Instruction/ maintenance manual of the product DCA-400SSK Multiquip
Go to page of 114
MQ POWER DCA-400SSK DCA-400SSK2 WHISPER W A TT TM GENERA TOR (ST ANDARD) P AR TS AND OPERA TION MANUAL Re vision #3 (09/17/01) MUL TIQUIP INC. P ARTS DEP ARTMENT : 18910 WILMINGTON AVE.
P A GE 2 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01).
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P P P P P AR AR AR AR AR TS D.
P A GE 4 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01) Here's How T o Get Help ............................................. 3 T ab le Of Contents ...................................................... 4 Rules For Safe Operation .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 5 P AR TS ORDERING PROCEDURES Get special freight allowances when you order 10 or more line items via F AX!** ■ UPS Gro.
P A GE 6 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01) R ULES FOR SAFE OPERA TION ■ NEVER touch the hot exhaust manif old, muffler or cylinder . Allow these par ts to cool before ser vicing engine or generator . ■ The engine of this generator requires an adequate free flo w of cooling air .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 7 R ULES FOR SAFE OPERA TION CAUTION : ■ Backfeed to a utility system can cause electrocution and/ or property damage. Do not connect to any building's electrical system except through an approved device or after building main switch is opened.
P A GE 8 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01) R ULES FOR SAFE OPERA TION ■ NEVER Run engine without air filter . Se vere engine damage ma y occur . ■ Always service air cleaner frequently to prevent carburetor malfunction.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 9 T ransporting ■ Alw ays shutdo wn engine before tr anspor ting. ■ Tighten fuel tank cap securely . ■ Drain fuel when transpor ting generator o ver long distances or deteriorated roads.
P A GE 10 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01) T o reduce the possibility of an accident while transpor ting the generator on public roads, always make sure the trailer (Figure 1) that suppor ts the generator and the to wing v ehicle are in good operating condition and both units are mechanically sound.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 11 Explanation of Chart: This section is intended to provide the user with trailer ser- vice and maintenance inf or mation. The ser vice and mainte- nance guidelines referenced in this section apply a wide range of trailers.
P A GE 12 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01) s n o i t a c i f i c e p S . 1 e l b a T L E D O M N O I T A C I L P P A L L E C L E U F M E T S Y S E K A R B .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 13 ) t ' n o C ( s n o i t a c i f i c e p S . 1 e l b a T L E D O M R E L P U O C S E R I T S L E E H W E L X A S B U H N O I S N E P S U S L A C I R T C E L E W 0 1 - R L R T S S A L C L L A B " 2 E L B A T S U J D A 2 C 3 1 - 5 7 1" 0 5 .
P A GE 14 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01) DCA-400SSK — TRAILER SAFETY GUIDELINES Brakes If your trailer has a braking system, the brakes should be inspected the first 200 miles of operation. This will allow the brak e shoes and dr ums to seat properly .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 15 DCA-400SSK — TRAILER SAFETY GUIDELINES Hydraulic/Air/Surge Brakes Hydraulic brakes (Figure 3) should not require any special attention with the exception of routine maintenance such as shoe and lining replacement.
P A GE 16 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01) Tires/Wheels/Lug Nuts Tires and wheels are a v er y impor tant and critical components of the trailer . When specifying or replacing the trailer wheels it is impor tant the wheels, tires , and axle are properly matched.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 17 s t n e m e r i u q e R e u q r o T n o i s n e p s u S . 3 e l b a T m e t I ) .
P A GE 18 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD)— REV . #3 (09/17/01) NO TE: LIGHTS ARE ORIENTED FR O M THE DRIVER’S SEA T DCA-400SSK — TRAILER-WIRING DIA GRAM.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (09/17/01) — PAGE 19 g n i t o o h s e l b u o r T e k a r B c i r t c e l E . 5 e l b a T m o t p m y S e s u a C e l b i s s o P n o i t u l o S t n e t t i m r e t n I r o s e k a r B o N s e k a r B ? s e r i w n e k o r b r o s t i u c r i c n e p o y n A.
