Instruction/ maintenance manual of the product ART 2.4 Artsound
Go to page of 14
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 1/14 Manual ART 2.4.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 2/14 1. Warnings and sa fety ......................................................................................................... .................... 3 2. Dear customer ................
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 3/14 CAUTION: Please read this manua l thorou ghly before using the device! 1. Warnings and safety • Because the device generates heat wh en used, it needs to be positioned in a well-ventilated place, so it shou ld not be put i n a concealed space, such as a cupboard.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 4/14 2. Dear customer Thank you for entrusting us with yo ur confidence in our product and congratulations on choosing to buy th e ART 2.4 music distribution system. The device enables you to listen to yo ur favourite music in four different zones of a home, office or restaurant .
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 5/14 4. Technical specifications and connecting options Fig 1: Rear 1. Connection for RF aerial (BNC) 2. Serial port RS232 (DB9 female) 3. Setup button (configuration of controls) 4. Connection for FM aerial (black) 5.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 6/14 4.1 AUX line input • Input impedance: 20 Kohm • Standard cinch • Input preamplification: -6 / +6 dB • Max. input signal: 2V rms 4.2 Zone amplifi ers: • 4 x stereo class D (digital) high yield amplifier • 2 x 25W rms on 8/4 ohm for each zone (1.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 7/14 4.6 Power Supply • 230V~ 50HZ 4.7 Housing • Dimensions: B430 x D290 x H 60mm (without support legs) • Weight: approx.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 8/14 5.2 Connection to an external audio source An external sound source can be conne cted to the ‘ Audio in’ input of the AR T 1.4 via a quality cinch interconnect cable (e.g. Oehlbach).
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 9/14 • If the dimensions of the unit prev ent this or in order to improve reception, you can opt to use the square BNC connector. Twist the aerial to optimise reception. CAUTION • If the ART 1.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 10/14 • Press on the ‘Zone 1 – button‘ on the remote control. The appropriate LED lights up. • Next, press on the key with number 1. • The zone LEDs will start to flash temporarily.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 11/14 • If the installation is equipped with several remotes : take the next remote control and press once again on the ‘Zone 1 – button’; next press the key with number 1. Repe at this untill all remotes have been read in (max.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 12/14 5.8 Deleting programmed function from the memory There is a possibility to delete all programmed controls (remotes and wall mounted transmitters) from the me mory. This is done as follows: • Remove the plug from the mains socket.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 13/14 6. Press in Store key, followed by the preset no. (1-6) to store the radio station. 6.9 Using the RF wall-mounted tra nsmitter 1. Select external audio source ( AUX) 2. Select a radio preset (1-4) 3.
n.v Jobetrade s.a www.artsound.be info@artsound.be R1.1 ENG 14/14 6.4 ‘Party mode’ The so-called party-mode enables zones 2 to 4 to be linked to zone 1. In this way it is possible to turn two or more zones into a single zone. The individual controls for the connect ed zones therefore work for these connected zones.
An important point after buying a device Artsound ART 2.4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Artsound ART 2.4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Artsound ART 2.4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Artsound ART 2.4 you will learn all the available features of the product, as well as information on its operation. The information that you get Artsound ART 2.4 will certainly help you make a decision on the purchase.
If you already are a holder of Artsound ART 2.4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Artsound ART 2.4.
However, one of the most important roles played by the user manual is to help in solving problems with Artsound ART 2.4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Artsound ART 2.4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
