Instruction/ maintenance manual of the product 22" Self-Propelled Murray
Go to page of 40
The owner must be certain that all the product information is included with the unit. This information includes the INSTRUCTION BOOKS, the REPLACEMENT P ARTS and the W ARRANTIES. This information must be included to make sure state laws and other laws are followed.
2 F-04041 1L MURRA Y , INC. T wo Y ear Limited Warranty Murray , Inc. warrants to the original purchaser that this unit shall be free from defects in ma- terial and workmanship under normal use and se.
OWNER’S INFORMA TION 3 F-04041 1L This instruction book is written for a person with some mechanical ability . Like most service books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability .
IMPORT ANT 4 F-04041 1L Safe Operation Practices for W alk-Behind Mowers. This cutting machine is capable of amputating hands and feet and throwing objects. Failure to ob- serve the following safety instructions could result in serious injury or death.
IMPORT ANT 5 F-04041 1L DO NOT : Do not mow near drop-offs, ditches, or em- bankments. The operator could lose footing or balance. Do not mow excessively steep slopes. Do not mow on wet grass. Reduced footing could cause slipping. III. Children Tragic accidents can occur if the operator is not alert to the presence of children.
SAFE MOWING GUIDE 6 F-04041 1L Every person who uses power equipment must learn the difference between proper and improper use, safe and unsafe mowing prac- tices.
SAFE MOWING GUIDE 7 F-04041 1L bruises, or even put out an eye. Often the per- so n hurt by a thrown object is a bystander such as a child, another family member or a neigh- bor . Keep people and pets completely away from the mowing area. Direct the mower’s dis- charge away from areas where people can b e.
SAFE MOWING GUIDE 8 F-04041 1L Use only original equipment or approved sub- stitutions as service parts. If you need profes- sional service, select a shop that is an Authorized Service Center for your brand of mower . If you plan to service the unit yourself, follow directions in the Instruction Book.
SAFE MOWING GUIDE 9 F-04041 1L While mowing, if you hit a foreign object, stop th e engine. Remove the spark plug wire. Care- fully and thoroughly inspect the mower for damage. Make necessary repairs before re- starting. If the unit starts to vibrate abnormally , stop the engine immediately and check for the cause.
STEPS T O FOLLOW 10 F-04041 1L BEFORE MOWING D Be sure to dress correctly . Wear hard shoes, not sandals or tennis shoes. D Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade. D Fill the fuel tank outside.
PREP ARA TION 11 F-04041 1L UNP ACKING INSTRUCTIONS Th e mower was fully assembled at the factory . When the mower was put in the carton, the handle was put in the storage position. T o put the handle in the operating position, follow the steps below .
PREP ARA TION 12 F-04041 1L HOW TO ADJUST THE HANDLE HEIGHT The handle bracket has two assembly posi- tions. A HIGH and a LOW position (Figure 3). The HIGH position will raise the handle ap- proximately four inches. Figure 3 LOW HIGH 1. Remove the knobs and bolts from the right and left handle brackets (Figure 4).
PREP ARA TION 13 F-04041 1L MODELS WITH OPTIONAL GRASS BAG HOW TO ASSEMBLE THE GRASS BAG 1. Slide the frame assembly into the ends of the support tube (Figure 7). 2. Make sure the handle is on the outside of the grass bag (Figure 8). 3. Attach the clips to the frame assembly (Figure 8).
PREP ARA TION 14 F-04041 1L MODELS WITH OPTIONAL GRASS BAG HOW TO MOUNT THE GRASS BAG 1. T o mount the grass bag on the mower , raise the rear door . Hold the handle of the grass bag. Put the grass bag in the operating position (Figure 10). Lower the rear door .
PREP ARA TION 15 F-04041 1L HOW TO A TT ACH THE SIDE MOUNTED DISCHARGE DEFLECTOR W ARNING: T o prevent the en- gine from starting, disconnect the wire from the spark plug. 1. Raise the mulcher cover (Figure 12). 2. Slide the two tabs on the side deflector u n - der the pivot pin.
PREP ARA TION 16 F-04041 1L ELECTRIC ST ART MODELS When the mower was shipped from the facto- ry, the battery was not fully charged. Before the first use, the battery must be charged for 16 hours. See “How T o Charge The Battery” in the Maintenance section.
OPERA TION 17 F-04041 1L ENGINE ST OP LEVER Release the engine stop lever and the engine and the blade will automatically stop. T o run the engine, hold the engine stop lever in the Operating position (Figure 17). Before you start the engine, operate the en- gine stop lever several times.
OPERA TION 18 F-04041 1L HOW TO ST ART ENGINE W ARNING: The blade will rotate when the engine runs. IMPORT ANT : Before you start the engine, operate the engine stop lever several times. Make sure the engine stop cable moves freely . NOTE: The engine design does not include a throttle control or an engine speed ad- justment.
MAINTENANCE 19 F-04041 1L ELECTRIC ST ART MODELS HOW TO CHARGE THE BA TTERY W ARNING: The battery contains sulfuric acid which is harmful to the skin, eyes and clothing. If acid gets on the body or cloth- ing, wash with water . Do not at- tempt to open the battery .
MAINTENANCE 20 F-04041 1L ENGINE MAINTENANCE Us e the following maintenance section to keep your unit in good operating condition. All the maintenance information for the engine is in th e “Engine Instruction Book”. Before you start the engine, read this book.
