Instruction/ maintenance manual of the product LS600P Multiquip
Go to page of 88
Opera tiOn Manual THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .
.
.
T ABLE OF CONTENTS LS600P Concr ete Pump Proposition 65 W arning .
P AR TS ORDERING PROCEDURES www .
SAFETY INFORMA TION Do not operate or service the equipment before reading the entire manual.
.
.
SAFETY INFORMA TION NO TICE run engine without an air fi lter or with a dir ty air fi lter .
.
.
Pump Specifications Model LS-600P Pumping Rate LS-600 Up to 60 cu.
.
.
.
.
GENERAL INFORMA TION Downhill Pumping Downhill pumping can be a difficult procedure on some jobs.
Fill the hopper with water after making sure that all sand and rock ha v e been remov ed from manifold.
.
Rever se Pumping Procedure 1 .
.
Figure 5.
Figure 5 and illustrates the location of the major components f or the LS600P Concrete Pump .
PUMP COMPONENTS (CONTINUED) Figure 6.
.
DIGIT AL CONTROL P ANEL COMPONENTS Figure 7 displa ys the components associated with the digital control panel.
.
The engine (Figure 8) must be chec ked f or proper lubrication and filled with fuel pr ior to operation.
1 .
Engine Oil Check 1 .
2 .
SETUP 1 .
OPERA TION Starting Procedure 1 .
Hose Lubrication Bef ore pumping, it is necessar y to lubricate the hose.
4 . Scroll through the digital readout screen with the scroll s witch to go to screen 7 (Figure 29).
10.
4 . Reinstall the control panel and tighten the 2 retaining screws .
.
MAINTENANCE * 1 Replace engine oil and filter at 100 hours , first time only .
.
.
1 .
MAINTENANCE 10. Be sure to coat the seal (Figure 46) of the new oil filter with clean engine oil.
Fuel Filter Replace the secondar y fuel filter (Figure 48) e v ery 800 hours.
.
.
Figure 53.
Accumulator Cir cuit The accumulator circuit has two functions in the h ydraulic system.
MAINTENANCE Figure 56.
7 . Remov e the three 3/8 – 16 x 3” bolts from the piston.
Heat Exchanger Cooling Fan This section is intended to make sure the cooling f an is working properly .
.
TRAILER MAINTENANCE P er iodically check the actuator mounting f asteners for damage or loosening.
.
.
.
.
Figure B.
.
or is worn, the trailer can come loose from the tow v ehicle and ma y cause death or serious injur y .
If the coupler cannot be secured to the hitch ball, do not tow the trailer .
.
the ball andcoupler system.
.
.
.
.
T able B belo w will help pinpoint the causes and solutions of tire wear prob lems.
.
.
.
SLUMP TEST PROCEDURE 1 .
.
.
.
.
.
.
.
.
12VDC CHASSIS GND.
.
.
.
.
.
.
Opera tiOn Manual Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING United St a teS Multiquip Corporate Office MQ P arts Depar tment 18910 Wilmington A v e. Carson, CA 90746 Contact: mq@multiquip .
An important point after buying a device Multiquip LS600P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip LS600P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip LS600P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip LS600P you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip LS600P will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip LS600P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip LS600P.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip LS600P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip LS600P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
