Instruction/ maintenance manual of the product Generator Control System MGC2000 Murphy
Go to page of 4
MGC-02029B Revised 06-03 Catalog Section 75 (00-02-0500) Generator Control System FW Murphy Description The compact and powerful MGC2000 generator control system features a unique, simple-to-install and setup design and enhanced operation.
Power supply: • Continuous voltage range: 8-35 VDC • Brown out voltage < 5 VDC for 2 secs ( recovery to 8V) • Blackout voltage: 0 V for 50mS (from 10V, recovery to 5V) • Overvoltage withsta.
• DC Voltmeter* • DC Ammeter* • Hourmeter* • Relays. 4 relays, wired for Preheat, Crank, Fuel, and Common Alarm • Keyswitch • Phase select switch, standard for 3-phase units, optional for single- phase units.
MGC-02029B page 4 of 4 How to Order the MGC2000 Phases 1 = Single Phase 3 = Three Phase Base Model MGC2000 = Mechanical Gages MGC2000E = Electric Gages Controller A = Autostart M = Manual DC Voltage 1.
An important point after buying a device Murphy Generator Control System MGC2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy Generator Control System MGC2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy Generator Control System MGC2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy Generator Control System MGC2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy Generator Control System MGC2000 will certainly help you make a decision on the purchase.
If you already are a holder of Murphy Generator Control System MGC2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy Generator Control System MGC2000.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy Generator Control System MGC2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy Generator Control System MGC2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
