Instruction/ maintenance manual of the product 8713 Moen
Go to page of 4
KITCHEN W ALL MOUNT F AUCETS Models 8713, 8714 INST ALLA TION INSTRUCTIONS THESE INSTRUCTIONS MUST BE LEFT WITH HOMEOWNER MT149A ® CAUTION: Always turn water off before disassembling the valve. Open valve handle to alleviate water pressure to insure that complete water shut-off has been accomplished.
Disassembly 1. Turn “OFF” both hot and cold water supplies. Turn faucet on to relieve pressure and insure complete shut-off.. Pull handle cap up and off (it snaps into place). Remove the handle screw, (Illustration 1). 2. Push the cartridge stem down and then lift and tilt handle lever and handle body off.
Reassembly 1. With cartridge stem UP , insert cartridge with ears aligned front to back (illustra- tion 4). 2. Push the cartridge down by the ears (Illustration 5) until the top of the ears are flush with the top of the body. 3. Turn notched flat of cartridge stem toward front of sink.
MT149A SEP 95 © Copyright, 1995 Moen Incorporated Printed in U.S.A. Consumer Information Faucets made of leaded brass alloys may contribute small amounts of lead to water that is allowed to stand in contact with the brass. The amount of lead contributed by any faucet is highest when the faucet is new .
An important point after buying a device Moen 8713 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Moen 8713 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Moen 8713 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Moen 8713 you will learn all the available features of the product, as well as information on its operation. The information that you get Moen 8713 will certainly help you make a decision on the purchase.
If you already are a holder of Moen 8713, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Moen 8713.
However, one of the most important roles played by the user manual is to help in solving problems with Moen 8713. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Moen 8713 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
