620, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mustek PageExpress A620.
However, one of the most important roles played by the user manual is to help in solving problems with Mustek PageExpress A620. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mustek PageExpress A620 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