P A GE 20 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) g n i t o o h s e l b u o r T e k a r B c i l u a r d y H . 6 e l b a T m o t p m y S e s u a C e l b i s s o P n o i t u l o S s e k a r B o N? d e k n i k r o n e k o r b e n i l e k a r B.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 21 Machine Safety Decals The DCA-400SSK gener ator is equipped with a number of saf ety decals. These decals are pro vided for operator saf ety and maintenance inf or mation.
P A GE 22 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — OPERA TION AND SAFETY DECALS.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 23 DCA-400SSK — SPECIFICA TIONS s n o i t a c i f i c e p S . 7 e l b a T s n o i t a c i f i c e p S r o t a r e n e .
P A GE 24 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — GENERAL INFORMA TION DCA-400SSK F AMILIARIZA TION Generator The MQ P ow er Model DCA-400SSK is a.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 25 DCA-400SSK — GENERAL INFORMA TION Jac ket W ater Heater (OPTIONAL) The jacket water heater is a 1500-watt heater designed to k eep the coolant war m in the engine b lock f or f ast star ts and load acceptance .
P A GE 26 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — MAJOR COMPONENTS Figure 6. Major Components.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 27 NO TE P A GE.
P A GE 28 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — DIMENSIONS (T OP AND SIDE) Figure 7a. Dimensions Dry weight: 4270kg (9413.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 29 DCA-400SSK — DIMENSIONS (FRONT AND REAR) Figure 7b. Dimensions.
P A GE 30 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — CONTR OL P ANEL Figure 8. Control Panel.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 31 DCA-400SSK — CONTR OL P ANEL The definitions below describe the controls and functions of the DCA-400SSK " Control Panel Control Panel Control Panel Control Panel Control Panel " (Figure 8).
P A GE 32 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — ENGINE OPERA TING P ANEL Figure 10. Engine Operating Panel.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 33 The definitions below describe the controls and functions of the DCA-400SSK " Engine Operating Panel Engine Operating Panel Engine Operating Panel Engine Operating Panel Engine Operating Panel "(Figure 10).
P A GE 34 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — OUTPUT TERMINAL P ANEL O VER VIEW Circuit Breakers T o protect the generator from an o verload, a 3-pole , 1000 amp, main main main main main circuit breaker is provided to protect the UVW output terminals from overload.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 35 DCA-400SSK — OUTPUT TERMINAL P ANEL O VER VIEW Legs O and Ground are considered Bonded Grounds.
P A GE 36 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) E L B A L I A V A S E G A T L O V . 8 E L B A T L E D O MK S S 0 0 4 A C D E G A T L O V E S A H P 3 ) E L B A .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 37 How to read the output terminal gauges. The gauges and knobs on the control panel DO NO T effect the generator output in an y fashion. They are there to simply help the operator observe how much power is being supplied produced at the UVWO legs.
P A GE 38 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) 3 Phase, 240 V olt The following connection, with the voltage change-over board set into the 240V set position (See Figure 19), can off er THREE PHASE pow er at 240V .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 39 480 V olt Set position The voltage change-over board 480V set position uses all 6 plates in 3 diff erent connection places. There are 2 plates at every position (Every plate is used).
P A GE 40 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) CAUTION : An electric shock may happen when vibrators are used. P ay close attention to handling when operating vibrators and always use rubber boots and gloves to insulate the body from electrical shock.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 41 Figure 27. T ypical Generator Grounding Application DCA-400SSK — INST ALLA TION.
P A GE 42 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) General Inspection Prior to Operation The DCA-400SSK generator has been thoroughly inspected and accepted pr ior to shipment from the f actor y .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 43 Lubrication Oil Fill the engine crankcase with lubricating oil through the filler hole, but do not overfill.
P A GE 44 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — PRE-SETUP Day-to-day addition of coolant is done from the reserve tank. When adding coolant to the radiator , DO NO T remo v e the radiator cap until the unit has completely cooled.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 45 DCA-400SSK — PRE-SETUP Battery Cable Installation AL W A YS be sure the batter y cab les (Figure 30) are proper ly connected to the batter y ter minals as shown belo w .
