Instruction/ maintenance manual of the product BUF400 Monessen Hearth
Go to page of 20
.
2 61D1013 .
61D1013 3 9. The installation must conform with local codes or , in the absence of local codes, with the 10. This unit complies with ANSI Z21.
4 61D1013 Continuedfrompage3 15. An unvented gas-fired heater uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be provided.
61D1013 5 The BUF 400 and BU F500 are vent -fr ee fi rebo xes and featu re a self cont aine d hea t-c irc ulat ing syst em. Th is un it al so features a 2-in1, flexible-face system that converts the circulating system into a radiant system in seconds.
6 61D1013 BUF400: 24 13 / 16 " 2 3 / 16 " 6 9 / 16 " 10 3 / 8 " 14 7 / 16 " BUF400: 40" BUF400: 36" 24 1 / 4 " 6 1 / 2 " 21 9 / 16 " 21" 34".
61D1013 7 17" 21 1 / 2 " BUF400: 35 1 / 2 " BUF400: 20 3 / 8 " BUF500: 26 3 / 8 " BUF500: 41 1 / 2 " .
8 61D1013 9" Minimum 42" Minimum 9" Minimum Ensure that minimum clearances shown in Figures 4 through 7 are maintained. Left and right clearances are determined when facing the front of the firebox. Follow these instructions carefully to ensure safe installation.
61D1013 9 12" 10" 8" 6" 2 1 / 2 " 12" 16" 19" 21" 23" and 4. The ca no py sup pl ie d w ith th e uni t must be installed.
10 61D1013 20 5 / 16 " 400: 40 1 / 4 " 400: 66 1 / 8 " 400: 24 13 / 16 " 500: 30 13 / 16 " 500: 46 1 / 4 " 500: 72 5 / 8 " 400: 46 3 / 4 " 500: 51 3 / 8 " .
61D1013 1 1 1. Bend out the nailing flanges located on each side of the firebox. 2. Slide the firebox into prepared framing or position firebox in its final position and frame later . 3. Level the firebox by checking the top edge of the firebox.
12 61D1013 Consult all local codes. All gas piping must be installed to comply with local codes, or in the absence of local codes, with the latest edition of the National Fuel Gas Code ANSI Z223.
61D1013 13 A canopy is furnished with each firebox and MUST be installed for safe operation. SeeFigure14. 1. Locate three (3) holes at the top of the front frame.
14 61D1013 If you are installing the forced air kit, Model F A2A, see the installation instructions provided with the kit for electri- cal wiring requirements, or the blower installation section.
61D1013 15 1 2 3 3 .
16 61D1013 8'max. 1. Locate combustion air assembly at an exterior location which is not likely to be accidentally blocked in any manner .
61D1013 17 The use of outside air for combustion is optional unless required by building codes. It is only necessary to supply outside combustion air to one side of the fireplace.
18 61D1013 7. If the duct is the insulated type, push the insulation back from one end of the duct approximately 2".
61D1013 19.
The following components are warranted for life to the original owner , subject of proof of purchase: Firebox, Combustion Chamber , Heat Exchanger , Grate, and Stainless Steel Burners.
An important point after buying a device Monessen Hearth BUF400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Monessen Hearth BUF400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Monessen Hearth BUF400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Monessen Hearth BUF400 you will learn all the available features of the product, as well as information on its operation. The information that you get Monessen Hearth BUF400 will certainly help you make a decision on the purchase.
If you already are a holder of Monessen Hearth BUF400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Monessen Hearth BUF400.
However, one of the most important roles played by the user manual is to help in solving problems with Monessen Hearth BUF400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Monessen Hearth BUF400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
