Instruction/ maintenance manual of the product GB3LED Multiquip
Go to page of 38
OPERA TION AND P AR TS MANUAL THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest re vision of this publication, visit our website at: www .
P A GE 2 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) T ABLE OF CONTENTS GB3LED LIGHTING SYSTEM T able Of Contents .................................................... 2 P ar ts Ordering Procedures ..............
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 3 P AR TS ORDERING PROCEDURES www .multiquip .com Or dering par ts has never been easier! Choose fr om three.
P A GE 4 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) SAFETY INFORMA TION Do not operate or service the equipment before reading the entire manual. Saf ety precautions should be follo wed at all times when operating this equipment.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 5 SAFETY INFORMA TION GENERAL SAFETY CA UTION NEVER operate this equipment without proper protectiv e cl.
P A GE 6 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) SAFETY INFORMA TION LIGHTING SYSTEM SAFETY W ARNING NEVER disconnect any emer gency or safety devices. These de vices are intended f or operator saf ety .
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 7 SAFETY INFORMA TION B ALLOON SAFETY W ARNING T o pre vent serious burns, NEVER touch or unzip the balloon env elope when the lamp is on. CA UTION AL W A YS keep the balloon a wa y from shar p objects and e xcessive amounts of heat.
P A GE 8 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) SPECIFICA TIONS T able 1. Specifications Globug Lighting System Model GB3LED Input V oltage 100 V A C F requency 50 Hz/ 60 Hz Max. Current 3.3 Amps (100 V @300 W) W eight Lamp Fixture 18.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 9 DIMENSIONS T able 2. Dimensions Reference Letter Dimension in. (mm.) Reference Letter Dimension in. (mm.) A Upper P osition - 44.7 in. (1,135 mm.) Lower P osition - 52.
P A GE 10 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) ILLUMINA TION RANGE Figure 2. Illumination Rang e (Foot Candles) tripod 1st Stage T wo stage mast tripod 2nd Stage T wo stage mast 20ft 20ft 2.5 1 10 20 5 0.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 11 GENERAL INFORMA TION The Multiquip GloBug GB3LED is a general purpose, por table , glare-free lighting systems T ypical applications f or these types of lighting systems include construction sites, emergency road crews and bac kyard parties.
P A GE 12 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) COMPONENTS Figure 4. Major Components 10 2 4 5 6 1 7 8 9 3 COVER CARRYING CASE.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 13 COMPONENTS Figure 4 shows the location of the components f or the GloBug lighting system. The function of each component is described below: 1 . A C P ower Cable — Connect this cab le to a 120 V AC , 60 Hz power source .
P A GE 14 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) SETUP TRIPOD DEPLO YMENT 1 . Place the tr ipod on a firm lev el surf ace so that it will not slide or tur n ov er . Make sure there is enough space around the unit f or the tripod legs to be deploy ed.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 15 SETUP B ALLOON ASSEMBL Y PLA CEMENT 1 . Place balloon assembly (Figure 8) onto mast and tighten Upper T -handle. Figure 8. Light Asembly Placement 2 . Unsnap the three buttons on the bottom of the balloon.
P A GE 16 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) RAISING THE MAST Bef ore raising the mast, make sure the upper T -handle bolt lock (Figure 12) is securely tightened. This will pre vent the balloon/lamp assembly from f alling off.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 17 OPERA TION APPL YING PO WER 1 . Connect the AC po wer cable to the 120 V AC receptacle on the generator used. See Figure 13. Figure 13. Connecting to Po wer Sour ce 2 .
P A GE 18 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) ST ORA GE 1 . Loosen the lower T -handle by tur ning handle counterclockwise (Figure 16). Push down on mast until mast is fully inser ted into mast housing. Tighten T -handle fully .
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 19 7 . T o retract tripod legs (Figure 20) and place in the stow position, lift up on mast while pulling up on the velcro str ap . Continue pulling upward on the mast until the tripod legs are fully retracted and are in the stow position.
P A GE 20 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) MAINTENANCE REPLA CING THE LAMP REPLA CING BALLOON ENVELOPE 1 . Unzip the zipper (Figure 38) at the top and bottom of the balloon env elope (cover). Figure 23.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 21 MAINTENANCE FIL TER REPLACEMENT 1 . Remov e the balloon as described in the STORA GE section. 2 . T ur n the balloon/lamp assemb ly upsidedown to access the filter .
P A GE 22 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) MAINTENANCE B2 E1 B1 T2 T4 T3 L1 L2 E2 B3 B4 Figure 30. Maintenance Check P oints.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 23 MAINTENANCE F or a prolonged life cycle an e xtended quality follo w the recommended GloBug lighting system ser vice guidelines as ref erenced in Figure 30 and T able 3.
P A GE 24 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) WIRING DIAGRAM Indicator Lamp Dimmer Switch Figure 31. Electrical Wiring Diagram.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 25 TROUBLESHOOTING T roubleshooting Symptom P ossible Pr oblem Solution Lamp does not light. Is plug connected? Plug in correctly . Is generator’ s main switch turned off? T ur n on s witch.
P A GE 26 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) EXPLANA TION OF CODE IN REMARKS COLUMN The f ollowing section e xplains the different symbols and remarks used in the P ar ts section of this manual. Use the help numbers f ound on the back page of the manual if there are any questions .
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 27 SUGGESTED SP ARE P AR TS GLOBUG LIGHTING SYSTEM 1 T O 3 UNITS Qty . P/N Description 3............A300260400 ......... LED HEA TSINK ASSY 2............A100015901 .
P A GE 28 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) NAMEPLA TE AND DECALS 2 1 10 8 9 6 7 5 3 4.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 29 NAMEPLA TE AND DECALS N O. P ART NO . P ART NAME QTY . REMARKS 1 A400204801 DECAL; ELECTRIC SHOCK, HIGH V OL T AGE, BURN HAZ.
P A GE 30 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) ELECTRICAL ASSY ..
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 31 ELECTRICAL ASSY . N O. P ART NO . P ART NAME QTY . REMARKS 1 A300260400 LED HEA TSINK ASSY 6 2 A100015901.
P A GE 32 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) TRIPOD ASSY ..
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 33 TRIPOD ASSY . N O. P ART NO . P ART NAME QTY . REMARKS 1 A300131500 TRIPOD CASE 1 2 A300171601 PIPE (BASE.
P A GE 34 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) MAST ASSY ..
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 35 MAST ASSY . N O. P ART NO . P ART NAME QTY . REMARKS 1 A300200300 FIRST MAST ( φ 45*1050) ASSY 1 2 A300200600 SECOND MAST (φ 38*1200) ASSY 1 3 A400187601 KNOB 1 4 A400229900 BO TT OM PLA TE ( φ 33.
P A GE 36 —GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) TERMS AND CONDITIONS OF SALE — P AR TS P A YMENT TERMS T er ms of payment for par ts are net 30 days. FREIGHT POLIC Y All par ts order s will be shipp ed colle ct or prepaid wi th the charg es added to t he invoice.
GB3LED LIGHTING SYSTEM • OPERA TION AND P ARTS MANU AL — REV . #0 (03/18/14) — P A GE 37 NOTES.
OPERA TION AND P AR TS MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2014, MUL TIQUIP INC. Multiquip Inc , the MQ logo are registered trademarks of Multiquip Inc. and ma y not be used, reproduced, or altered without written permission.
An important point after buying a device Multiquip GB3LED (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip GB3LED yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip GB3LED - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip GB3LED you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip GB3LED will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip GB3LED, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip GB3LED.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip GB3LED. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip GB3LED along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
