Instruction/ maintenance manual of the product TA5601 MTX
Go to page of 5
T A5601 Owner’ s Manual Introduction Thank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX amplifiers and matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to hear , feel, and experience all of the music the artist intended.
5. Gain Control – This feature is used to fine-tune the input sensitivity of the amplifier to the source unit’ s output level. 6. Low-Pass X-over Frequency Control with 24dB per octave Slope – This control allows the user to choose the exact low-pass frequency range the amplifier will play for the best possible performance.
Connections 1. Bi-Level Inputs (Low/High Level Input) with Smart Engage™ – Both a low and high level signal can be used. Be sure to lay the signal wire away from all power cables and vehicle computers. Use high quality twisted pair interconnect cables to decrease the possibility of radiated noise entering the system.
Note: When numerous amplifiers are used in the same system, look into using a relay with a separate power wire connected to an alternative power source to take the strain off the source unit. Normal source units can only keep a constant 12 volts to 2 or possibly 3 amps.
5. Adjusting the Quasi Parametric Equalizer – In some applications, the bass amplifier needs some help in boosting or cutting certain frequencies. A quasi parametric equalizer is distinguished from a parametric EQ in that it allows the user to control only the level and the center frequency of the boost or cut but not the “Q”.
An important point after buying a device MTX TA5601 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTX TA5601 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTX TA5601 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTX TA5601 you will learn all the available features of the product, as well as information on its operation. The information that you get MTX TA5601 will certainly help you make a decision on the purchase.
If you already are a holder of MTX TA5601, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTX TA5601.
However, one of the most important roles played by the user manual is to help in solving problems with MTX TA5601. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTX TA5601 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