P A GE 46 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — LO AD APPLICA TION Single Phase Load Always be sure to check the nameplate on the generator and equipment to insure the wattage, amperage and frequency requirements are satisfactorily supplied by the generator for operating the equipment.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 47 WARNING: Before Starting Engine 1. Check the lubricating oil lev el pr ior to star ting the engine. Mak e sure the generator is le v el. The oil lev el must be maintained between two notches on the dipstick.
P A GE 48 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) 4. Close all engine enclosure doors (Figure 34). Figure 34. Engine Enclosure Doors 5. Set the battery ON/OFF switch (Figure 35) to the ON position. Figure 35. Battery ON/OFF Switch 2.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 49 8. The generator's frequency meter (Figure 39) displays the 60 cycle output frequency in HERTZ . Figure 39. Frequency Meter (Hz) Figure 40. V oltage Meter (V olts) 9.
P A GE 50 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) 16. Observe the generator's ammeter (Figure 48) and verify that it reads the anticipated amount of current with respect to the load. Remember the ammeter will only display a current reading if the load is in use.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 51 DCA-400SSK — GENERA T OR ST ART -UP PR OCEDURE (CONTR OLLER) 1. Follow instructions as with key switch numbers 1-6.
P A GE 52 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) Figure 53. Engine Controller Running Status LED (OFF) NEVER stop the engine suddenly except in an emergency . DO NO T use the emergency stop switch a as method of shutting do wn the engine.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 53 NO TE P A GE.
P A GE 54 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — MAINTENANCE General Inspection Prior to each use, the generating set should be cleaned and inspected for deficiencies. Check for loose, missing or damaged nuts, bolts or other fasteners.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 55 DCA-400SSK — MAINTENANCE 5. When the water level is near the mouth of the water filler , open drain plugs and star t the engine, and run at lo w idling. K eep the engine r unning at lo w idling and flush the radiator for about 10 minutes.
P A GE 56 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) Generator Storage For storage of the generator for over 30 days, the following is required: z Fill the fuel tank completely , lubr icate and change oil.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 57 . 5 1 E L B A T E C N A N E T N I A M / N O I T C E P S N I s r H 0 1 Y L I A D s r H 0 5 2 s r H 0 0 5 s r H 0 0 0 1.
P A GE 58 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — GENERA T OR WIRING DIA GRAM.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 59 NO TE P A GE.
P A GE 60 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — ENGINE WIRING DIA GRAM (KEY SWITCH).
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 61 DCA-400SSK — ENGINE WIRING DIA GRAM (CONTR OLLER).
P A GE 62 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — TR OUBLESHOO TING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, use the tables shown for diagnosis based on the Engine T roubleshooting (T ab le 16).
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 63 DCA-400SSK — TR OUBLESHOO TING (ENGINE) ) D E U N I T N O C ( G N I T O O H S E L B U O R T E N I G N E . 6 1 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S .
P A GE 64 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — TR OUBLESHOO TING (GENERA T OR/ENGINE) Practically all breakdowns can be prevented by proper han.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 65 G N I T O O H S E L B U O R T R E L L O R T N O C E N I G N E . 8 1 E L B A T n o t p m y Se s u a C e l b i s s o Pn o i t u l o S s i t h g i l e r u s s e r p l i o w o L .
P A GE 66 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) How to read the marks and remarks used in this parts book. Items Found In the “ Remarks ” Column Serial Numbers- Where indicated, this indicates a serial number range (inclusiv e) where a par ticular par t is used.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 67 DCA-400SSK DCA-400SSK DCA-400SSK DCA-400SSK DCA-400SSK W/K W/K W/K W/K W/K OMA OMA OMA OMA OMA TSU SA6D140E-2 TSU SA6.
P A GE 68 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK GENERA T OR ASSY . GENERA T OR ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 69 GENERA T OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 C3110100202 RO TOR ASSY . 1 2 FIELD ASSY . 1 3 0601842401 R E SI S TOR 8 0 W 2 4 0601823282 RECTIFIER ..
