Instruction/ maintenance manual of the product S14E-92229N Murphy
Go to page of 2
Information for Four Stage ENGINE Driven Compressor Applications Attachment to Installation and Operation Manual for SELECTRONIC ® Annunciator Series 1400 ® S14E-92229N Revised 06-93 TYPICAL WIRING .
RUN PRE/POST-LUBE 5.0 MIN. REMAIN PERMISSIVE START CLASS-B TIMER 5.0 MIN. REMAIN LOSS OF RUN SIGNAL SYSTEM READY By pressing the START/STOP key the S1400 will scan all Class “A” functions for shutdown. POWER UP THE SYSTEM : Make sure the D-sub miniature connector from power and control cable is secured to the back of the S1400 module.
An important point after buying a device Murphy S14E-92229N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy S14E-92229N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy S14E-92229N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy S14E-92229N you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy S14E-92229N will certainly help you make a decision on the purchase.
If you already are a holder of Murphy S14E-92229N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy S14E-92229N.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy S14E-92229N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy S14E-92229N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center