Instruction/ maintenance manual of the product SHS81A Multiquip
Go to page of 68
Re vision #0 (01/30/08) SideWinder MODEL SHS81A CUT -OFF SA W THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .
Engine e xhaust and some of its constituents, and some dust created of Calif ornia to cause cancer , bir th defects and other repr oductive harm. b y po wer sanding, sa wing, grinding, drilling and other construction activities contains chemicals kno wn to the State Some e xamples of these chemicals are: Lead fr om lead-based paints.
NO TE P A GE.
P A GE 4 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — T ABLE OF CONTENTS STOW — SHS81A CUT -OFF SA W Proposition 65 W ar ning ............................................. 2 T ab le Of Contents .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 5 P ARTS ORDERING PR OCEDURES Eff ective: J une 1 st , 2005 When ordering parts, please supply the following informati.
P A GE 6 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — SAFETY MESSA GE ALERT SYMBOLS Safety precautions should be followed at all times when operating this equipment.
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 7 Accidental Starting AL W A YS place the engine ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine gov e rnor or settings.
P A GE 8 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SAFETY ■ DO NOT operate or service this equipment before reading this entire manual . ■ This equipment should not be operated by persons under 18 years of age.
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 9 ■ AL W A YS wear proper respirator y (mask), hear ing and e ye protection equipment when operating the saw . ■ AL W A YS hold the sa w with both hands when the engine is running.
P A GE 10 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — RULES FOR SAFE OPERA TION ■ NEVER leave the machine unattended while running. ■ NEVER run the engine without the air filter . Se vere engine damage could occur .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 11 SHS81A CUT -OFF SA W — RULES FOR SAFE OPERA TION EMERGENCIES ■ AL W A YS know the location of the nearest fire extinguisher . ■ AL W A YS know the location of the nearest first aid kit .
P A GE 12 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — SPECIFICA TIONS s n o i t a c i f i c e p S w a S f f o - t u C A 1 8 S H S .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 13 SHS81A CUT -OFF SA W — DECAL PLA CEMENT Machine Operation And Safety Decals The SHS81A CUT -OFF SA W is equipped with a number of operation and safety decals (Figure 1).
P A GE 14 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — CONTROLS & COMPONENTS 7. Roller Wheel – Allo ws for easy free mo vement of the sa w when cutting on a flat surface. 8. V -belt Cover (Clutch) – Unscrew these 2 nuts to remo v e the clutch V -belt cov e r .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 15 SHS81A CUT -OFF SA W — CONTROLS & COMPONENTS 13. Blade Guard – Covers saw blade. 14. Front Handle – When lifting or carr ying of the saw is required, use this handle.
P A GE 16 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) The Multiquip Side Winder Cut-Off Saw comes with a T ool Kit (Figure 4) that assists you with da y to da y operations. Y ou will need these tools f or the assemb ly of y our sa w .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 17 SHS81A CUT -OFF SA W — W A TER KIT INST ALLA TION INSTRUCTIONS Figure 9.
P A GE 18 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) W ARNING F ailure to thoroughly inspect the diamond blade (Figure 12) for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area.
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 19 The CLOSED position of the choke lever enriches the fuel mixture for starting a COLD engine. The OPEN position provides the correct fuel mixture for normal operation after starting, and for restarting a warm engine.
P A GE 20 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) Shut-down 1 . Let the engine idle for 3-5 minutes. 2 . Place the engine ON/OFF switch to the OFF position 3 . W ait for the b lade to stop spinning before handling the saw .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 21 SHS81A CUT -OFF SA W — MAINTENANCE Figure 17. Drive V -Belt Figure 14. Belt Guard Cover Removal Remove the 2 hex nuts L and hex screw and washer M to gain access to the V -belt on the clutch side.
P A GE 22 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) Figure 19. Re-Installing Cover Guard Re-install the guar d K and V -belt co vers . Fully tighten the two cap screws J and reinstall the adjustment knob I .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 23 Reversing the Cutting Arm Procedure NOTE This assembly procedure permits the operator to reorient the cutting blade closer to a wall, column and/or object.
P A GE 24 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) Reverse the cutting arm 180 degrees as shown in the Figure 23, and re-tension the V -belt by turning the belt tensioning cam . The V -belt should remain in tension.
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 25 SHS81A CUT -OFF SA W — MAINTENANCE (AIR/FUEL FIL TER) Figure 25. Fuel Filter Air/Fuel Filter Maintenance Procedures Check the fuel filter G located inside the fuel tank periodically for dirt/debris build up.
P A GE 26 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — TROUBLESHOO TING (BLADE) G N I T O O H S E L B U O R T E D A L B . 3 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 27 SHS81A CUT -OFF SA W — TROUBLESHOO TING (ENGINE) ) E N I G N E ( G N I T O O H S E L B U O R T . 4 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S o n t u b , e l b a l i a v a s i l e u f " , t r a t s o t t l u c i f f i D .
P A GE 28 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — TROUBLESHOO TING (ENGINE) ) D E U N I T N O C , E N I G N E ( G N I T O O H S E L B U O R T .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 29 HS81FK1A [ Includes 1 ea.] HS52010451R- Foam Filter HS018600125R- Paper Filter HS018600056AR - Inner Filter HS81FK5A [ Includes 5 ea.] HS52010451R - Foam Filter HS018600125R - Paper Filter HS018600056AR - Inner Filter HS81FK10A [ Includes 10 ea.
P A GE 30 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) The contents and part numbers listed in the parts section are subject to change without notice . Multiquip does not guarantee the availibility of the parts listed.
