Instruction/ maintenance manual of the product CRW4260tx Musica
Go to page of 24
CRW4260tx CRW-4260tx POWER User Guide Guide de I’utilisateur Bedienungsanleitung.
COMPLIANCE INFORMA TION ST A TEMENT (DECLARA TION OF CONFORMITY PROCEDURE) Responsible P ar ty: Y amaha Systems T echnology , Inc. Address: 100 Centur y Center Cour t San Jose, Calif or nia 95112 T el.
T his output is value measured at a distance 200mm from the objective lens surface on the optical pick-up block. ANSI Class : Class 1 Material : GaAlAs Wavelength : 782-789 nm Emission Duration : Continuous Laser Output Power : Less than 44.
Important Precautions i Impor tant Precautions Please read the follo wing precautions before operating CR W4260tx. • Do not remov e the CR W4260tx’ s top cov er . This de vice uses semiconductor laser . Refer all servicing to qualified personnel.
Installation Precautions ii Installation Precautions • Install CR W4260tx on a le vel surface. • Do not install CR W4260tx near water , in direct sunlight, close to heating units, or in areas subject to high or low temperature extremes, e xcessive dust, vibration, or se vere shocks.
Operating Precautions iii Operating Precautions • Do not subject CR W4260tx to impact or shock when in use. This may impair recording or playback. • Do not place heavy objects on CR W4260tx.
Preventing Premature Disc Failure iv Preventing Premature Disc F ailure The NUMBER ONE cause of premature disc failure with recordable CDs is contamination of the recording surface before recording is completed.
Table of Contents v Table of Contents Introduction ............................................................................. 1 Accessories .................................................................... 1 CRW4260tx Features ..................
Introduction 1 Intr oduction Thank you for purchasing a Y amaha CR W4260tx drive. Please read this manual before using the driv e in order to mak e the best use of the superior CR W4260tx functions. After reading, please retain this manual for future reference.
Introduction 2 CR W4260tx Features ■ 2xS Recording (Re writable) - 4xS Recor ding (Recordab le) - 6xS Reading The CR W4260tx is able to write (overwrite) CD-R W discs at double speed, and is able to write CD-R discs at quad speed, double speed, or normal speed.
Introduction 3 Orange Book Compatible Recording T rack at Once In this mode, data can be recorded to disc one track at a time. Discs recorded i n this mode cannot be played in CD players or CD-R OM drives other than a CD-R W or CD-R driv e until the session is closed.
Chapter 1 - System Configuration 4 Chapter 1 - System Configuration In order to use the CR W4260tx, you will require the following. Computer The following operating en vironment is required: • An I.
Chapter 1 - System Configuration 5 Discs On the CR W4260tx, you can use con ventional CD-R W and CD-R discs that conform to the Recordable Compact Disc Systems Part 2 and P art 3 (Orange Book).
Chapter 2 - Touring Around CRW4260tx 6 Chapter 2 - T ouring Ar ound CR W4260tx Rear P anel 1 A C IN Connect the included power cable here. 2 CDR ID Use this switch to set a unique SCSI ID number for the CR W4260tx. 3 TERMINA T OR This switch is used to set termination.
Chapter 2 - Touring Around CRW4260tx 7 Front P anel 1 Disc tray The disc is inserted and ejected here. Pressing the eject button will open the tray . 2 Headphone jack This stereo mini jack allows you to connect headphones and listen to audio. 3 Headphone v olume control This control adjusts the volume le vel of the headphone output.
Chapter 3 - Installing the Yamaha CRW4260tx Drive 8 Chapter 3 - Installing the Y amaha CR W4260tx Drive CR W4260tx drive settings ♦ SCSI ID settings The SCSI ID number is used so that the computer will recognize a connected SCSI device. Y ou can assign 0 through 7 as the SCSI ID number .
Chapter 3 - Installing the Yamaha CRW4260tx Drive 9 Cable Connection P ower cable Insert the power cable securely to the “ AC IN” connector on the rear panel. SCSI cable Connect the SCSI cable to either of the CR W4260tx rear panel SCSI connectors (1) or (2), and connect the other end of the SCSI cable to the host computer .
Chapter 4 - Operation 10 Chapter 4 - Operation Loading a Disc 1. Press the eject button to open the tra y . 2. Carefully place the disc, label-side up, on the disc tray . 3. Press the disc tray softl y or press the eject b utton again to close the disc tra y .
Chapter 4 - Operation 11 Ejecting the Disc If the CR W4260tx is powered on: Press the eject button to eject the disc. Note: Y ou cannot eject the disc if the SCSI command pr ohibits the eject operation while the CRW4260tx is r eading data. Caution: Be sur e to remove the disc after it is completely ejected.
Chapter 4 - Operation 12 Manual Eject (emer gency use) Here we explain ho w to eject the disc when it cannot be ejected in the normal way; for example, the po wer is shut off inadv ertently or the loading mechanism fails. This technique should be used only as a last resort.
Troubleshooting 13 T r oubleshooting If CR W4260tx is not performing as expected, look up the symptoms in the follo wing table, and take the appropriate correctiv e action. Symptoms Corrective action The power to the CR W4260tx is off • Check the A C power cable connection.
Appendix 14 Specifications Specifications are subject to change without prior notice. Interface SCSI 2 Data Capacity 1.2m/sec: 666MB 1.4m/sec: 540MB Record/Read Speed Writing (CD-R W): 2X speed Writ.
Appendix 15 Fr ont P anel Indicator Ke y ● on: green ✦ f lashing: green — off ❍ on: orange ✧ f lashing: orange Status ON/DISC Read/Write Reset ❍ ➠ — ❍ ➠ — Ready (no disc) ❍ —.
English: If you hav e any questions, please contact your dealer or one of the following companies. French: Pour plus de détails sur les produits, veuillez v ous adresser à Y amaha ou au distributeur le plus proche figurant dans la liste suiv ante: German: Bei weiteren Fragen wenden Sie sich Sitte an Ihren Händler oder eine der folgenden Firmen.
An important point after buying a device Musica CRW4260tx (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Musica CRW4260tx yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Musica CRW4260tx - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Musica CRW4260tx you will learn all the available features of the product, as well as information on its operation. The information that you get Musica CRW4260tx will certainly help you make a decision on the purchase.
If you already are a holder of Musica CRW4260tx, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Musica CRW4260tx.
However, one of the most important roles played by the user manual is to help in solving problems with Musica CRW4260tx. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Musica CRW4260tx along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
