Instruction/ maintenance manual of the product MeCAN I/O Module MEC300-1 Murphy
Go to page of 3
BEFORE BEGINNING I NST ALLA TION OF THIS PRODUCT Discon nect all elect rical power to the machine Make sure the machine cannot operate du ring installat ion Follow all saf ety warnin gs of t he machin.
FW Murphy – MeCAN MEC300 installation instructions 00-02-0665 28 th November 2008 p2/3 ELECTRICAL CONNECTION & CONFIGURATION Electrical connection MeCAN connection is via 9 colour-coded flying leads (see diagram on page 1).
FW Murphy – MeCAN MEC300 installation instructions 00-02-0665 28 th November 2008 p3/3 Operation MeCAN begins transmitting J1939 CANbus data immediately after power-up. Data can be view ed using a J1939 compatible display, e.g. the Murphy PV 101, or used as part of a J1939 control system, e.
An important point after buying a device Murphy MeCAN I/O Module MEC300-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy MeCAN I/O Module MEC300-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy MeCAN I/O Module MEC300-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy MeCAN I/O Module MEC300-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy MeCAN I/O Module MEC300-1 will certainly help you make a decision on the purchase.
If you already are a holder of Murphy MeCAN I/O Module MEC300-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy MeCAN I/O Module MEC300-1.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy MeCAN I/O Module MEC300-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy MeCAN I/O Module MEC300-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
