Instruction/ maintenance manual of the product MTH6 Murphy
Go to page of 2
Model MTH6 T ach/Hourmeter Overspeed Switch Installation and Operation Instructions MTH-96116N Revised 04-05 Section 20 (00-02-0778) Description Microprocessor-based di gital tachometer and hourmeter with a built-in overspeed switch. This M urphy instrument is highly accurate and depend- abl e.
MTH-96116N page 2 of 2 WIRING AND OPERATION Wiring the MTH6 Refer to Typical Wiring Diagram, below. Operation Sequence and Adjustments When power is applied, the MTH6 performs an LCD test displaying counting down to zero within 3 seconds. The MTH6 will perform a normal scan, and will begin to monitor engine RPM.
An important point after buying a device Murphy MTH6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy MTH6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy MTH6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy MTH6 you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy MTH6 will certainly help you make a decision on the purchase.
If you already are a holder of Murphy MTH6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy MTH6.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy MTH6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy MTH6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center