Instruction/ maintenance manual of the product AS705S Murphy
Go to page of 2
AUTOSTART 705 (AS705S series) PROGRAMMABLE GENERATOR CONTROLLER The Autostart 705 provides the control features for the automatic or manual starting, load transfer and shutdown of a standby diesel generator or pump.
Programmable functions The Autostart 705 has over 40 programmable functions:- Timers :- Start delay; preheat, crank and crank cool (dwell) times; fault override time; warm-up delay, mains restore delay; engine cool (run on, off load) time, speed signal delay.
An important point after buying a device Murphy AS705S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Murphy AS705S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Murphy AS705S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Murphy AS705S you will learn all the available features of the product, as well as information on its operation. The information that you get Murphy AS705S will certainly help you make a decision on the purchase.
If you already are a holder of Murphy AS705S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Murphy AS705S.
However, one of the most important roles played by the user manual is to help in solving problems with Murphy AS705S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Murphy AS705S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
