Instruction/ maintenance manual of the product SW-150 MK Sound
Go to page of 12
frameless in-wall speaker operation manual Miller & Kreisel Sound Corporation 9351 Deering A venue Chatsworth, CA 91311-5858 (818) 701-7010 fax (818) 701-0369 www .
T able of Contents 1. Introduction ...................................................................................................3 Figure 1 - Major Components of the SW -150 .........................................3 2. Speaker Hookup ...........
1. INTR ODUCTION Congratulations! Y our new M&K in-wall speak er system will giv e you y ears of unmatched enjo yment and e xcitement while listening to your f a vorite musical and audio/video sources.
2. HOOKUP The P ositive (+) lead from your amplifier or receiv er should be connected to the RED (+) INPUT ter minal, and the Negative (-) lead from y our amplifier or receiver should be connected to the BLA CK (-) INPUT ter minal. 3. APPLICA TIONS Left, Center , and Right Channel Speaker f or high performance multichannel speak er systems.
1. Mark wall with the template, using a stud finder to maintain a 2” distance from any stud. Mak e sure that you are clear of any crossbraces in the w all structure. FOR ST AND ARD INST ALLA TION DR YWALL THICKNESS CANNO T EXCEED 1.25 INCHES. FOR THICKER W ALLS CALL M&K SOUND .
In-wall Operation Man ual 9. Remov e packing material and grille from speaker . Do Not Remove the Elastic Cor d! Make sure that the mounting screws are flush with the front baffle as sho wn. 10 . Angle the speaker to ward the w all and slip the bottom por tion of the mounting ar ms into the wall opening.
In-wall Operation Man ual 13. Make sure that the baffle is le vel by chec king with a le veling de vice. 14. Tighten all mounting screws sequentially to light resistance. Continue to tighten scre ws to an e ven torque that will secure the baffle to the wall.
7. SA TELLITE/SUBW OOFER PHASING TEST When using a subwoof er with your SW -150, a phasing test must be perf or med to insure good bass blending. This test insures optimum sound in the critical bass frequencies where your Subwoof er and Main speakers ov erlap.
In-wall Operation Man ual 9 8. SPEAKER D AMA GE & HO W T O A V OID IT An impor tant factor to consider with an y loudspeaker system is the potential f or speak er damage .
11 SPECIFICA TIONS IMPED ANCE: 4 ohms MINIMUM PO WER: 25 watts RMS RECOMMENDED PO WER: amplifiers with between 25 and 400 watts RMS MAXIMUM PO WER: 400 watts RMS unclipped peaks FREQUENCY RESPONSE: 77 Hz - 20 KHz ± 2 dB SENSITIVITY (2.83 V @ 1m): 92dB FRONT BAFFLE: 11 gauge steel GRILLE DIMENSION (H x W x D): 12.
In-wall Operation Man ual 11.
SW150 MANU AL PN # 70076 07/26/01 pt qrk4.11.
An important point after buying a device MK Sound SW-150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MK Sound SW-150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MK Sound SW-150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MK Sound SW-150 you will learn all the available features of the product, as well as information on its operation. The information that you get MK Sound SW-150 will certainly help you make a decision on the purchase.
If you already are a holder of MK Sound SW-150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MK Sound SW-150.
However, one of the most important roles played by the user manual is to help in solving problems with MK Sound SW-150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MK Sound SW-150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
