Instruction/ maintenance manual of the product Selectronic Tattletale Annunciator ST8 Murphy
Go to page of 4
ST-94112N page 1 of 4 Installation and Operation Instructions for SELECTRONIC ® T A TTLET ALE ® Annunciator Model ST8 ST-94112N Revised 07-04 Section 25 (00-02-0758) Description The ST8 is an eight point TATTLETALE ® panel designed to give “first out” indication of cause of alarm or shutdown.
ST-94112N page 2 of 4 MOUNTING 1. Cut a hole in the panel according to the mounting hole dimen- sions shown below . 2. Install the flush mount mounting bracket on the T A TTLET ALE ® . 3. Insert the T A TTLET ALE ® into the hole through the front of the panel.
ST-94112N page 3 of 4 ELECTRICAL A B Battery Run Remove jumper from terminals 12 and 13 and set individual sensor Lockout Switch for a 25 to 35 second lockout time delay during startup (see page 4 Setting Lockout Switches ).
ST-94112N page 4 of 4 BASIC OPERATION ST8 1. Apply power to the ST8 TATTLETALE ® (terminals 13 and 14). 2. The “POWER ON” and “RUN” LED light will switch On. The “POWER ON” LED indicates power has been applied to the ST8. The “RUN” LED indicates the internal relay is in the operating mode.
An important point after buying a device Murphy Selectronic Tattletale Annunciator ST8 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy Selectronic Tattletale Annunciator ST8 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy Selectronic Tattletale Annunciator ST8 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy Selectronic Tattletale Annunciator ST8 you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy Selectronic Tattletale Annunciator ST8 will certainly help you make a decision on the purchase.
If you already are a holder of Murphy Selectronic Tattletale Annunciator ST8, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy Selectronic Tattletale Annunciator ST8.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy Selectronic Tattletale Annunciator ST8. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy Selectronic Tattletale Annunciator ST8 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
