Instruction/ maintenance manual of the product FD730U Mitsubishi
Go to page of 48
DLP™ PROJECTOR MODEL FD730U FD730U-G User Manual This User Manual is important to you. Please r ead it befor e using your pr ojector . FD730U FD730U-G.
EN-2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE P ARTS INSIDE REFER SERVICING TO QUALIFIED SER VICE PERSONNEL.
EN-3 Contents Important safeguards ........................................................................................................................ 4 Overview ....................................................................................
EN-4 Important safeguar ds Please read all these instructions r egar ding your projector and r etain them for futur e refer ence. Follow all warnings and instructions marked on the projector . 1. Read instructions All the safety and operating instructions should be read befor e the appliance is operated.
EN-5 Important safeguards (continued) WARNING: Unplug immediately if there is something wr ong with your projector . Do not operate if smoke, strange noise or odor comes out of your projector . It may cause fire or electric shock. In this case, unplug immediately and contact your dealer .
EN-6 1 67 8 9 23 4 10 11 13 14 12 5 1 Lamp cover 2 Lens 3 FOCUS ring 4 ZOOM ring 5 LENS SHIFT dial 6 Remote control sensor (fr ont) 7 Speaker 8 Lock bar 9 Intake vent 10 Control panel 11 Exhaust vent .
EN-7 1 Overview (continued) Bottom side 1 Adjustment feet Remote control 1 ON button 2 MAGNIFY button 3 VOLUME UP , DOWN buttons 4 KEYSTONE button 5 MENU button 6 ENTER button 7 A V (Audio/Video) MUTE.
EN-8 Remote contr ol Battery installation Use two (AA, R6) size batteries. Inserting the batteries into the remote contr ol 1. Remove the back cover of the remote contr ol by pushing the battery compartment door in the direction of the arrow .
EN-9 Scr een size and pr ojection distance Refer to the following tables to determine the screen size and pr ojection distance. t 5IFmHVSFTJOUIFUBCMFTBS FBQQSPYJNBUFBOENBZ.
EN-10 Installation (continued) Fr ont pr ojection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector . Ask a specialist for installation.
EN-11 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player , and personal computer that have analog RGB output connectors.
EN-12 Basic connections (continued) Connection (for video equipment having an HDMI terminal) Equipment having an HDMI terminal T o HDMI terminal HDMI HDMI (with HDMI logo) cable (option) Important: t 6TFBDPNNFSDJBMMZBWBJMBCMF)%.*XJUI)%.
EN-13 Pr ojector + Computer For computer with mini D-SUB COMPUTER/ COMPONENT VIDEO IN MONITOR OUT Audio cable (option) PC audio cable (option) T o monitor port T o PC audio output AUDIO IN-1 or IN-2 AUDIO OUT Necessary when outputting to both a PC monitor and the projector .
EN-14 Pr eparation Pr eparation for pr ojection 1. Attach the pr ovided power cord to the pr ojector . 2. Plug the power cor d in the wall outlet. 3. Remove the lens cap. W ar ning: t %POPUMPPLJOUPUIFMFOTEJSFDUMZXIFOUIFQS PKFDUPS is on.
EN-15 When pr ojected images ar e distorted to a trapezoid T o correct vertical keystone distortion, press the KEYSTONE button on the projector or the r emote control to display KEYSTONE, and adjust the image by pressing the , button (or VOLUME , button on the remote contr ol).
EN-16 Basic operation Power -on 1. T urn on the device connected to the projector first. 2. Plug the power cor d in the wall outlet. t 5IF108&3JOEJDBUPSMJHIUTVQ t *GUIF.
EN-17 Basic operation (continued) t 5 PBWPJEQFSNBOFOUMZJNQSJOUJOHBmYFEJNBHF onto your projector , please do not display the same stationary images for long period. 6. Adjust the image size by turning the zoom ring. 7. Adjust the vertical position of the displayed image by turning the LENS SHIFT dial.
EN-18 Basic operation (continued) A V mute The video and audio signals are temporarily muted when the A V MUTE button is pressed. T o cancel muting, press the A V MUTE button again. Setting the aspect ratio Y ou can change the aspect ratio of the input video signal (or the ratio of width to height of the image).
