Instruction/ maintenance manual of the product HHXG5 Multiquip
Go to page of 52
OPERA TION MANUAL THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .
P A GE 2 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) PROPOSITION 65 W ARNING Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica.
P A GE 4 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) T ABLE OF CONTENTS HHXG5 Ride-On T r owel Proposition 65 W ar ning ........................................... 2 Silicosis/Respirator y W arnings ......................
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 5 NOTES.
P A GE 6 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) TRAINING CHECKLIST TRAINING CHECKLIST This checklist will lists some of the minimum requirements f or machine maintenance and operation. Please feel free to detach it and make copies.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 7 DAIL Y PRE-OPERA TION CHECKLIST Daily Pre-Operation Chec klist 1 Engine oil le v el 2 Hydraul.
P A GE 8 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) SAFETY INFORMA TION Do not operate or ser vice the equipment before reading the entire manual. Saf ety precautions should be follo wed at all times when oper ating this equipment.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 9 SAFETY INFORMA TION GENERAL SAFETY CA UTION NEV ER oper at e this equip me nt wit ho ut pro pe r prot ec ti v e c.
P A GE 10 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) SAFETY INFORMA TION TR O WEL SAFETY D ANGER Engine fuel exhaust gases contain poisonous carbon mono xide . This gas is colorless and odorless, and can cause death if inhaled.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 11 SAFETY INFORMA TION NO TICE NEVER r un engine without an air fi lter or with a dir ty air fi lter . Sev ere engine damage ma y occur . Ser vice air fi l ter frequently to pre v ent engine malfunction.
P A GE 12 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) TRANSPOR TING SAFETY CA UTION NEVER allow any person or animal to stand underneath the equipment while lifting. Ride-on trowels are very heavy and awkw ard to mov e around.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 13 T railer should be adjusted to a le vel position at all times when towing. Raise and lock trailer wheel stand in up position when towing. Pla ce choc k bloc ks under neath wheel to pre v ent rolling while parked.
P A GE 14 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) DIMENSIONS/SPECIFICA TIONS (TROWEL) Figure 1. HHX Dimensions T able 1. HHX Specifications SPECIFICA TION P ARAMETER HHXG5 (V ANGU ARD) A–Length – in. (cm) 98.00 (249) B–Width – in.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 15 SPECIFICA TIONS (ENGINE) T able 2. HHXG5 Engine Specifications Model V anguard DM950G T ype Gasoline Cylinders 3 Displacement 58.1 cu.in. (952 cc) P ower (Maximum Output) 31 HP (23.
P A GE 16 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) GENERAL INFORMA TION HHX RIDE-ON TRO WEL F AMILARIZA TION The HHX is designed f or the floating and finishing of concrete slabs.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 17 CONTROLS AND INDICA TORS Figure 2. HHXG5 Controls and Indicators (Fr ont) 9 9 8 5 7 6 2 4 4 3 14 15 16 1 13 12 1 1 35 35 10 1. Seat — Place for operator to sit. Engine will not star t unless operator is seated.
P A GE 18 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) CONTROLS AND INDICA TORS Figure 3. HHXG5 Controls and Indicators (Rear) 17 18 19 19 35 35 29 21 22 28 24 30 23 20 25 26 27 17. Rear Guard — Remov e to access r ight side of engine and inter nal components f or ser vice and maintenance.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 19 CONTROLS AND INDICA TORS 3 8 . B a t t e ry — P r o v i d e s + 1 2 V D C p o w e r t o t h e e l e c t r i c a l system 39. Right Side Clamshell — Remov e two bolts to open f or ser vice and maintenance access.
P A GE 20 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) ENGINE COMPONENTS (GASOLINE) Figure 5. Engine Components (Gasoline Engine) The f ollo wing refer to the basic engine components for ref erence (Figure 5). Refer to the manuf acturer's engine manual for instructions and details of operation and ser vicing.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 21 SETUP TR O WEL SETUP INSTR UCTIONS The purpos e of thi s sect io n is to assi st the user in the sett in g up of a NEW trow el. If your trowel is already assembled (seats, handles, knobs and batter y , then this section can be skipped.
P A GE 22 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) INSPECTION This section is intended to assist the operator with the initial star t-up of the HHX. It is extremely impor tant that this section be read carefully bef ore attempting to use the trow el in the field.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 23 OPERA TION ST AR TING THE ENGINE 1. Place one foot on the trowel's platf orm, grab ahold of any par t of the frame (NO T THE JO YSTICKS), lift y ourself onto the trowel, then sit down in the operator's seat.
P A GE 24 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) 9. Repeat this section a fe w times to get fully acquainted with the engine star ting procedure. 10. Let the engine idle f or 3-5 minutes . If choke is applied, push the choke to the open position as soon as the engine will run smoothly .
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 25 OPERA TION Blade Pitch Sometimes it ma y be necessar y to match blade pitch between the two sets of blades .
P A GE 26 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) MAINTENANCE MAINTENANCE When perf orming any maintenance on the trowel or engine, f ollow all saf ety messages and r ules f or safe operation stated at the beginning of this manual.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 27 MAINTENANCE Air Cleaner (Daily) Th e Briggs an d Str at to n V ang ua rd eng in e is eq ui pp ed wit h a repla ceab le, high-den sity paper air clean er eleme nt. Chec k the air cleaner daily or before star ting the engine.
P A GE 28 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) MAINTENANCE Oil/W ater Separator Dr ai n wa ter fro m the bott om of the fuel filt er by loo se ni ng the drain plug and allowing the water to drain out. Ref er to your engine manual f or specific details to perf or m this operatio n.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 29 MAINTENANCE (OLD STYLE CLUTCH) Chec king The Drive Belt The dr ive belt needs to be changed as soon as it begins to show signs of wear . DO NO T reuse a belt under any circumstances.