MAINTENANCE 21 F-04041 1L HOW TO REMOVE THE DRIVE BEL T W ARNING: Before you remove the belt, disconnect the wire from the spark plug. 1. Remove the belt cover (Figure 24). 2. Loosen the belt tension bolt (Figure 25). 3. Remove the front of the drive belt from the transmission pulley .
MAINTENANCE 22 F-04041 1L HOW TO ADJUST THE DRIVE CABLE W ARNING: Before you adjust the drive cable, release the engine stop lever and wait for the engine to stop. If the drive system does not engage and disen- gage correctly , check the handle for correct as- sembly .
MAINTENANCE 23 F-04041 1L BLADE SER VICE W ARNING: Before you inspect the blade or the blade adapter , disconnect the wire to the spark plug. If the blade hits an object, stop the engine. Disconnect the wire to the spark plug. Check the unit for damage.
MAINTENANCE 24 F-04041 1L Ground Blade is balanced when parallel to the ground. Screwdriver Blade File Figure 30 CHECK THE LEVEL OF CUT T es t the unit in a small area.
TROUBLE SHOOTING CHART 25 F-04041 1L The Engine will not start. 1. Move the throttle control lever to the F AST or ST ART position. 2. Make sure the fuel tank is filled with clean gasoline. Do not use old gasoline. 3. On a cold engine, push the primer button (optional on some models) five times.
NOTES 26 F-04041 1L.
NOTES 27 F-04041 1L.
MULCHER MODELS 28 F-04041 1L 1 2 3 4 5 6 7 8 10 11 12 13 23 25 24 26 45 46 24 25 23 34 37 42 40 41 39 38 34 32 31 30 29 62 29 28 31 30 44 43 44 48 49 50 51 54 50 53 59 61 60 59 58 57 55 52 14.
MULCHER MODELS 29 F-04041 1L KEY NO. P ART NO. DESCRIPTION KEY NO. P ART NO. DESCRIPTION 1 1 101340E717 Housing 2 − − − − − Engine * 3 1 101653 Pulley , Drive 4 1 101331 1 101332 Spacer , En.
SIDE DISCHARGE MODELS 30 F-04041 1L 1 2 3 4 5 6 7 8 10 11 12 13 23 25 24 26 45 46 24 25 23 34 37 42 40 41 39 38 34 32 31 30 29 62 29 28 31 30 44 43 44 48 49 50 51 54 50 53 59 61 60 59 58 57 55 52 66 7.
SIDE DISCHARGE MODELS 31 F-04041 1L KEY NO. P ART NO. DESCRIPTION KEY NO. P ART NO. DESCRIPTION 1 1 101340E717 Housing 2 − − − − − Engine * 3 1 101653 Pulley , Drive 4 1 101331 1 101332 Spac.
MULCHER MODELS WITH 14” REAR WHEELS 32 F-04041 1L 52 46 23 56 54 53 46 44 42 45 44 44 24 37 25 34 49 7 44 62 38 30 47 39 40 41 61 59 58 59 1 43 48 50 50 57 60 2 3 8 4 28 26 34 32 31 29 23 24 30 25 6.
MULCHER MODELS WITH 14” REAR WHEELS 33 F-04041 1L KEY NO. P ART NO. DESCRIPTION KEY NO. P ART NO. DESCRIPTION 1 − − − − − Housing 2 − − − − − Engine * 3 1 101653 Pulley , Drive 4.
SIDE DISCHARGE MODELS WITH 14" REAR WHEELS 34 F-04041 1L 52 46 23 56 54 53 46 44 42 45 44 44 24 37 25 34 49 7 44 62 38 30 47 39 40 41 61 59 58 59 1 43 48 50 50 57 60 2 3 8 4 28 26 34 32 31 29 23 .
SIDE DISCHARGE MODELS WITH 14" REAR WHEELS 35 F-04041 1L KEY NO. P ART NO. DESCRIPTION KEY NO. P ART NO. DESCRIPTION 1 1 101340E717 Housing 2 − − − − − Engine * 3 1 101653 Pulley , Driv.
HANDLE - RECOIL-ST ART MODELS 36 F-04041 1L 1 2 3 4 8 12 13 16 5 6 5 29 31 7 KEY NO. P ART NO. DESCRIPTION KEY NO. P ART NO. DESCRIPTION 1 1 101557E701 1 101557E724 Handle, Upper (Black) Handle, Upper.
HANDLE - ELECTRIC-ST ART MODELS 37 F-04041 1L 1 2 3 4 8 12 13 27 17 18 20 21 22 23 24 25 26 10 16 5 6 5 29 31 7 11 KEY NO. P ART NO. DESCRIPTION KEY NO.
GRASS BAG 38 F-04041 1L 1 2 3 KEY NO. P ART NO. DESCRIPTION 1 1 101075 T ube, Bag 2 1 101074 Frame Assembly 3 1 101005 Bag, Cloth.
39 F-04041 1L.
HOW TO ORDER REP AIR P ARTS F-04041 1L Only use a factory repair part. Repair parts, except for the engine or the transmission, are available from the store where the unit was purchased, a service shop recommended by the store, or an authorized service shop found in the yellow pages of the telephone directory .
An important point after buying a device Murray 22" Self-Propelled (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murray 22" Self-Propelled yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murray 22" Self-Propelled - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murray 22" Self-Propelled you will learn all the available features of the product, as well as information on its operation. The information that you get Murray 22" Self-Propelled will certainly help you make a decision on the purchase.
If you already are a holder of Murray 22" Self-Propelled, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murray 22" Self-Propelled.
However, one of the most important roles played by the user manual is to help in solving problems with Murray 22" Self-Propelled. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murray 22" Self-Propelled along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