EN-19 Menu operation As one of the two types of MENU displa y , following QUICK MENU a ppears on the screen when pr essing MENU button on the r emote con trol. In addition, DET AIL MENU (See page 21) appears when selecting DET AIL MENU in this MENU and pr essing ENTER button.
EN-20 Menu operation (continued) Menu Options Set the f ollowing options provided in the respective menus . 1. QUICK MENU E( ou cannot adjust COLOR TEMP . when WALL SCREEN in the INST ALLA TION menu is set to other than OFF . E When COLOR ENHANCER is s witched, projected images may be distorted.
EN-21 Menu operation (continued) DET AIL MENU * Menus are not displayed when no signal is supplied to the pr ojector . IMAGE INST ALLA TION FEA TURE SIGNAL INFORMA TION COLOR ENHANCER CONTRAST BRIGHTNESS COLOR TEMP .
EN-22 Menu operation (continued) Basic operatio n Se veral settings can be adjusted using the menu. Example : A uto power of f time setting 1. Press the MENU button. 2. Select the DET AIL MENU and pr ess the ENTER button (or button). 3. Press the or button to select INS T ALLA TION.
EN-23 Menu operation (continued) 2. INST ALLA TION menu @ -* AND ARD lamp mode is activ ated by def ault whene ver the projector is turned on. When the LOW LAMP MODE has been chosen, th e def a :19 ANDARD lamp mode is s witched to the LOW lamp mode in 1 minute.
EN-24 Menu operation (continued) 3. FEA TURE menu E( ou can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, 576i or 1080p video signal. e F g n i t t e S n o i t p o u n e M ature description ASPECT AU TO Select to change the aspect ratio automatically depending on the input signal.
EN-25 Menu operation (continued) 4. SIGNAL menu H% hough horizontal st r ips ma y appear on the enlar ged projected image , such symptom is not a malfunction. H( hen y ou change the horizontal or v er tical position to a lar ge extent, noise may appear .
EN-26 Menu operation (continued) 5. NETWORK menu 6. INFORMA TION menu e F g n i t t e S n o i t p o u n e M ature description NETWORK IP CONFIG menu PROJECT OR NAME ***** ... Displays PR OJECTOR NAME. Displays PR OJECTOR NAME in blank when PROJECT OR NAME is not set.
EN-27 Image adjustment Adjusting pr ojected imag es T o adjust the brightness (CONTRAST and BRIGHT - NESS): Y ou can mak e adjustments of the br ightness of the pr ojected image using the menu. (See page 20 or 22 f or the menu options.) 1. Display the QUICK MENU or the IM AGE menu.
EN-28 BrilliantColor™ Use this setting to make colors with medium brightness, such as y ellow and the skin tone appear natural. Pr ess the button to decr ease the v alue to lessen the ef fect. Pr ess the button to increase the v alue to heighten the effect.
EN-29 Image adjustment (continued) How to adjust the image supplied fr om the computer using the menu: Carry out the following procedures according to the symptoms. Wide strips appear . ....................................................... Adjust TRACKING in the SIGNAL menu .
EN-30 Y ou can set the netwo r k of the pr ojector using the menu. Setting Pr ojector Name 1. Display the NETW ORK menu. (See page 22 f or menu setting.) 2. Press the or button to select PROJECT OR NAME. 3. Press the or button to select SET . 4. Press the ENTER b utton.
EN-31 Network settings (continued) Setting or Clearing DHCP 1. Display the IP CONFIG menu. 2. Press the or button to select DHCP . 3. Press the ENTER b utton. > onfir mation dialog appears . 4. Press the or button to select ON or OFF . 5. Select the item to set, and press the ENTER button.
EN-32 Network settings (continued) How to Use Network Function 1 When connecting a computer and projector with LAN, config- ure the both IP Addr esses in the same network group . If connecting in dif fer ent network group , be sure to use a router . As for the settings of a r outer , ask the network adminis- trator .
EN-33 Setting of the image displayed during startup or muting Y ou can display your desired image as the startup screen (or splash screen). Using the menu, y ou can also use such image as a ba ck- gr ound that is displ ay ed while the video is muted or no signal is sup- plied.