P A GE 30 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) Figure 18. Expanding Lower Drive Pulley 3. A wooden block inser ted between the mov eab le face and the fix ed face of the lower dr iv e pulley ma y help keep the low er drive pulley f aces open while installing the new driv e belt.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 31 Spare Drive Belt Replacement T o replace a spare dr ive belt, be prepared to disconnect the CV -joint from the left-side gearbox. See Figure 21. 1. Place the trowel on suitab le suppor ts and obser v e all saf ety precautions .
P A GE 32 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) Figure 24. Pulley Interaction The "V ar iable Pitch Pulle ys" hav e one fix ed face , and one mo v eab le fac e. The driv e pulle y mov eab le f ace is contro lled by roller weight ar ms and springs, which change position according to engine speed.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 33 Clutch This clutch system provides a high pulley ratio (a low gear- so to speak) to star t out and a low pulley ratio ( a high gear- so to speak) for a high speed operation, with infinite v ariation between the two .
P A GE 34 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) MAINTENANCE (NEW STYLE CLUTCH) CHECKING THE DRIVE BEL T The dr ive belt needs to be changed as soon as it begins to show signs of wear . DO NO T reuse a belt under any circumstances.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 35 MAINTENANCE (NEW STYLE CLUTCH) 2. Di sc on ne ct th e le ft -s id e C V Ax le f r o m t h e le ft -s id e g e a rb o x an d t h e lo we r d ri v e pul le y c o u p l e r .
P A GE 36 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) H O W I T W O R K S Th e Mul ti - C lu tc h fu nc t i on s mu c h li k e a st a n d a r d CV T sy st e m.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 37 MAINTENANCE (TROWEL) Blade Pitch Matching Blade Pitch f or Both Sets of Blades Sometimes it ma y be necessar y to match blade pitch between the two sets of blades . There are some signs that this may be necessar y .
P A GE 38 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) MAINTENANCE (TROWEL) Look at the machine while it is running, do the guard rings “roc k up and down” relative to the ground? Do the pitch control to wers roc k back and f or th? Figure 34.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 39 MAINTENANCE T ro wel Arm Adjustment Use the f ollo wing procedure to check and adjust trowel ar ms, and chec k f or worn or damaged components when it becomes apparent that the trow el is finishing poorly or in need of routine maintenance.
P A GE 40 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) MAINTENANCE 2. Lo os e n th e j a m n u t an d c o n e po in t sq ua re he ad se t sc re w . 3. Carefully lift the upper trow el assemb ly off of the spider assembly .
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 41 MAINTENANCE Chec king T ro wel Arm Straightness T row el ar ms can be damaged by rough handling, (such as dropping the tro wel on the pad), or b y striking e xposed plumbing, f orms, or rebar while in oper ation.
P A GE 42 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) MAINTENANCE 3. Unscrew the locking bolts on the adjustment tool and place the trow el ar m into the fixture channel as shown in Figure 46 A thin shim ma y be required to cov er the blade holes on the tro wel arm.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 43 MAINTENANCE Ref er to Figur e 47 when insta lli ng pans onto finish er bl ade s . Figure 47. Z-Clip Finisher Pan Installation 1. Lift trow el just enough to slide pan under blade s .
P A GE 44 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) MAINTENANCE Figure 48. Steering Pressure Check The left steer ing valv e's f actory setting is 230 PSI, howe ve.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 45 DECOMMISSIONING TROWEL Decommissioning T ro wel/Components Decommissioning is a controlled process used to saf ely retire a piece of equipment that is no longer ser viceable.
P A GE 46 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) WIRING DIAGRAM (ENGINE) NC RIGHT -SIDE RET ARDANT SPRA Y SWITCH WHT RED RIGHT FRONT LIGHT BLK BLK CONNECT T O CHASSI.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 47 WIRING DIAGRAM (ENGINE) NC RIGHT -SIDE RET ARDANT SPRA Y SWITCH WHT RED RIGHT FRONT LIGHT BLK BLK CONNECT T O CHASSI.
P A GE 48 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) TROUBLESHOOTING T roubleshooting (Ride-On T ro wel) Symptom P ossible Pr oblem Solution Engine running rough or not at all. Stop s witch malfunction? Make sure that the stop s witch is functioning when the operator is seated.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 49 TROUBLESHOOTING T roubleshooting (Ride-On T ro wel) - continued Symptom P ossible Problem Solution Lights (optional) not working. Wiring? Check all electrical connections in the lighting circuit.
P A GE 50 — HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) TROUBLESHOOTING T roubleshooting (Engine) Symptom P ossible Pr oblem Solution Diffi cult to star t, fuel is av ailable , b ut no spark at spark plug. Spark plug br idging? Check gap , insulation or replace spark plug.
HHXG5 RIDE-ON TR O WEL • OPERA TION MANU AL — REV . #1 (10/25/10) — P A GE 51 TROUBLESHOOTING T roubleshooting (Engine) - contin ued Symptom P ossible Pr oblem Solution W eak in pow er , compression is proper and does not misfi re. Air cleaner dir ty? Clean or replace air cleaner .
OPERA TION MANUAL PN: 23110 Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2010, MUL TIQUIP INC . Multiquip Inc, the MQ logo and the Whiteman logo are registered trademarks of Multiquip Inc.
An important point after buying a device Multiquip HHXG5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip HHXG5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip HHXG5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip HHXG5 you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip HHXG5 will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip HHXG5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip HHXG5.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip HHXG5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip HHXG5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
