Instruction/ maintenance manual of the product A1001 Musical Fidelity
Go to page of 8
Instructions For Use. Page 1 A1001 A1001 CLASS A SUPER INTEGRATED AMPLIFIER INSTRUCTIONS FOR USE Thank you for purchasing the Musical Fidelity A1001 Class A Super Integrated Amplifier. Used properly and carefully, it should give you many years of outstanding musical reproduction.
Instructions For Use. Page 2 A1001 PLEASE READ IMPORTANT! This unit is supplied in the UK with a mains lead fitted with a moulded 13 amp plug. If, for any reason, you need to cut off this plug, please observe the following safety precautions. Please dispose of the cut-off plug safely.
Instructions For Use. Page 3 A1001 BACK PANEL 7 Right speaker outputs 8 CD input 9 Tuner input 10 Aux 1 input 11 Aux 2 input 12 Aux 3 input 13 Tape input 14 Tape record output 15 Preamp output 16 Left.
Instructions For Use. Page 4 A1001 INSTALLATION BEFORE YOU SWITCH ON You should make all connections to the A1001 before switching on. Follow this routine before you listen for the first time, and each time you change any connections. 1 Check all the inputs and outputs to the A1001.
Instructions For Use. Page 5 A1001 USER INFORMATION doubling the power of your amplifier. SWITCH ON When you switch on the A1001 the unit will initially be in a muted state for a few seconds to allow the circuits to stabi- lise and to prevent any switch-on thumps etc.
Instructions For Use. Page 6 A1001 The tape machine's Tape/Line inputs go to the A1001's 'Tape Record' output. To record, simply select the required source with the source selector buttons on the front panel. The selected source will now be sent to the 'Tape Record' outputs for recording by the attached tape machine.
Instructions For Use. Page 7 A1001 TROUBLESHOOTING Basic troubleshooting of an amplifier is similar to troubleshooting of any other electrical or electronic equipment.
Instructions For Use. Page 8 A1001 SPECIFICATIONS Musical Fidelity reserves the right to make improvements which may result in feature or specification changes without notice. A1001 CLASS A SUPER INTEGRATED AMPLIFIER Power output 200W RMS per channel into 8 Ω 400W RMS per channel into 4 Ω Frequency response 10 Hz - 30kHz + 1dB THD < 0.
An important point after buying a device Musical Fidelity A1001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Musical Fidelity A1001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Musical Fidelity A1001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Musical Fidelity A1001 you will learn all the available features of the product, as well as information on its operation. The information that you get Musical Fidelity A1001 will certainly help you make a decision on the purchase.
If you already are a holder of Musical Fidelity A1001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Musical Fidelity A1001.
However, one of the most important roles played by the user manual is to help in solving problems with Musical Fidelity A1001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Musical Fidelity A1001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
