Instruction/ maintenance manual of the product MH9B Mr. Heater
Go to page of 8
OPERATING INSTRUCTIONS AND OWNER’S MANUAL READ INSTRUCTIONS CAREFULLY: Read and follow all instructions. Place instructions in a safe place for future reference. Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater.
2 Mr. Heater | Portable Buddy Operating Instructions and Owner’s Manual WARNING: Every time hose or tank is connected to unit, con- nection must be checked for leaks in one or more ways: Apply soapy water to connection, look for bubbles, listen for hiss of escaping gas, feel for extreme cold, smell for rotten egg odor.
3 Operating Instructions and Owner’s Manual Mr. Heater | Portable Buddy 05/12/06 73432CAL Rev. L1 GENERAL INFORMATION: • This heater is safe for indoor use in small recre- ational enclosures, havi.
4 Mr. Heater | Portable Buddy Operating Instructions and Owner’s Manual • After burner tile has turned bright orange, adjust heat output by turning Control Knob to desired position (“LO” or “HI” setting) Warning: DO NOT OPERATE HEATER UNLESS CONTROL KNOB IS LOCKED IN A POSITION MARKED “HI”, “LO” or “PILOT”.
5 Operating Instructions and Owner’s Manual Mr. Heater | Portable Buddy 05/12/06 73432CAL Rev. L1 • Depress and turn Control Knob counterclockwise to “PILOT” position and hold for 1 - 2 minutes. This may take longer to purge air from the supply hose depending on the length of the hose being used.
6 Mr. Heater | Portable Buddy Operating Instructions and Owner’s Manual calibrated ruby that controls the gas flow. 9 Apply air pressure (max. 30 psi.) into ceramic tile of burner assembly and the venturi tube (with cone on end, ref. item #21) to remove dust, lint or spider webs.
7 Operating Instructions and Owner’s Manual Mr. Heater | Portable Buddy 05/12/06 73432CAL Rev. L1 Mr. Heater • Portable Buddy • Model # MH9B ExplodedBuddy_rev a.
8 Mr. Heater | Portable Buddy Operating Instructions and Owner’s Manual Enerco Group, Inc. reserves the right to make changes at any time, without notice or obligation, in colors, specifications, accessories, materials and models. WARNING: USE ONLY MANUFACTURER’S REPLACEMENT PARTS.
An important point after buying a device Mr. Heater MH9B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mr. Heater MH9B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mr. Heater MH9B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mr. Heater MH9B you will learn all the available features of the product, as well as information on its operation. The information that you get Mr. Heater MH9B will certainly help you make a decision on the purchase.
If you already are a holder of Mr. Heater MH9B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mr. Heater MH9B.
However, one of the most important roles played by the user manual is to help in solving problems with Mr. Heater MH9B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mr. Heater MH9B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