P A GE 70 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK GENERA T OR ASSY . GENERA T OR ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 71 GENERA T OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 3 4 0017112045 HEX. HEAD BOL T 8 3 5 C3154300104 C O VER, BEARING 1 3 5 C3154300004 GASKET , BEARING 1 3 7 0010106060 HEX.
P A GE 72 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK CONTR OL BO X ASSY . CONTR OL BO X ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 73 DCA-400SSK CONTR OL BO X ASSY . CONTR OL BO X ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C3214000912 CONTROL BO X ............................................. 1 .
P A GE 74 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) CONTR OL BO X ASSY . DCA-400SSK CONTR OL BO X ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 75 DCA-400SSK CONTR OL BO X ASSY . CONTR OL BO X ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 45 0601840073 RHEOST A T (V OL T . REGULA T OR) ............... 1 ..........
P A GE 76 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 77 DCA-400SSK ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 C3924200054 ENGINE ...............................
P A GE 78 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK ENGINE & RADIA T OR ASSY . ENGINE & RADIA T OR ASSY .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 79 ENGINE & RADIA T OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 4 3 8212044103 OIL P ANEL 1 4 4 0017110025 HEX. HEAD BOL T 2 4 5 C3358300204 CLAMPER ROD 1 4 6 0017110025 HEX.
P A GE 80 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSKENGINE OPERA TING P ANEL ASSY . ENGINE OPERA TING P ANEL ASSY .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 81 DCA-400SSK ENGINE OPERA TING P ANEL ASSY . ENGINE OPERA TING P ANEL ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 C3353100003 OPERA TING P ANEL ......................
P A GE 82 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — OUTPUT TERMINAL ASSY . OUTPUT TERMINAL ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 83 OUTPUT TERMINAL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 8221860203 SET BOARD , OUTPUT TERMINAL 1 2 0801030404 OUTPUT TERMINAL 8 3 0801830904 HEX. HEAD BOL T 8 4 0039320000 HEX.
P A GE 84 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — B A TTER Y ASSY . BA TTER Y ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 85 BA TTER Y ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 0168719052 B A TTER Y 2 2 0805018904 B A TTER Y SHEET 2.
P A GE 86 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — A CTU A T OR ASSY . A CTU A T OR ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 87 A CTU A T OR ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 D YNC11020300024 A CTU A T O R ........................................... 1 ...... S/N3701677~;REPLACES 0602150092 2 0602211090 LEVER .
P A GE 88 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — MUFFLER ASSY . MUFFLER ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 89 DCA-400SSK — MUFFLER ASSY . MUFFLER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 C3331100102 MUFFLER 1 2 0019210020 HEX. HEAD BOL T 4 3 C3334200204 P A CKING 2 4 C3334200504 P A CKING 1 5 C3334200604 P A CKING 1 6 0019210025 HEX.
P A GE 90 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — FUEL T ANK ASSY . FUEL T ANK ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 91 DCA-400SSK — FUEL T ANK ASSY . FUEL T ANK ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 C3364000603 FUEL T ANK 1 2 0605505030 C AP , FUEL T ANK ................
P A GE 92 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — ENCLOSURE #1 ASSY . ENCLOSURE #1 ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 93 ENCLOSURE #1 ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 C3414000202 BASE ............................................................. 1 .......... S/N3692434 T O 3701676 C3414001902 BASE .
P A GE 94 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — ENCLOSURE #1 ASSY . ENCLOSURE #1 ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 95 ENCLOSURE #1 ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS DCA-400SSK — ENCLOSURE #1 ASSY . 1 7 0845042703 FILLER BRACKET 1 1 8 0019208020 HEX. HEAD BOL T 4 1 9 C3424201503 C O VER, FRONT FRAME 1 2 0 0019208020 HEX.
P A GE 96 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) ENCLOSURE #2 ASSY . DCA-400SSK — ENCLOSURE #2 ASSY . THE DEF A UL T P AR T NUMBER FOR THE COLOR ORANGE. PLEASE INDICA TE COLOR WHEN ORDERING: MQW-WHITE MQGRN-GREEN THE SERIAL NUMBER MA Y BE REQUIRED .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 97 ENCLOSURE #2 ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 C3444000903 REAR FRAME 1 2 8195151204 LOUVER P ANEL 1 3 C3454700104 LOUVER P ANEL 2 4 8175151204 LOUVER P ANEL 1 5 0207006000 HEX.
