Instruction/ maintenance manual of the product W0162 Murphy
Go to page of 2
CMNS-97077B page 1 of 2 W0162 and W0163 ■ Includes Swichgage Instruments for Critical Engine Protection ■ Complete and Ready to Install ■ Provision for Throttle Cable ■ Fits B and C-Series Open or Closed Power Units 6-1/16 in. (154 mm) 4 in. (102 mm) FRONT VIEW SIDE VIEW 16-1/4 in.
CMNS-97077B page 2 of 2 INST ALLA TION INSTRUCTIONS Open Power Unit 1. Remove battery ground and secure to prevent unintentional contact. 2. Attach oil line to pressure Swichgage. Use sealant tape or pipe dope. CAUTION: Do not allow sealant to plug pressure Swichgage orifice.
An important point after buying a device Murphy W0162 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy W0162 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy W0162 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy W0162 you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy W0162 will certainly help you make a decision on the purchase.
If you already are a holder of Murphy W0162, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy W0162.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy W0162. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy W0162 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center