Instruction/ maintenance manual of the product Blender & mill Morphy Richards
Go to page of 8
Blender & mill Blender & mill Blender & mill Blender & mill Blender & mill Please read and keep these instructions www .morphyrichards.co.uk getting the best from your new blender and mill Safety first The blender and mill blades are very sharp, therefore handle with care when using and cleaning.
2 Important safety Important safety Important safety Important safety Important safety instructions instructions instructions instructions instructions The use of any electrical appliance requires the following basic common sense safety rules. Primarily there is danger of injury or death and secondly the danger of damage to the appliance.
3 • Do not overfill the blender . This could cause damage to the motor . The 3A fuse will blow if the blender is over loaded. Replace fuse and do not exceed the maximum recommended volumes. Refer to the operating chart. • Do not blend or mill for longer than the time periods recommended in the operating chart.
4 Operating controls Operating controls Operating controls Operating controls Operating controls The blender control switch has the following settings. Pulse, off, speed 1 and speed 2. The speed can be adjusted whilst the blender is in use. Using the pulse button allows greater control over the texture of the food produced.
5 DO NOT OVER PROCESS FOR LONGER THAN RECOMMENDED TIME DO NOT EXCEED RECOMMEDED MAXIMUM VOLUMES Blending/ liquidising Soups, purees, drinks, milkshakes, batters 1.
6 Cleaning and storage Cleaning and storage Cleaning and storage Cleaning and storage Cleaning and storage BEFORE CLEANING, SWITCH OFF AND UNPLUG THE MAINS LEAD. After use, fill the blender or mill attachment with warm water and run for 30 seconds on the pulse setting and repeat as necessary .
7 Helpline Helpline Helpline Helpline Helpline If you have any difficulty with your appliance, do not hesitate to call us. We’re more likely able to help than the store from where you bought it. Please have the following information ready to enable our staff to deal with your query quickly .
Your two year guarantee • It is important to retain the r etailers receipt as pr oof of purchase . Staple your receipt to this back cover for future reference. Please quote the following information if the product develops a fault. These numbers can be found on the base of the product.
An important point after buying a device Morphy Richards Blender & mill (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Morphy Richards Blender & mill yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Morphy Richards Blender & mill - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Morphy Richards Blender & mill you will learn all the available features of the product, as well as information on its operation. The information that you get Morphy Richards Blender & mill will certainly help you make a decision on the purchase.
If you already are a holder of Morphy Richards Blender & mill, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Morphy Richards Blender & mill.
However, one of the most important roles played by the user manual is to help in solving problems with Morphy Richards Blender & mill. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Morphy Richards Blender & mill along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
