Instruction/ maintenance manual of the product 3100 MTD
Go to page of 12
Safe Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty L Reel Mower m Moclels 3000 & 3100 MTD LLC, P.
To TheOwner 1 ThankYou Thank you for purchasing an MTD Reel Mower. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your machine.
Important Safe Operation Practices 2 WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine.
Do Not: 1. Do not mow near drop-offs, ditches or embankments, you could lose your footing or balance. 2. Do not mow slopes greater than 15 degrees. 3. Do not mow on wet grass. Unstable footing could cause slipping. Children Tragic accidents can occur if the operator is not alert to the presence of small children.
Assembly & Set-Up 3 Contents of Crate One Upper Handle Six Carriage Bolts One Grass Catcher (Model 3100) Two Mid Handles Six Wing Knobs One Operator's Manual One Lower Handle Six Saddle Washers One Product Registration Card Mower Set-Up Attaching the Handle 1.
Adjusting the Cutting Height The cutting height can be adjusted to between approximately 3/4-inch and 21/2-inches. Move the right-hand height adjustment lever outward and then position it forward (to lower the cutting height) or rearward (to raise the cutting height) before releasing it into the notch for your desired height.
Operation 4 Using YourLawnMower Please observe the following when operating your reel mower. Be sure lawn is clear of stones, sticks, wire, or other objects which could damage lawn mower or engine. _ WARNING: The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely.
Maintenance & Adjustments Maintenance General Recommendations Always observe safety rules when performing any maintenance. The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from warranty, operator must maintain the lawn mower as instructed here.
3. To test for proper adjustment: a. Lean the mower all the way back so that it's resting on the handle. b. Use one hand to slowly rotate the wheel of the mower, causing the blade reel to slowly turn. If the wheel is too difficult to turn, slightly loosen each adjustment screw.
Models 15A-3000 & 15A3100 @ @ ©.
Models 15A-3000 & 15A-3100 Ref, I 1 2 3 4 5 5 6 7 7 8 9 10 10 11 12 13 14 15 16 17 18 19 19 20 21 22 23 Part Number 720-04167 749-04811 749-04812 720-04169 749-04813 749-04814 710-05321 711-05531 .
MANUFACTURER'S LiMiTED WARRANTY FOR The limited warranty set forth below is given by MTD LLC with respect to new merchandise purchased and used in the United States and/or its territories and pos.
An important point after buying a device MTD 3100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MTD 3100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MTD 3100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MTD 3100 you will learn all the available features of the product, as well as information on its operation. The information that you get MTD 3100 will certainly help you make a decision on the purchase.
If you already are a holder of MTD 3100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MTD 3100.
However, one of the most important roles played by the user manual is to help in solving problems with MTD 3100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MTD 3100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
