Instruction/ maintenance manual of the product ICR280 Mpman
Go to page of 36
ICR-280 DIGIT AL V OICE RECORDER OPERA TON MANUAL.
Note: If the unit is left unused for a long period, please turn of f the POWER switch. Do not use the unit in places that ar e extre mely hot, cold, dusty , or hu mid.
2 Features ¤ LCD display , easy to operate. ¤ Built-in loud-speaker ¤ Built-in high-sensitive microphone ¤ Support twos types of recording: HQ and LQ ¤ V oice-controlling recording ¤ T elephone .
Instruction of cover 1-Earphone jack 2-Mic/Line-in cable 3-Lock 4-Un-Lock 5-REC indicator light 6- LCD display 7-Play/Pause/Stop 8- Record/A-B repeat 9-Built-in microphone 10- USB interfac e 1 1-M (MO.
Introduction to display 4 1-Recording type indicator 2-Battery indicator 3-MP3/WMA/DVR icon 4-Turnt able icon 5-V olume indicator 6-V olume switch 7-Repeat indicator 8- LQ indicator HQ indicator 9-Rec.
Basic operation 1-Power supply It is powered by AAA battery; please buy th e rechargeable battery with large capacity . When the remaining capacity of battery indication shows please change the battery in time. 2-Power on/off Power on: shortly press button to turn on the unit, the LCD display the logo and enter the DVR mode under stop status.
DVR mode 2.1. Recording Under any mode or state(except for poweri ng off), shift REC to “REC”, the unit will enter the recording state, LCD displays “ ● ” and recording icon “ ”, recording indicator light will become bright and shine during r ecording, the unit star t to record.
3) Power off: under playing or pause status, continuously press button until the LCD display OFF . Release the button to turn off the unit. Note: under pause or stop status, the unit will au tomatically turn off if no operation were conducted within 3minutes 2.
cancelled point. 2) Press “Play/Pause” to cancel AB repeat and pause playback. 3) Press “Play/Pause’ to cancel A-B repeat and stop playback. 2.
9 to delete current file. If you press other buttons except PLA Y and EQ or no operation was conducted within 5 seconds, the unit will gi ve up delete and return to stop status. Note: this unit only supports W A V files in IMA ADPC M format 2.9 Tim e indication of files recorded 1 ） .
1). Open and run “sound converter ”, click “open” 2). Select the REC files you want to convert 3). Clock “convert” and start the converting Besides, the software can also play W A V and Mp3 format files.
please create a new folder, m ove the files record ed previously to the newly-created folder, then continue recording. 3.1 MP3 mode Under stop or pause status, press button to play current file NOTE: The unit can play the files in MP3 (The 3r d layer of MPEG1, MPEG2, MPEG3, MPEG2.
was conducted within 3 minutes. 3.3 previous / next file, FF/R W Under playback status, shortly press - button to skip to the previous file; shortly press + button to skip to the next file.
Under stop status, continuously press EQ button to enter delete mode. Then the LCD will display DELETE and ONE and the indicator will flash to be confirmed.
14 time recording. 4.1High quality (HQ) r ecording and low quality (LQ) recording operating The unit has two ways of recording: High quality and low quality . NOTE: Under REC Mode, icon “HQ/LQ” indicat es the format of files recorded; under DVR mode, icon of “HQ/LQ” indicates the format of the current recording f iles.
15 exceeds 9999 minutes, hour will be used as the unit of time, for instance, remaining time is 12345 minute, it will displays as: 206h, unit (hr). PC link operation CONNECTING TO A COMP UTER 1). Installation of driving program Note: a. W indows 98 base needs installati on of driving program, while W indows 2000 / XP / I do not.
Installation is finished. 2).Connecting to a computer Connect your MP3 player to PC via USB cable, Press or under condition that MP3 player has been turned on, the window will appear indicating that n.
has been found, then the system will auto ma tically install the drive program. After it, a removable disk icon (see following) will be found in "My computer " with "PC----" on LCD display .
b. When you want to unplug the M P3 player from the USB port of the computer , be noted to "PC-----" on LC D. If LCD is blinking with "USB-SA" or "USB-rd" , it indicates that data is being transferred. Unplug the MP 3 player when it displays "PC -----".
19 d. Click “OK” on the pop-up window . See the following window . Y ou may then unplug the M P3 player from USB port after the above steps. 4). Upgrade/Renew Software The software needn’t to be upgraded unless the player works abnormally , i.e.
B. Press , or MP3 has already been in ON status, then a Removable Disk icon will appear in “ My Computer ” , see picture a: C. Steps: S tart>Program>SigmaT el MSCN Audio Player>SigmaT el MSCN Firmware Download, see the fo llowing picture b.
C d Note: if you want to format data ar ea of the flash while upgrading, you need to choose Format Data Area. System will pop out a window as the following picture.
D. Click “Start” button and start upgrading so ftware, see as follows: E. After upgrading, please click “Close” button. 5) Format the MP3 Player A. Press after connecting the player to the computer . B. Click “Removable Disk” with right button of the m ouse, and choose "Format" from the menu, see the left picture: C.
23 D. Click “Start” in the form at window . Then click “OK” button in the pop-out window and start formatting MP3 flash..
E. After for matting, click “OK” button in the right picture. 6) Uninstall the driving program A. Disconnect the player to the computer. B. According to the following picture, click Start>Progr.
Immediately the following window will pop out. Click “Cancel” if you want to cancel the operation, otherwise the following: Conversation window will appear . Click “OK” to start cancel the driving pr ogram, with the following conversation window appears then.
26 Note: This driving program may prev ent driving program installation of other MP3 products. Download drivi ng program manually under device manager or refer to the technical support of our company . Steps for downloa ding driving program manually: A.
Click Driver>Update Driver… the following windows will pop-up. 27.
Click NEXT on each continuously appearing window . 28.
B.under W indows 98/ME, right click “My com puter>Properties> Device Manager”, to check whether there is “Pla yer Recovery Device” in device manager, see following picture.
Click Driver>Update Driver… 30.
31 ① ② ③ ④ Installation is finished..
32 T rouble Shooting 1. Why can’t some MP3 f iles be played? Standard MP3 only includes: the songs in la yer 3 of MPEG 1, layer 3 of MPEG 2 and layer 3 of MPEG 2.5. Otherwise, it won’ t be played in the player except transformed by the corresponding software.
33 4. What causes the MP3 player running slowly? Using or deleting files frequently in a long time will generate fragments in the flash memory , like frag ment in the hard disk, which will cause the player running slowly . 5. What if th e driving program of the MP 3 player be damaged? This is caused by improper operation.
34 Specification Time of REC: 133hrs in LQ/LP , 8hrs in HQ/HP (Softw are in the unit itself takes a little part of space, thus the exact time will be le ss than standard one while using, as for the exact time used to record, please refe r to the remaining time of this unit.
For more in formation, please visit our we bsite www .mp mane urop e.co m 35.
An important point after buying a device Mpman ICR280 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mpman ICR280 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mpman ICR280 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mpman ICR280 you will learn all the available features of the product, as well as information on its operation. The information that you get Mpman ICR280 will certainly help you make a decision on the purchase.
If you already are a holder of Mpman ICR280, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mpman ICR280.
However, one of the most important roles played by the user manual is to help in solving problems with Mpman ICR280. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mpman ICR280 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
