Instruction/ maintenance manual of the product SM3 Murphy
Go to page of 4
SM Series T ANKTEND TM Systems Installation and Operation Instructions Models: SM1, SM1VR, SM2, SM2VR, SM3, SM3VR, SM4, SM4VR TSM-95129N Revised 01-97 Section 15 (00-02-2019) The SM Series System can monitor above or below ground, single or multi-tank systems (4 tanks maximum).
INSTALLATION 2 Installing a T ank Plug Kit (all models) The tank plug kit includes 12 ft. (3.6 m) x 1/4 in. (6 mm) dia. stainless steel tube and fittings. Tank plug is available in 2 NPT or 4 NPT. 1. Locate tank(s) service cover and install a UTKN tank plug kit for each tank.
Installing the CKBO Check V alve The optional CKBO check valve is designed to prevent product from backing up into the gage(s). We recommend installing the CKBO valve at top of the tank plug as follows (refer to Detail C ): 1. Determine a location for the valve.
INSTALLATION Continued 4 Operation Sequence 1. Make sure that the pump assembly is connected to a power source, either 120 VAC or 230 VAC according to the pump model used. 2. Depress the read button, located next to the gage(s) and hold until the gage pointer stops traveling across the scale.
An important point after buying a device Murphy SM3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy SM3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy SM3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy SM3 you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy SM3 will certainly help you make a decision on the purchase.
If you already are a holder of Murphy SM3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy SM3.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy SM3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy SM3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
