Instruction/ maintenance manual of the product ST-90 Morel
Go to page of 22
SoundS pot TM SoundS tand TM ST -90, ST -95 SoundCenter TM C-5 SoundSub TM IS-9A, RS-91A, RS-10A SoundSub TM RS 91-P Owner's Manual and Inst allation Instructions Owner's Manual and Inst all.
Content s Important Notes The SoundS pot TM Range SoundS pot TM SoundS tand TM ST -90, ST -95 SoundCenter TM C-5 SoundSub TM IS-9A, RS-91A, RS-10A SoundSub TM RS 91-P.
Thank you for choosing Morel loudspeakers Y our speakers have been handcrafted by Morel from the highest- quality materials and components. Utmost attention and care have been devoted to every detail of the design and construction, to ensure your long-lasting enjoyment of the product.
The SoundS pot TM Home Theater Range APPLAUSE SUPRA VITRA SPIRO EVIT STREAM METRO COMP A NOV A BEA T Five SoundS pot TM SA-2, SoundSub TM IS-9A Four SoundS pot TM SA-2, SoundCenter TM C-5, SoundSub TM.
Thank you for choosing Morel's SoundS pot TM . These award- winning speakers are unique in design and construction, offering extraordinary sound quality for both stereo and home theatre applications in an attractive design.
Mounting the SoundS pot TM S peakers The SoundS pot TM speakers are equipped with a pivoting base that turns 180°. T o change the orientation of the base, to best conceal the base in the selected mounting option, loosen the screw that locks the base position (located under the base), rotate the base a full 180° and firmly tighten the screw .
T o mount your SoundS pot TM speaker on a ceiling or wall, first choose the location of the speaker and mark the precise spot where you will drill a hole to line up with the hole in the speaker base. Next drill a hole in the wall using a 7mm (1/4”) bit, and insert the plastic plug.
ST -95 Insert the tapered tube into the cone in the base. ST -90 Next, fasten the screw tight with the supplied Allen wrench. SoundS pot TM ST -90, ST -95 Installation Instructions (optional unit s) Carefully fasten the tapered tube to the base. Make sure that the tube is perpendicular to the base .
Slip the speaker cable through the hollow tube, and out of the opening near the top of the tube (under the bolt). Finally , connect the speaker to the stand by removing the speaker base (fig. A) and inserting the exposed joint into the stand tube (fig.
Caring for the SoundS pot TM S peakers T o protect the speaker components, avoid operating the speaker in extreme humidity or adverse temperature conditions.
SoundCenter TM S peaker Placement The SoundCenter TM C-5 speaker should be positioned as close to your TV screen as possible. The speaker is magnetically shielded to prevent screen distortions. Thank you for choosing Morel's SoundCenter TM C-5. This high performance center speaker is designed to provide a memorable home theater experience.
Connect the red or (+) centre speaker output terminal of your amplifier to the red input terminal on the speaker , and connect the black or (-) centre speaker output terminal on the amplifier to the black input terminal on the speaker . Unplug the electrical connection of the amplifier before making any connections.
SoundSub TM IS-9A, RS-91A, RS10A Safety Instructions Read The Instructions Please read all safety and operating instructions carefully before using or connecting your SoundSub TM subwoofer .
S peaker Placement In designing the subwoofer , we have made every effort to make it unobtrusive in the environment, by its slim cabinet design. Unlike surround or stereo speakers, which must be placed to project directly to the listeners' ears, the subwoofer moves all the air in the room and can be placed wherever convenient.
RS-91A, RS10A POWER ON AUTO LINE OUT IN PHASE CROSSOVER LEVEL R+ R- R+ R- L+ L- L+ L- HIGH LEVEL IN HIGH LEVEL OUT 0 180 40 160 MIN MAX 3 4 5 6 7 L R L R 1.2 2 LINE HIGH LEVEL OUT 6 7 8 PHASE 180 0 OUT IN L R L R CROSSOVER 40 160 LEVEL MIN MAX 230V 1 15V POWER ON AUTO HIGH LEVEL IN R+ R- L+ L- R+ R- L+ L- 2 5 4 1.
2. RCA jacks The input terminals connect to the subwoofer (line level) outputs of an amplifier . The output terminals provide an input bypass for connection to a second subwoofer , or any other purpose. 3. PHASE control The phase control allows phase adjusting of the subwoofer to match that of the other speakers in your home theater system.
7. VOL T AGE SELECTOR switch Before operating, adjust the position of the voltage selector switch to 1 15V or 230V , according to the power supply in your country . 8. AC outlet Power supplied through this outlet is turned on and off by the POWER switch.
of your amplifier to the L+ terminal on your subwoofer , and the black or (-) left speaker output terminal on the amplifier to the L- terminal on the subwoofer .
SoundSub TM RS 91-P Thank you for choosing Morel's SoundSub TM Subwoofer . The SoundSub TM RS 91-P are p assive subwoofers, designed to complement your system in the low bass range, reproducing frequencies below 200 Hz.
The back panel of the SoundSub TM subwoofer offers two p airs of inputs, coloured red and black, respectively . Connect the subwoofer to both stereo channels, using the top pair for one channel and th.
Caring for Y our SoundSub TM Subwoofers T o assure long-lasting enjoyment from your subwoofers, we recommend that you follow a few guidelines, which are appropriate for every speaker system: Do not increase the volume beyond the capabilities of your amplifier .
www .morelhifi.com.
An important point after buying a device Morel ST-90 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Morel ST-90 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Morel ST-90 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Morel ST-90 you will learn all the available features of the product, as well as information on its operation. The information that you get Morel ST-90 will certainly help you make a decision on the purchase.
If you already are a holder of Morel ST-90, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Morel ST-90.
However, one of the most important roles played by the user manual is to help in solving problems with Morel ST-90. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Morel ST-90 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
