Instruction/ maintenance manual of the product GL 4 Ti Ariston
Go to page of 13
MTS MAKES USE OF RECYCLED P APER 029.1.60.435.2.00 0604 Litograf s .r .l. Jesi Controlled Energy Cor p . 340 Mad River P ar k W aitsfield, VT 05673 800-798-8161 www .
The installer should revie w the contents of this manual with the owner upon completion of installation, and the manual should be left with the owner and placed in a location close to the installation.
T emperature & pressure relief valve, 3/4 NPT male T emperature & pressure relief valve, 3/4 NPT male 3/4 NPT female tapping for relief valve 3/4 NPT female tapping 3/4 NPT female tapping 3/4 NPT female tapping for relief valve Hot water outlet 1/2 NPT male 3/4 NPT female tapping for relief valve FIG.
FIG. 2/1 DIMENSIONS FOR GL 2.5Ti - GL 4Ti DIMENSIONS FOR GL 8Ti (HORIZONT AL INST ALLA TION) DIMENSIONS FOR GL 8 Ti (VERTICAL INST ALLA TION) FIG. 2/2 FIG.
General remarks The manuf acturer cannot be responsible f or the damages caused by improper installation or by f ailure to follow instructions in this pamphlet. Comply with the installation instructions before completing electric connection. The thermostat has been pre-set at the factory at or below 51.
MODEL GL 2.5Ti - GL 4Ti The GL 2.5Ti and GL 4Ti water heaters can be installed under the sink. F asten the supplied mounting bracket to the w all. Use screws that are suitab le for the wall material and the weight of the heater . Hang the water heater on the brack et.
Heater can sit on floor . Connect the cold water inlet pipe to the inlet nipple (marked with a b lue ring) and the hot water outlet pipe to the outlet nipple (marked with a red ring).
Maintenance instructions Note: Do not attempt to repair this water heater your self. Call a ser vice person for assistance. Alwa ys turn off the power suppl y to the heater prior to servicing or draining the heater . P eriodic maintenance Note: For most of these operations, the water will have to be drained from the heater .
Changing the anode rod REPLA CEMENT OF P ARTS B) Once the element has dried up, use a soft brush (non metallic to pre v ent damaging the stainless steel sheath) on element. Brush the dried mineral off. Reinstall the element with gasket and mak e the wire connections.
9 W ater does not get hot Light not on Bro wn water Odor in water W ater is too hot W ater not hot enough Leaking T roub leshooting 1. Make sure the pow er supply is on and working. 2. If light does not come on, check that the reset button is pushed in; follow steps from previous section.
10 DESCRIPTION REF . P ART CODE DESCRIPTION REF . 1 100XL V AL VE (T&P 3/4”) ABC 2 570241 ANODE (MA GNESIUM) C 2 574305 ANODE (MA GNESIUM) AB 3 994147 GASKET WITH 4 BOL TS ABC 4 994140 LOCK NUT .
ARIST ON GL Ti • LIMITED 8 YEARS W ARRANTY CO VERAGE ARIST ON, THROUGH ITS U.S . DISTRIBUTOR CONTROLLED ENERGY CORP ., (hereinafter CEC) guarantees this water heater to the Owner (hereinafter “Owner”) of the w ater heater at the original installation location against defects in material and workmanship f or the periods specified below .
MTS MAKES USE OF RECYCLED P APER 029.1.60.435.2.00 0604 Litograf s .r .l. Jesi Controlled Energy Cor p . 340 Mad River P ar k W aitsfield, VT 05673 800-798-8161 www .
An important point after buying a device Ariston GL 4 Ti (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ariston GL 4 Ti yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ariston GL 4 Ti - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ariston GL 4 Ti you will learn all the available features of the product, as well as information on its operation. The information that you get Ariston GL 4 Ti will certainly help you make a decision on the purchase.
If you already are a holder of Ariston GL 4 Ti, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ariston GL 4 Ti.
However, one of the most important roles played by the user manual is to help in solving problems with Ariston GL 4 Ti. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ariston GL 4 Ti along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
