Instruction/ maintenance manual of the product MC 200 Mitsubishi
Go to page of 30
P ANEL COMPUTERS (Manual Part Number MAN-PNLPC-001).
W ARNING! Programmable control devices such as Panel Computers must not be used as st and-alone protection in any application. Unless proper safeguards are used, unwanted start-up s could result in equipment damage or personal injury . The operator must be made aware of this hazard and appropriate precautions must be t aken.
i MAN-PNLPC-001 MC200 Series Industrial Panel Computers CONTENTS W arning/Caution/Copyright ......................................................... inside cover Contents ...............................................................................
ii MC200 Series Industrial Panel Computers MAN-PNLPC-001 CONTENTS This p age intentionally left blank..
1 MAN-PNLPC-001 MC200 Series Industrial Panel Computers 1 INTRODUCTION The table, below provides an overall description of the topics covered within this manual. Introduction Provides Manual Organization, and lists what you need to get started. Discusses how to get help with questions or problems you might encounter through T echnical Support.
2 MC200 Series Industrial Panel Computers MAN-PNLPC-001 1 INTRODUCTION The Mitsubishi Electric Automation MC200 Series Panel Computer features a 700 Mhz Intel Pentium/Celeron processor single board computer , in various sizes to fit your application needs.
3 MAN-PNLPC-001 MC200 Series Industrial Panel Computers 1 INTRODUCTION Hardware • MC200 Industrial Panel Computer Series: MC220 — 10.4-inch XP/e (embedded) MC240 — 12.
4 MC200 Series Industrial Panel Computers MAN-PNLPC-001 1 INTRODUCTION This page intentionally left blank..
5 MAN-PNLPC-001 MC200 Series Industrial Panel Computers Models MC220 10.4” Windows XP/e Industrial Panel Computer MC240 12.1” Windows XP/e Industrial Panel Computer MC250 15.
6 MC200 Series Industrial Panel Computers MAN-PNLPC-001 There are replacement p arts and optional equipment available to customize or upgrade the Industrial Panel Computer to fit your application. The following tables provide you with a list of this equipment.
7 MAN-PNLPC-001 MC200 Series Industrial Panel Computers O p tio n a l S o ftw a re Pr oduc t Pa r t Num b er Win do w s N T 4.0 W o r kst ation M C 701 Win do w s 2 000 S erv er M C 7 02 Win do w s 2 .
8 MC200 Series Industrial Panel Computers MAN-PNLPC-001 COMPUTER SPECIFICA TIONS CPU T ype: 700 Mhz Intel Celeron Processor Memory: 128 MB minimum (expandable up to 512 MB) BIOS: Flash ROM SSD: Option.
9 MAN-PNLPC-001 MC200 Series Industrial Panel Computers Inst alling the P ANEL COMPUTER requires the following three major steps : The Panel Computer is a front-panel stud mount unit. Mounting of the unit requires a p anel cutout, and drilling fourteen (14) holes in the mounting sur- face for the mounting studs.
10 MC200 Series Industrial Panel Computers MAN-PNLPC-001 Mounting The Panel Computer is a p anel-mount unit. The following diagrams show the outline and cutout dimensions necessary to mount the panel using the studs.
11 MAN-PNLPC-001 MC200 Series Industrial Panel Computers 10.4" and 12.1" Industrial Panel Computers Models MC220 and MC240 Cutout Dimensions 4 INST ALLA TION.
12 MC200 Series Industrial Panel Computers MAN-PNLPC-001 15" Industrial Panel Computer — Model MC250 Outline Dimensions 4 INST ALLA TION.
13 MAN-PNLPC-001 MC200 Series Industrial Panel Computers 15" Industrial Panel Computer — Model MC250 Cutout Dimensions 4 INST ALLA TION.
14 MC200 Series Industrial Panel Computers MAN-PNLPC-001 CONNECTORS 5 EXTERNAL COMPONENTS Located on one side of the Industrial Panel Computers are the following con- nectors: T wo USB (Universal Serial Bus) Connectors There are two USB connectors located on the side of the unit.
15 MAN-PNLPC-001 MC200 Series Industrial Panel Computers One KEYBOARD Connector A personal system/2 (PS/2)–style keyboard port. One MOUSE Connector A personal system/2 (PS/2)–compatible mouse port.
16 MC200 Series Industrial Panel Computers MAN-PNLPC-001 PCMCIA Slot (optional) PCMCIA (Personal Computer Memory Card International Association) are small form factor devices that are used in a variety of applications and devices, par- ticularly in digital cameras, lap top computers, PDAs, and many other mobile devices.
17 MAN-PNLPC-001 MC200 Series Industrial Panel Computers 5 EXTERNAL COMPONENTS On the other side of the Panel Computer you will find the Power Connector and a Power V oltage Switch . Use the power voltage switch to select 1 15 or 230 V AC. Also shown is the location of the optional fan.
18 MC200 Series Industrial Panel Computers MAN-PNLPC-001 Push Buttons Located on the bottom rear p anel, you will find a recessed POWER ON push button and a recessed RESET push button. There is also a recessed DIM- MER potentiometer to adjust the display brightness on the 10.
19 MAN-PNLPC-001 MC200 Series Industrial Panel Computers Once you have the Panel Computer inst alled and the peripheral devices con- nected, you are ready to power up the computer . Press the POWER ON push button located on the rear p anel of the computer (as described on page 18).
20 MC200 Series Industrial Panel Computers MAN-PNLPC-001 Expansion Card Inst allation The Panel Computers can accommodate up to 2 PCI exp ansion cards. T o install an expansion card: 1. Disconnect the power source from the Panel Computer . 2. T o open the rear of the enclosure, remove 9 screws from back captive p anel.
21 MAN-PNLPC-001 MC200 Series Industrial Panel Computers 7 MAINTENANCE AND UPGRADES 4. Remove the “card ret aining bracket” from center posts by removing screw from back post holding card retainer . Lift up retainer and slide out of the slot in the front post.
22 MC200 Series Industrial Panel Computers MAN-PNLPC-001 7 MAINTENANCE AND UPGRADES 6. Reinst all card retainer bracket. Slide bracket into the slot in the front post and secure with a screw in the back post. 7. Adjust card retainer foot until it is securely against the top of the card that you have just inst alled.
23 MAN-PNLPC-001 MC200 Series Industrial Panel Computers 7 MAINTENANCE AND UPGRADES Maintenance Preserving Dat a Viruses can corrupt files; files can be inadvertently deleted; and hard-disk drives can fail after extended used. T o avoid data loss, regularly back up the dat a files on the hard-disk drive.
24 MC200 Series Industrial Panel Computers MAN-PNLPC-001 7 MAINTENANCE AND UPGRADES T ouchscreen/Chemical Compatibility The touchscreen has a polyester surface. The following list is provided to make you aware of the general compatibility between chemicals that may be present in your work environment and the polyester surface of the touchscreen.
25 MAN-PNLPC-001 MC200 Series Industrial Panel Computers Err or / Impr ovement Repor t Fill in this form and fax or mail to: For Mitsubishi use only: Name Company Phone Number ________________________.
26 MC200 Series Industrial Panel Computers MAN-PNLPC-001 _____________________________________________________________________________________________________________ _________________________________.
An important point after buying a device Mitsubishi MC 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi MC 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi MC 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi MC 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi MC 200 will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi MC 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi MC 200.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi MC 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi MC 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
