Instruction/ maintenance manual of the product AS710S Murphy
Go to page of 2
AUTOSTART 710 (AS710S) series PROGRAMMABLE GENERATOR CONTROLLER The Autostart 710 provides the control features needed for the automatic start, load transfer and shutdown of a standby generator or pump. Microprocessor technology allows the Autostart 710 to be programmed for use in a wide range of engine and generator control applications.
Programmable functions The Autostart 710 has over 30 programmable functions:- Timers :- Start delay; preheat, crank and crank cool (dwell) times; alarm override time; warm-up delay, mains restore delay; engine cool (run on, off load) time, speed signal delay.
An important point after buying a device Murphy AS710S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy AS710S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy AS710S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy AS710S you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy AS710S will certainly help you make a decision on the purchase.
If you already are a holder of Murphy AS710S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy AS710S.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy AS710S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy AS710S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
