Instruction/ maintenance manual of the product MP-150 MK Sound
Go to page of 8
operation manual MP-150 Miller & Kreisel Sound, Inc. 9351 Deering A venue Chatsworth, CA 91311-5858 USA (818) 701-7010 fax (818) 701-0369 www .mk sound.
T ABLE OF CONTENTS 1. INTRODUCTION......................................................................................................3 2. PLACEMENT OF YOUR M&K SPEAKERS.....................................................................3 3. SPEAKER HOOK-UP .
1. INTRODUCTION Congratulations! Y our new M&K speaker system will give you years of unmatched enjoyment and excitement while listening to your favorite musical and audio/video sources. We encourage you to read this owner’s manual, as there is a great deal of information provided here to help you get the best possible performance.
D. VERTICAL ORIENT A TION The performance of your speakers is dependent on their orientation. By controlling the vertical dispersion, we limit the amount of sound that would otherwise be reflected with a time delay from the floor and ceiling (for the reasons discussed in section B above).
6. SA TELLITE/SUBWOOFER PHASING TEST In any system using a subwoofer separate from satellite speakers, a phasing test must be performed to insure good bass blending. This test insures optimum sound in the critical bass frequencies where your subwoofer and satellite speakers overlap.
The best way to avoid speaker damage is to use common sense. Use moderate boosts of tone controls or equalizers, at the very most. Listen carefully for any harshness and break-up, especially at high volume levels, and turn down the volume when needed.
1 1. SPECIFICA TIONS MP-150 IMPEDANCE: 4 ohms MINIMUM POWER: 25 watts RMS RECOMMENDED POWER: amplifiers with between 50 and 400 watts RMS or more (see below) MAXIMUM POWER: 400 watts RMS unclipped pea.
MAIN SA TELLITE SPEAKER 8 MP150 manual 09/09/2003 pt/qrk PN # 70082.
An important point after buying a device MK Sound MP-150 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MK Sound MP-150 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MK Sound MP-150 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MK Sound MP-150 you will learn all the available features of the product, as well as information on its operation. The information that you get MK Sound MP-150 will certainly help you make a decision on the purchase.
If you already are a holder of MK Sound MP-150, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MK Sound MP-150.
However, one of the most important roles played by the user manual is to help in solving problems with MK Sound MP-150. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MK Sound MP-150 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
