Instruction/ maintenance manual of the product iScan Air Go Mustek
Go to page of 21
For smartphones, tablets, and computers Wireless Handy Scanner All trademarks are the property of their respective owners and all rights are acknowledged. Images and screenshots used in this User Guide may vary according to the devices used and its operating system.
2 Safety and Precautions Discarded electrical and electronic appliances are recyclable and should separate from the household waste. Please actively support in conserving resources and protecting the environment by returning this appliance to the collection centers (if available).
3 Safety and Precautions ...................................................................................................... 2 Contents ................................................................................................................
4 Supported Devices The Scanner is compatible with following devices in the WiFi mode: iPad Air , iPad (4th generation), iPad (3rd generation), iPad 2, iPad, iPad mini with iOS 5.0 or later . iPhone 5S/5C, iPhone 5, iPhone 4S, iPhone 4, iPod touch with iOS 5.
5 Unpack Make sure following items are included. Scanner USB Cable (See p.15) Calibration Sheet (See p.17) AAA battery x 4 (See p.8) Cleaning Cloth (See p.
6 Scanner Parts POWER/SCAN Button MicroSD Card Slot Mini USB Port Battery Cover SQ/HQ Switch WiFi/MicroSD Switch Guide Scanning LED WiFi LED Power LED Guide Rollers Scanning Lens.
7 LED Messages Symbol LED Light Message Power LED Solid green The power is turned on. Blinking green The battery is low. Solid red Memory is full or unknown error happen. (Note: The scanner will hang, Free up some memory and restart the scanner to solve the problem.
8 Insert AAA Batteries 1. Push and slide the battery cover away to detach it from the base. 2. Place 4 alkaline batteries according to the polarity indicators inside the compartment. 3. Slide back the battery cover to close it. 4. Press and hold the / SCAN button for 3 seconds to turn on or off the scanner .
9 Set the Resolution Locate the SQ/HQ switch on the side of the Scanner . Slide the switch to “SQ” (Standard Quality) or “HQ” (High Quality) for scanning resolution. • Scanning at “HQ” mode will take a longer time to scan the image, and produce a larger files.
10 Set the Scanner Mode Locate the WiFi/MicroSD switch on the side of the Scanner . Slide the switch to “WiFi” or “MicroSD” for setting the scanner mode. In the WiFi mode, you can scan images directly to a supported device using direct WiFi connection.
11 Install the iScanAir Go app (WiFi Mode) The Scanner includes free iScanAir Go apps to scan images directly to your devices. Y ou need to install iScanAir Go from Internet to your device before use. • Ensure that your device has Internet access via your service provider or wireless connection.
12 Connect to Wireless Network (WiFi Mode) Y ou can make a direct wireless connection between the Scanner and your device in following steps. 1. Press and hold the /SCAN button for 3 seconds until the power LED emits green light. * Wait about 20 seconds until the LED blinks blue light.
13 Scan, Save, and Share (WiFi Mode) • Ensure the Scanner is switched to the “ WiFi ” mode on the side of the Scanner , and is connected to your device prior to use. (See p.10) • Make sure your device is supported. (See p.4) NOTES Scan 1.
14 Scan, Save, and Share (WiFi Mode) (cont'd) Save Press Save to save the image to your device’ s photo folder . * For Mac, save the image with a chosen file name, directory, and file format ( JPG or PDF ). * Press Cancel to exit without save or to re-scan.
15 Use as the Standalone Scanner (MicroSD Mode) • Ensure the Scanner is switched to the “ MicroSD ” mode on the side of the Scanner . (See p.10) NOTES 1.
16 Dirt and residues can build up on the Scanner’ s rollers and lens which can affect image quality . Clean Scanner’ s lens and rollers periodically to get the best result. Clean Lens and Rollers • Make sure the Cl ea ni ng C lo th i s cl e an b ef or e us e.
17 Calibrate • Always clean the Scanner’ s rollers and lens first before calibration. If cleaning rollers and lens did not improve image quality , then please per form calibration procedures. • If necessary , perform calibration few times until the image quality is improved.
18 Calibrate (cont'd) Calibrate in the MicroSD Mode 1. Slide the WiFi/Micro SD switch to “ MicroSD ”. 2. Press and hold the /SCAN button for 10 seconds until the WiFi LED blinks a purple light. 3. Remove the plastic foil on the Calibration Sheet, place it on the table with the white side facing up.
19 Helpful Hints Scanner does not turn on • Press and hold the /SCAN button 3 seconds to turn on. • Check if the Scanner’ s batter y has drained and no power is available. Scanner cannot connect to your device • T ry moving the Scanner closer to your device.
20 Scanner hangs with red power LED • Free up some memory and restart the scanner . On the Apple device, a message ‘iScanAir Go Would Like to Access Y our Photos’ appears after pressing SA VE button • This is a privacy settings requested by your device.
21 Specifications Scanner T ype A4 color handheld scanner Image Sensor Color CIS (Contact Image Sensor) Light Source LED (RGB) Scan Size (Max.) W 216mm x L 356 mm (W 8.
An important point after buying a device Mustek iScan Air Go (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mustek iScan Air Go yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mustek iScan Air Go - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mustek iScan Air Go you will learn all the available features of the product, as well as information on its operation. The information that you get Mustek iScan Air Go will certainly help you make a decision on the purchase.
If you already are a holder of Mustek iScan Air Go, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mustek iScan Air Go.
However, one of the most important roles played by the user manual is to help in solving problems with Mustek iScan Air Go. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mustek iScan Air Go along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
