Instruction/ maintenance manual of the product VP130 Music Hall
Go to page of 2
USER GUIDE VP130 Tube Phono Preamp SPECIFICATIONS I/ O Connectors: RCA, 1/4" TRS Stereo Input Sensitivity: 30 dB gain @ 1kHz, 47k ohms Input Z Input Impedance: 50k ohms Output Impedance: 8 ohms Headphone, 100 ohms RCA Max Output Level: >10dB @ 1kHz at .
INTRODUCTION Thank you for your purchase of the Bellari VP130 Tube Phono Preamp. The VP130 is designed to amplify an RIAA equalized phono signal to a Hi-Fi level signal, and is intended for magnetic pickups. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preampli fi ers.
An important point after buying a device Music Hall VP130 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Music Hall VP130 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Music Hall VP130 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Music Hall VP130 you will learn all the available features of the product, as well as information on its operation. The information that you get Music Hall VP130 will certainly help you make a decision on the purchase.
If you already are a holder of Music Hall VP130, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Music Hall VP130.
However, one of the most important roles played by the user manual is to help in solving problems with Music Hall VP130. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Music Hall VP130 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