EN-34 Advanced featur es (continued) D When you display 60-Hz and 50-Hz video signals at the same time, motion images ma y not be display ed properly . In this case, set VER T . SYNC of USER in the SIGNAL men u to OFF fo r the left screen. (See page 25.
EN-35 Setting the ef ficient mode By pressing the EFFICIENT MODE button, you can display the EFFICIENT MODE menu to set the following menu items: LAMP MODE, ST ANDBY MODE, and AUTO POWER OFF . (For details of each item, see page 23.) 1. Press the EFFICIENT MODE button.
EN-36 Connection For details of the connection, see “LAN control UTILITY operation manual” in the CD-ROM. When ST ANDBY MODE in the INST ALLA TION menu or the EFFICIENT MODE menu of the projector is set to LOW , the LAN network is disabled. T o enable the LAN network, set ST ANDBY MODE to ST ANDARD.
EN-37 This projector is equipped with a lamp to pr oject images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to r eplace the lamp with a new lamp separately sold that is exclusive to this projector .
EN-38 Lamp r eplacement (continued) 3. Assemble the lamp replacement attachment by folding two taping portions (g) and two cutout portions (h) along the folding line as the figure.
EN-39 T roubleshooting Before asking for r epair of the projector , check the following. If the symptom persists, stop using the projector , be sure to unplug the power plug, and then contact your dealer . No image appears on the screen. Problem Solution Power can not be turned on.
EN-40 T roubleshooting (continued) No image appears on the screen. (continued) Problem Solution The screen for entering the password appears. t 1 "44803%'6/$5*0/JOUIF'&" 563&NFOVIBTCFFOTFUUP%*41-" :*/165UP enable the password lock.
EN-41 T roubleshooting (continued) Images are not displayed corr ectly . (continued) Problem Solution Hue is not appropriate. t $IFDLUIBUUIFDBCMFTDPOOFDUFEUPUIFFYUFS OBMEFWJDFTBS FOPUCSPLFO Tint in projected images is incorrect.
EN-42 Others (continued) Problem Solution The buttons on the control panel (except for the POWER button) don’t function. t 1 "44803%'6/$5*0/JOUIF'&" 563&NFOVIBTCFFOTFUUP.&/6"$$&44UP enable the password lock.
EN-43 Indicators This projector has two indicators, each of which shows the operation condition of the pr ojector . The following offer solutions to possible pr oblems.
EN-44 Specifications T ype DLP™ projector Model FD730U/FD730U-G Rated power supply 100 - 240 V AC, 50/60 Hz Power consumption 4.2 A During standby: 0.5W (when ST ANDBY MODE is LOW) Display T echnology 0.65-inch single chip Digital Micromirr or Device (DMD) Pixels: 1920 x 1080 = 2073600 pixels Colors 16770000 colors Projection lens F 2.
EN-45 Connectors COMPUTER/COMPONENT VIDEO IN, MONITOR OUT (mini D-SUB 15-pin) 15 11 6 10 15 HDMI (HDMI 19-pin) 19 1 2 18 COMPUTER/COMPONENT VIDEO IN Pin No. Spec. 1 R (RED)/C R 2 G (GREEN)/Y 3 B (BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock MONITOR OUT Pin No.
EN-46 Specifications (continued) Specification of RGB signals in each computer mode of the projector *1 A vailab le with the signal for the HDMI terminal. *2 Y ou can select from two adjustment modes by pressing the A UTO POSITION b utton. For details, see page 17 .
EN-47 Specification of RGB signals in each computer mode of the pr ojector (continued) Impor tant: D" ome computers aren’ t compatible with the projecto r . D# he projector’ s maximum resolution is 1920 x 1080 pix els. It ma y not displa y images of higher resolutions than 1920 x 1080 cor - rectly .
1 Zusho Baba, Nagaokakyo-City , Kyoto Japan V er . 1.0.
An important point after buying a device Mitsubishi FD730U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi FD730U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi FD730U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi FD730U you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi FD730U will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi FD730U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi FD730U.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi FD730U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi FD730U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