P A GE 98 — DCA-400SSK — P ARTS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — ENCLOSURE #2 ASSY . ENCLOSURE #2 ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 99 DCA-400SSK — ENCLOSURE #2 ASSY . ENCLOSURE #2 ASSY . NO . P AR T NO .
P A GE 100 — DCA-400SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — ENCLOSURE #3 ASSY . ENCLOSURE #3 ASSY . THE DEF A UL T P AR T NUMBER FOR THE COLOR ORANGE. PLEASE INDICA TE COLOR WHEN ORDERING: MQW-WHITE MQGRN-GREEN THE SERIAL NUMBER MA Y BE REQUIRED .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 101 ENCLOSURE #3 ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 C3454201022 SPLASHER P ANEL ....................................... 1 ........... S/N3692434 T O S/N3696509 C3454201032 SPLASHER P ANEL .
P A GE 102 — DCA-400SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — ENCLOSURE #3 ASSY . ENCLOSURE #3 ASSY . THE DEF A UL T P AR T NUMBER FOR THE COLOR ORANGE. PLEASE INDICA TE COLOR WHEN ORDERING: MQW-WHITE MQGRN-GREEN THE SERIAL NUMBER MA Y BE REQUIRED .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 103 ENCLOSURE #3 ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS DCA-400SSK — ENCLOSURE #3 ASSY . 2 4 0845046904 HINGE 1 1 0845045004 W ASHER 1 1 2 5 0845047004 HINGE 1 1 0845045004 W ASHER 1 1 2 6 0019208020 HEX.
P A GE 104 — DCA-400SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — R UBBER SEAL ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 105 R UBBER SEAL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 0228901390 R UBBER SEAL 6 2 0228900825 R UBBER SEAL 8 3 0228900790 R UBBER SEAL 2 4 0229201400 R UBBER SEAL 2 5 0228800795 R UBBER SEAL .
P A GE 106 — DCA-400SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — OIL PIPING ASSY . OIL PIPING ASSY ..
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 107 DCA-400SSK — OIL PIPING ASSY . OIL PIPING ASSY . NO . P AR T NO .
P A GE 108 — DCA-400SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — NAME PLA TE AND DECALS NAME PLA TE AND DECALS CONTR OL BO X GR OUP ENGINE OPERA TING P ANEL GR.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 109 DCA-400SSK — NAME PLA TE AND DECALS NAME PLA TE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 0800655603 DECAL: HANDLING PROCEDURES .............. 1 ......... S-2763A; S/N3692434 T O 3696509 C1551000503 DECAL; HANDLING PROCECURES .
P A GE 110 — DCA-400SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) DCA-400SSK — NAME PLA TE AND DECALS NAME PLA TE AND DECALS BONNET GROUP B A TTER Y GR OUP ENGINE AND RADIA .
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 111 DCA-400SSK — NAME PLA TE AND DECALS NAME PLA TE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS ENGINE & RADIA T OR GROUP 1 6 6360610304 DECAL: W A TER .......
P A GE 112 — DCA-400SSK — P AR TS AND OPERA TION MANU AL (STD) — REV . #3 (09/17/01) P A YMENT TERMS T er ms of payment f or par ts are net 10 da ys. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice.
DCA-400SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (09/17/01) — PAGE 113 NO TE P A GE.
HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P P P P P AR AR AR AR AR TS DEP TS DEP TS DEP TS DEP TS DEP AR AR AR AR AR TMENT TMENT TMENT TMENT TMENT 800/4.
An important point after buying a device Multiquip DCA-400SSK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip DCA-400SSK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip DCA-400SSK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip DCA-400SSK you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip DCA-400SSK will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip DCA-400SSK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip DCA-400SSK.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip DCA-400SSK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip DCA-400SSK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
