Instruction/ maintenance manual of the product KP100 Mustek
Go to page of 13
KB4000 / KP100 / SD100 MULTIFUNCTION SECURITY DEVICE USER’S MANUAL Rev. B MANUFACTURED BY: MUSTEK CORP. AN ISO-9001 AND ISO-14001 CERTIFIED MANUFACTURER.
SOME IMPORTANT NOTES FCC NOTES This equipment generates, uses, and can radiat e radio frequency energy and, if not installed and used in accordance with the instructions manua l, may cause interference to radio comm unications.
GENERAL DESCRIPTION OVERVIEW Table below indicates construction of this series of security devices. KB4000 KP100 SD100 Structure Stand alone Upgrade kit for Jiva (TP) series Programmable keypad Horizontal layout Vertical layout N.
• Magnetic Stripe Reader (MSR interface for SD100) ∗ ISO 7811 head reader for tracks 1 and 2 ∗ ISO 7811 reader head for tracks 2 and 3 ∗ ISO 7811 reader head for tracks 1, 2 and 3 ∗ JIS/II r.
INSTALLATION UNPACKING CONTENTS Items packed in for KB4000 KP100 SD100 The multifunction security device itself Yes Yes Yes Screws to hold the upgrade kit to Jiva series or TM4000 series or the like N.
You may find two screw holes on back of the right side of the main unit of Jiva series or TM4000 series or the like. Just align the upgrade unit on the right edge of the main unit after removing these 2 screws then replace them with the attached 2 screws and fasten them with washer as indicated in the picture below.
in SD100 could also be missing if the SD100 is purchased without the special type of MSR. Connect the USB connector of KB4000 to a USB hub or the USB port in a PC or a Posiflex POS system or touch monitor TM4000. Connect the USB connector of KP100 or SD100 to one of the USB ports of Jiva series or TM4000 in connector area.
If a PS/2 keyboard is to be used in Jiva series or TM4000 series with SD100 installed with iButton receptor, pl ease connect it to the female connector from SD100. However, should there be an y compatibility issue for this cascaded keyboard, please try use another brand keyboard or a USB key board for application.
OPERATION GUIDE SMART CARD READER Driver Installation The smart card reader device driver has to be installed before this device can be accessed by the application software. Please find the device driver from the Posiflex Product Information CD ROM that comes alone with KB4000 or the Jiva or TM4000 series that KP100 or SD100 is to be applied to.
type, each finger print has a central area around which the remainder of the pattern is distributed. This central area is the core of the finger print. Best performance is achieved when the core of the finger print is placed in the center of the sensor detection surface.
security device as drawn left with functions described in the table next page. The function for enabling each track of course comes in effect only when the track is physically available. The default status of JP1 for normal ISO reader delivery is: pin pairs 1- 2, 3-4 and 5-6 short while all the rest kept open.
When replacement of keytop is required, it is advisable to use a flattop (minus sign) screw driver (Do not use th e attached key clip for this operation.) to help getting the key top off gently. Pl ease alway s first orientate the key tops before inserting any keytop into the case of the keypad.
hardware manufacturer may be different from what actually made available for the end user, it provides a basic idea on programming of the key pad. To program the content of the keypad, please visit the manufacturer’s web site described.
An important point after buying a device Mustek KP100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mustek KP100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mustek KP100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mustek KP100 you will learn all the available features of the product, as well as information on its operation. The information that you get Mustek KP100 will certainly help you make a decision on the purchase.
If you already are a holder of Mustek KP100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mustek KP100.
However, one of the most important roles played by the user manual is to help in solving problems with Mustek KP100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mustek KP100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
