Instruction/ maintenance manual of the product 5CSR60AGD Series Monte Carlo Fan Company
Go to page of 9
Owner ’ s Manual Ceiling F an Installation Instructions For 5CSR60AGD Series Fans READ AND SAVE THESE INSTRUCTIONS T otal fan weigh with light.
Installation work and electrical wiring must be done by qualified person(s) in accordance with applicable codes and standards (ANSI/NFP A 70- 1999), including fire-rated construction. Use this unit only in the manner intended by the manufacurer . If you hav e any questions contact the manufacturer .
Loosen lock nuts and screws on yoke till you can not feel screw on inside of yoke. Remo ve keeper from cross pin and then cross pin from yoke. R eplace keeper on cross pin and sav e. 9 10 Lift mounting neck to mounting Plate and align s crews. 7 S ecure mounting neck to the mounting plate w ith four screws to become a complete mount- ing bracket.
Tighten screw on arch hub into downrod to hold in place. 21 Tighten set screw to hold ball in place. 26 Raise fan with downrod assembled to the ceiling brack et and hang fan assembly . Be sure to rotate the downrod ball so that the notch in the brack et engages the slot in the ball.
Install remote receiver by sliding into opening in the Mounting bracket. Mak e sure that the dip switches on the T ransmitter and the R eceiver are set to the same position. See page 7 for remote operation. 31 M ake wire connections to power source using w ire nuts provided.
Install glass onto light kit, install r ubber washer and hex nut to hold in place and tighten in direction of arrow . 45 Install finial cap and finial nut and tighten in direction of arrow . 46 Remo ve hex nut and rubber washer f rom light fitter . 44 Remo ve finial nut from light fitter .
Remote Control Transmitter Features: FAN SPEED Depress “l dot” for low speed, “2 dots” for medium or “3 dots” for high. T o turn fan off press square” . LIGHT DIMMER T o turn light on, press light dimmer once quickly . T o turn off press once quickly while light is on.
1.Check main and branch circuit fuses or circuit break ers. 2 .Check line wire connections to fan and switch wire connections in switch housing. 3.Check to make sure the dip switches from the tr ansmitter and receiver are set on the same frequency . CAUTION: Make sure main power is turned off 1.
6/21/06 REV .0 New made from 5GMR manual.
An important point after buying a device Monte Carlo Fan Company 5CSR60AGD Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Monte Carlo Fan Company 5CSR60AGD Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Monte Carlo Fan Company 5CSR60AGD Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Monte Carlo Fan Company 5CSR60AGD Series you will learn all the available features of the product, as well as information on its operation. The information that you get Monte Carlo Fan Company 5CSR60AGD Series will certainly help you make a decision on the purchase.
If you already are a holder of Monte Carlo Fan Company 5CSR60AGD Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Monte Carlo Fan Company 5CSR60AGD Series.
However, one of the most important roles played by the user manual is to help in solving problems with Monte Carlo Fan Company 5CSR60AGD Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Monte Carlo Fan Company 5CSR60AGD Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
