Instruction/ maintenance manual of the product 403 Series Mr. Coffee
Go to page of 8
.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Read all instructions before using the machine. 1. 2. For Under-Cabinet Coffeemakers: A.
Table Of Contents Page # Important Safeguards ........................................................................................................... 2 Cord Set Instructions .........................................................................
5. Read carefully the following instructions for installation. Familiarize yourself with the mounting hardware and procedure, before you begin actual installation. Installing The Coffeemaker 1. Hold the coffeemaker up to the installation site with the front face of the coffeemaker flush with the cabinet face.
14. Finish tightening the screws. 15. Secure the power cord against the cabinet bottom or rear wall by using the two Adhesive-backed cord clips. Removing The Coffeemaker 1. 2. Remove the glass decanter and brew funnel. After use, allow the coffeemaker to cool completely.
IMPORTAN T To Reset Auto Brew at Pre-Set Time.. . This coffeemaker will NOT automatically come on again the next day if you leave the switch in the AUTO position after its last use. This is a safety feature. Each time you choose to use auto brew you must slide the switch to OFF and then to AUTO.
Automatic Shut Off 1: Once your coffeemaker is on, the coffee in the decanter will stay hot for 2 hours. Then, as a safety feature, the coffeemaker will shut itself off. 2. You will know that your coffeemaker has automatically shut off when the red AUTO OFF LIGHT has appeared in the lower right hand corner of the clock display.
Precautions When Using This Machine ! Avoid areas of the coffeemaker which may become hot or emit steam when the machine is “on”, particularly the brew funnel and the rear vent knob. ! Avoid jerking or straining the power cord when unplugging. Grasp the molded plug to unplug.
An important point after buying a device Mr. Coffee 403 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mr. Coffee 403 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mr. Coffee 403 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mr. Coffee 403 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Mr. Coffee 403 Series will certainly help you make a decision on the purchase.
If you already are a holder of Mr. Coffee 403 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mr. Coffee 403 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Mr. Coffee 403 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mr. Coffee 403 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
