Instruction/ maintenance manual of the product 2200 Series Moen
Go to page of 4
MT659C MODELS 2200, 2400 & 72200 SERIES INST ALLA TION INSTRUCTIONS THESE INSTRUCTIONS MUST BE LEFT WITH HOMEOWNER TUB AND SHOWER V AL VES All models have 4 port castings. Stops are optional on all models. All models are also available for 1/2 inch I.
MT659C Stop Operation CC - This type is integral with casting, actuated by screwdriver, and require a 90 ° turn to open or close. When the screwdriver slot is vertical, the rubber stop is closed, and when the slot is horizontal, the rubber stop is open.
Disassembly Turn OFF both hot and cold water supplies, then open faucet to relieve pressure. Remove handle cover from handle knob. Take out handle screw and remove handle knob, washer, and stop tube.
HELPLINE: Call our toll free Helpline number, for answers to any product, installation, replacement parts, or warranty questions. 25300 Al Moen Dr., North Olmsted, OH 44070-8022 U.
An important point after buying a device Moen 2200 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Moen 2200 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Moen 2200 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Moen 2200 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Moen 2200 Series will certainly help you make a decision on the purchase.
If you already are a holder of Moen 2200 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Moen 2200 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Moen 2200 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Moen 2200 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