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 31 SHS81A CUT -OFF SA W — SUGGESTED SP ARE P ARTS SUGGESTED SP ARE P AR TS SHS81A SIDEWINDER CUT -OFF SA W 1 to 3 Units Qt y . P/ N Description 1 ............ HS52012047A .
P A GE 32 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — MUFFLER ASSY . MUFFLER ASSY ..
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 33 MUFFLER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * HS3801052 SCREW 3 2 * HS3033074 W ASHER 5 3 * HS09700.
P A GE 34 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — RECOIL ST ART ASSY . RECOIL ST AR T ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 35 RECOIL ST AR T ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 14 * HS50140060 HANDLE, ST AR TER ROPE 1 15 * HS09.
P A GE 36 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — CRANKCASE ASSY . CRANKCASE ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 37 CRANKCASE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 3 HS52010312 P LA T E 1 1 1 HS09990268 R UBBER CLAMP 1 1 2 HS52020040 C A P 1 1 6 HS097000009A GASKET , CRANKCASE 1 1 8 HS52012018 CRANKCASE W/ BEARING ASSY .
P A GE 38 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — V -BEL T CO VER (CLUTCH SIDE) ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 39 V -BEL T CO VER (CLUTCH SIDE) ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 40 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — V -BEL T CO VER (PULLEY) /BLADE GU ARD ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 41 V -BEL T CO VER (PULLEY -SIDE)/BLADE GUARD ASSY . NO . P AR T NO .
P A GE 42 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — FUEL T ANK ASSY . FUEL T ANK ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 43 SHS81A CUT -OFF SA W — FUEL T ANK ASSY . FUEL T ANK ASSY . NO . P AR T NO .
P A GE 44 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — LIFTING HANDLE AND ROLLER ASSY . LIFTING HANDLE AND R OLLER ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 45 LIFTING HANDLE AND R OLLER ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 46 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — THRO TTLE LINKA GE ASSY . THRO TTLE ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 47 THRO TTLE ASSY NO . P AR T NO . P AR T NAME QTY . REMARKS 1 0 HS52010092 TH RO TTLE TRIGGER LEVER .
P A GE 48 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — FL YWHEEL CO VER ASSY . FL YWHEEL CO VER ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 49 FL YWHEEL CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 3 HS005000361 W ASHER, FLA T 1 4 HS3833080 W ASHER, LOCK 1 5 HS004000142 N UT 1 6 HS097000019C FLANGE, ST ARTER 1 SHS81A CUT -OFF SA W — FL YWHEEL CO VER ASSY .
P A GE 50 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — FL YWHEEL ASSY . FL YWHEEL ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 51 FL YWHEEL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52010136R FL YWHEEL ................................................ 1 ......... INCLUDES ITEM W/ * 2 * HS52012027 P AWL S ET 1 SHS81A CUT -OFF SA W — FL YWHEEL ASSY .
P A GE 52 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — IGNITION COIL ASSY . IGNITION COIL ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 53 IGNITION COIL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 7 * HS094600169 SPRING SP ARK PLUG 1 8 * HS09460009.
P A GE 54 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — AIR FIL TER ASSY . AIR FIL TER ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 55 AIR FIL TER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52012024B FLANGE, PRE- FIL TER, CAP 1 2 HS330000010 O - RING, FLANGE PRE- FIL TER 2 3 HS018600125 F IL TER, AIR (ST ANDARD) 1 3A HS099900778A FI L TER, AIR (WET CUTTING) .
P A GE 56 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — CARB URET OR MOUNTING ASSY . CARBURET OR MOUNTINGASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 57 CARBURET OR MOUNTING ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 6 HS3833073 W ASHER 2 1 1 52010120 SPRING 1 .
P A GE 58 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — CARBURET OR ASSY . CARBURET OR ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 59 SHS81A CUT -OFF SA W — CARBURET OR ASSY . CARBURET OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * HS52010019 T H ROT TLE V AL VE 1 2 * HS380000338 SCREW 1 3 HS2318920B CARBURET OR ASSY .
P A GE 60 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — CRANKSHAFT / PIST ON ASSY . CRANKSHAFT AND PIST ON ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 61 CRANKSHAFT AND PIST ON ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS3055118 SP ARK PLUG 1 2 HS005100906A S.
P A GE 62 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — W A TER KIT ASSY . W A TER KIT ASSY .
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 63 SHS81A CUT -OFF SA W — W A TER KIT ASSY . W A TER KIT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52012062 W A TER KIT ASSY . ............................
P A GE 64 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) SHS81A CUT -OFF SA W — T OOLS T OOLS.
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 65 SHS81A CUT -OFF SA W — T OOLS T OOLS NO . P AR T NO . P AR T NAME QTY .
P A GE 66 — SHS81A CUT -OFF SA W — OPERA TION AND P ARTS MANU AL — REV . #0 (01/30/08) y m o n o c Ed r a d n a t Sm u i m e r Pe m e r p u S S P G 4 1L B S 4 11 S H D P 4 12 S H D P 4 1 S P G 4.
SHS81A CUT-OFF SAW — OPERATION AND PARTS MANUAL — REV. #0 (01/30/08) — PAGE 67.
OPERA TION & P AR TS MANUAL © COPYRIGHT 2008, MUL TIQUIP INC. Multiquip Inc, and the STOW logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.
An important point after buying a device Multiquip SHS81A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip SHS81A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip SHS81A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip SHS81A you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip SHS81A will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip SHS81A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip SHS81A.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip SHS81A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip SHS81A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
