Instruction/ maintenance manual of the product ConnectFloor Multi-Link
Go to page of 9
AD-600 Installation Guide.
Installation Guide AD-600 General Information The main panels of the AD-600 are made of polypropy lene and are 2.36”(6 CM) in height. Cable trench caps are made of steel. Quick and easy installation is a strong advantage of the ConnectFloor systems.
2. Starting Line – laying instructions To maximize usage of full panels at the borders, it is recom mended that you select the longest walls or the entrance wall as starting point. Note: Properly selecting the starting line is import ant. It saves labor time and materials.
3. Installation a. Apply Sound Attenuation Blanket. Spray adhesive, duct tape, or 3M adhesive tape may be used to hold down the sound blanket to the sub floor.
grid of cable trench every 23.62”(60 CM) on center. (Drawing D609) Accessible Cable Trench - Clearance: 2.24”(57 mm) Width: 3.54”(90 mm) To assemble a module of 23.63” X 23.63”( 60 cm X 60 cm) coverage requires: 1 UniPanel + 1 Central Cap + 1 Base Connector + 4 Flank Caps D609 D610 f.
installation or service. (Drawing D609) Note: This ease eliminates fr equent coordination conflicts between trades. Instead of the contractors converging on job sites attempting to achieve opposite re.
facilitated by using sections of Wall Rail cut to length with a scroll saw and set down perpendicular to the edge of the last irregularly laid ConnectFl oor part. The sections’ varying lengths are carefully measured so that they will fill up the entire space between the wall and the ConnectFloor that is already installed.
These following pieces of trim may be used in cases where the edge of the flooring does not butt completely up against the wall. The UniPanels, as me ntioned in previous sections, can also be cut to meet up against the wall to finish the flooring matrix.
8 E-Mail: engsupport@multilinkbroadband.com Web: www.multilinkbroadband.com 580 Ternes Avenue P.O. Box 955 Elyria, OH 44035 Phone: 440.366.6966 Fax: 440.
An important point after buying a device Multi-Link ConnectFloor (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multi-Link ConnectFloor yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multi-Link ConnectFloor - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multi-Link ConnectFloor you will learn all the available features of the product, as well as information on its operation. The information that you get Multi-Link ConnectFloor will certainly help you make a decision on the purchase.
If you already are a holder of Multi-Link ConnectFloor, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multi-Link ConnectFloor.
However, one of the most important roles played by the user manual is to help in solving problems with Multi-Link ConnectFloor. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multi-Link ConnectFloor along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
