Instruction/ maintenance manual of the product MTCBA-G-F1 Multitech
Go to page of 16
MultiModem ® GPRS & CDMA Exter nal Wireless Modems MTCBA-G-F1 MTCBA-G-F2 MTCBA-C Quick Start Guide.
MultiModem ® GPRS & CDMA Quick Start Guide 2 MultiModem GPRS, MultiModem CDMA Series Quick Start Guide PN: 82001225 L Rev. F Copyright ©2006 by Multi-Tech Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior written permission from Multi-Tech Systems, Inc.
3 MultiModem ® GPRS & CDMA Quick Start Guide Introduction This guide shows you how to setup your Multi-Tech wireless MultiModem. For detailed information, product specification, troubleshooting tips, and warranty repair policies, see the User Guide, available on the MultiModem CD accompanying your wireless modem.
MultiModem ® GPRS & CDMA Quick Start Guide 4 • Switch OFF the MultiModem in the vicinity of gasoline or diesel-fuel pumps or before filling a vehicle with fuel. • Switch OFF the MultiModem in hospitals and any other place where medical equipment may be in use.
5 MultiModem ® GPRS & CDMA Quick Start Guide • “W ARNING - EXPLOSION HAZARD - Do not Disconnect Equipment Unless P o wer has been s witched off or the area is known to be Non - Hazardous”. • “W ARNING - EXPLOSION HAZARD - Do not replace the Fuse Unless P ow er has been s witched off or the area is known to be Non - Hazardous”.
MultiModem ® GPRS & CDMA Quick Start Guide 6 Maintenance of the Wireless MultiModem Your Wireless MultiModem is the product of advanced engineering, design and craftsmanship and should be treated with care. The suggestions below will help you to enjoy this product for many years.
7 MultiModem ® GPRS & CDMA Quick Start Guide Package Contents Basic Package • one modem • two holding bridles (mounting brackets) • one fused power cable Bundled Package • all of the abov.
MultiModem ® GPRS & CDMA Quick Start Guide 8 Attaching MultiModem to a Fixed Location 1. Typically, the MultiModem is mounted against a flat surface with two mounting screws. Drill the mounting holes at the desired location separated by 125mm (4 -15/16 inches) center-to-center.
9 MultiModem ® GPRS & CDMA Quick Start Guide clearance under the RS232 cable. Maximum mounting screw-head thickness is 2mm. = 2 mm Sc r e w He a d Cl ear a nc e Si de Vi ew Inserting the SIM Card into the Holder The wireless MultiModem requires a SIM card (Subscriber Identity Module) to operate on a GSM network.
MultiModem ® GPRS & CDMA Quick Start Guide 10 3. Verify that the SIM card fits into the holder properly and then replace the cover. Connecting the Antenna Connect a suitable antenna to the SMA connector (see “Antenna/RF Specifications” in the User Guide ).
11 MultiModem ® GPRS & CDMA Quick Start Guide Connecting the Serial Cable Connect both ends of the serial and control cable (15-pin Sub D connector on the modem end).
MultiModem ® GPRS & CDMA Quick Start Guide 12 Connecting the Power Supply Cable 1. Plug the power supply cable into the wireless MultiModem. Fused DC Power Cable In-Line Fuse 31.75 (1.25) 6.35 (.25) Fuse Recommended Replacement Fuses: 1. Manufacture: Littelfuse Part Number: 313 02.
13 MultiModem ® GPRS & CDMA Quick Start Guide Note: For automotive applications: according to the type of application, you can use permanent “+” or key-switched “+”. Connect the power supply to its source (for example, in a mobile situation, to the vehicle’s DC fuse/terminal block).
MultiModem ® GPRS & CDMA Quick Start Guide 14 For CDMA point to point data , a circuit-switched data connection is used. The user can set up DUN to make a conventional V.
15 MultiModem ® GPRS & CDMA Quick Start Guide.
82001225L Patents This device is covered by one or more of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5,815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,62.
An important point after buying a device Multitech MTCBA-G-F1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multitech MTCBA-G-F1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multitech MTCBA-G-F1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multitech MTCBA-G-F1 you will learn all the available features of the product, as well as information on its operation. The information that you get Multitech MTCBA-G-F1 will certainly help you make a decision on the purchase.
If you already are a holder of Multitech MTCBA-G-F1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multitech MTCBA-G-F1.
However, one of the most important roles played by the user manual is to help in solving problems with Multitech MTCBA-G-F1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multitech MTCBA-G-F1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
