Instruction/ maintenance manual of the product TA7402 MTX Audio
Go to page of 6
T A7402 Owner’ s Manual Introduction Thank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX amplifiers and matching MTX speakers and subwoofers with StreetWires connections will put you in a better position to hear , feel, and experience all of the music the artist intended.
Note: Smart Engage™ is only active on the left input. 4. Input Sensitivity – The Input Sensitivity switch is used to set the proper input voltage range: X1 POSITION: 100mV–1V (T ypically for RCA Input) X10 POSITION: 1V–10V (T ypically for Speaker Level Input) 5.
Installation Mounting Place your Thunder amplifier at the predetermined mounting location. Use a felt pen to mark the exact position of the mounting holes on the mounting surface.
The gauge of the power and ground wire is often an overlooked aspect of amplifier installation. The more power the amplifier receives, the more power it will produce. Power cables have a natural resistance, and will lose voltage by the time the power makes its way to the amplifier .
standard for low pass crossover point is right around 90Hz. However , by experimenting with the crossover point (higher or lower) you will find what sounds best in this install. This amp uses a 24 decibel per octave roll off, which is pretty steep, or tapers off fairly quickly from the crossover point.
T rouble Shooting Read this if you want to be a do-it-yourselfer or give us a call at 800-CALLMTX. PROBLEM CAUSE SOLUTION No LED indication No +12V at remote connection Supply +12V to terminal No +12V.
An important point after buying a device MTX Audio TA7402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTX Audio TA7402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTX Audio TA7402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTX Audio TA7402 you will learn all the available features of the product, as well as information on its operation. The information that you get MTX Audio TA7402 will certainly help you make a decision on the purchase.
If you already are a holder of MTX Audio TA7402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTX Audio TA7402.
However, one of the most important roles played by the user manual is to help in solving problems with MTX Audio TA7402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTX Audio TA7402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
