Instruction/ maintenance manual of the product MEH 631 Moffat
Go to page of 12
ELECTRIC HOB MEH 631 INSTRUCTION BOOKLET Please read this instruction booklet before using the appliance Keep this instruction book for future reference and ensure it is passed on to any new owner. 1 3 2 5 4 6 7 1. Hob T op 2. Normal Hotplate - 1500 W -180 mm dia.
2 Import ant Safety Information You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 950950 Inst allation z This hob must be installed by qualified personnel, according to the manufacturer's instructions and to the relevant British S tandards.
3 z This hob should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used. Environmental Information z After installation, please dispose of the packaging with due regard to safety and the environment.
4 Hints and Tips Saucepans for use on solid plates should have several characteristics: z They should be fairly heavy duty z They should fit the heat area exactly , or be slightly larger for efficient use, NEVER smaller . z They should have a flat base to ensure good contact with the plate.
5 SYMPTOM The plate does not heat up SOLUTION Check that the unit is plugged in and the electrical supply is switched on Check that the RCCB has not tripped (if fitted) Check the mains fuse has not blown Check the correct control knob has been turned.
6 Overall dimensions Cut out dimensions Width: 580 mm. Width: 550 mm. Depth: 500 mm. Depth: 470 mm. Engineers technical data Instructions for the Inst aller Heating elements Ratings Normal front left .
7 Import ant safety requirement s This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British S tandards Codes Of Practice: B.S. 6172/ B.S. 5440, Par . 2 and B.
8 FO 0763 FO 0764 Dimensions are given in mm. Building In Building over a cupboard or drawer If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface.
9 L N Wiring Diagram The hob should be connected to a double pole switch with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations. The switch should be sited within 2m of the hob and be easily accessible upon completion of the installation.
10 Service and S p are Parts If you require spare parts or an engineer contact your local Service Force Centre by telephoning: 08705 929 929 Your call will be routed to the Service Centre covering your post code area. The addresses of Service Force Centres are detailed on the following pages.
11.
Grafiche MDM - Forlì 35676-3003 05/06 www .electrolux.com.
An important point after buying a device Moffat MEH 631 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Moffat MEH 631 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Moffat MEH 631 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Moffat MEH 631 you will learn all the available features of the product, as well as information on its operation. The information that you get Moffat MEH 631 will certainly help you make a decision on the purchase.
If you already are a holder of Moffat MEH 631, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Moffat MEH 631.
However, one of the most important roles played by the user manual is to help in solving problems with Moffat MEH 631. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Moffat MEH 631 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
