Instruction/ maintenance manual of the product WD-73C9 Mitsubishi Electronics
Go to page of 69
• Design specifications are subject to change without notice. MITSUBISHI DIGIT AL ELECTRONICS AMERICA, INC. 9351 Jeronimo Road, Irvine, CA 92618-1904 Copyright © 2009 Mitsubishi Digital Electronics America, Inc.
.
Page 3 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 INTRODUCTION ........................................................................................................................
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 4 CHIP P ARTS REPLACEMENT ......................................................................................................... 3 8 REPLACEMENT P ARTS .
Page 5 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 INTRODUCTION This service manual provides service instructions for the V41C, V41 and V41+ chassis types. The specific models for each chassis type, dimensions and weight are listed below .
Page 6 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 SAFETY PRECAUTIONS NOTICE: Observe all cautions and safety related notes located inside the receiver cabinet and on the receiver chassis.
Page 7 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 BACK COVER REMOV AL Back Cover Removal 1 ) Remove screws (A) from the back cover . 2 ) Remove the back cover from the TV . CHASSIS REMOV AL & DISASSEMBL Y Chassis Removal 1 ) Remove five screws (A), one side, four rear .
Page 8 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Rear T erminal Cover Removal 1 ) Remove nut (A) from the ANT input. 2 ) Disconnect connector PG2 from the rear of the RS232C assembly (V41+ only).
Page 9 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 T op Chassis Brackets Removal NOTE: Removal of the Power Supply Shield and PWB-POWER is not required to remove the T op Chassis Brackets.
Page 10 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 OPTICAL ENGINE ASSEMBL Y - COMPONENT AND CONNECT OR LOCA TIONS (Rear View) OPTICAL ENGINE ASSEMBL Y PWB-BALLAST REPLACEMENT Note: T o remove the PWB-Ballast, it is not necessary to remove the Engine or Lamp Cartridge.
Page 11 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 OPTICAL ENGINE REPLACEMENT OPTICAL ENGINE ASSEMBL Y REMOV A L 1 ) Remove 3 screws (A) from the Optical Engine. 2 ) Disconnect all cables to the Optical Engine Assembly .
Page 12 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Figur e 2: Duct Assembly (T op V iew) DUCT INTERIOR COMPONENTS 1) Figure 3 shows the Duct Interior Components.
Page 13 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Figur e 4: Lower Duct Rear Mounting Scr e w Figur e 5: Lower Duct Front Mounting Scr ew LOWER DUCT REMOV AL 1 ) Remove Upper Duct, Fans, Fan Holders, Thermal Sensor and Lamp Cartridge.
Page 14 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 COLOR WHEEL REPLACEMENT SYMPTOMS • Noise (Bad Motor Bearing ) • Solarized Picture NOTE: Before replacing the Color Wheel, check the Index Delay Adjustment.
Page 15 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 PROJECTION LENS REPLACEMENT PROCEDURE CAUTION: Any dust or fingerprints in the optics can cause abnormalities in the picture. This procedure should be performed in a dust free environment.
Page 16 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 SCREEN REPLACEMENT 60”, 65” & 73” Models Screen Assembly Removal and Replacement 1 ) Open the front control panel door . (V41+ Only) Pull away S peaker Covers followed by Center Escutcheon.
Page 17 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Screen Removal From the Bezel-Front 1 ) Remove screws (A) and remove the top, bottom and side rails. 2 ) Lift the Fresnel Lens and Lenticular screen from the Bezel-Front.
Page 18 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 CAUTION: Wear gloves when handling the Lenticular Screen and Fresnel Lens. This prevents cuts and finger prints. Do not place Fresnel Lens in the sun .
Page 19 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 A A SCREEN REPLACEMENT 82” Models Front Cover and Pedestal Removal 1 ) Remove screws (A) around the bottom rear edge. 2 ) Open the front control panel door and remove screws (B).
Page 20 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 CAUTION: Wear gloves when handling the Lenticular Screen and Fresnel Lens. This prevents cuts and finger prints. Do not place Fresnel Lens in the sun .
Page 21 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Lenticular Screen and Fresnel Lens Replacement 1 ) Place the Fresnel Lens on top of the Lenticular Screen with the labels facing outside as shown.
Page 22 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 MIRROR REPLACEMENT MIRROR REPLACEMENT - 60”, 65” & 73” Models 1 ) T o access the Mirror for replacement, remove the Screen Assembly (See Screen Assembly Removal).
Page 23 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 SPEAKER REPLACEMENT 1 ) Remove the Screen Assembly to access the speakers. 2 ) Remove screws (A) and remove the S peaker Assembly from the cabinet.
Page 24 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 REMOTE CONTROL USE FOR SERVICE Many service functions and adjustments are accessed using the Remote Control. The V41 uses a new version remote.
Page 25 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 OPTION MENU 1. Press the <MENU> button on the remote control. 2. Press the buttons <2-4-7-0>. The screen will display the Option Menu.
Page 26 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Reset / Initialization Guide RESET / INITIALIZA TION SERVICE TIP: Many customer generated symptoms, intermittent symptoms or no symptom found can be resolved by using the various Reset and Initialization options.
Page 27 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 RESET / INITIALIZA TION (Continued) INITIAL SE T TIN GS A ud io/ Video Se t up Me.
Page 28 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 A . A/V Memory Each of the external inputs has it’s own Audio/V ideo Memory . A change in an A/V setting at a specific input is stored in memory for that specific input.
Page 29 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 SELF DIAGNOSTICS T o activate, press the front p anel < ACTIVITY> + <CH T > buttons at the same time and hold for 5 seconds.
Page 30 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 ERROR CODES Error Codes, descriiptions and the most likely cause of the error are.
Page 31 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82827 WD-65837 / WD-73837 / WD-82837 SER VICE ADJUSTMENTS There are 4 Service Adjustments: Electrical Adjustments ( th.
Page 32 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82827 WD-65837 / WD-73837 / WD-82837 Horizont al and V ertical Position Adjustment 1. Enter the Service Mode <MENU><2-4-5-7> . 2. Select the Geometry T est Pattern shown below < Z > < WW > x2 .
Page 33 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82827 WD-65837 / WD-73837 / WD-82837 Manual Geometry Alignment 1. Activate the Service Mode <MENU><2-4-5-7>. From the Service Menu, press the <0> button.
Page 34 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82827 WD-65837 / WD-73837 / WD-82837 Phase 2 - 4:3 and 16:9 Alignment 1. With the Manual Geometry Alignment activated, press < > to enter the 4:3 Alignment Mode. The p attern below will be displayed.
Page 35 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82827 WD-65837 / WD-73837 / WD-82837 4:3 M O D E Se lect S t r a i gh t es t R e d L ine ( Bo t t o m ) 4.
Page 36 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82827 WD-65837 / WD-73837 / WD-82837 Dat a T ransfer Service Data is duplicated and stored in separate EEPROMs in two locations.
Page 37 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Using Lead Free Solder Pb S old e r The symbol shown below indicates Lead (Pb) Free solder was used during the construction of PWBs.
Page 38 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 CHIP P ARTS REPLACEMENT Some resistors, shorting jumpers (0 Ohm resistors), ceramic capacitors, transistors and diodes are chip parts.
Page 39 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Parts Ordering T o expedite delivery of replacement parts orders, specify the following: 1. Model Number/Serial Number 2. Part Number and description 3.
Page 40 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 QUICK REFERENCE P ART P ART NUM B ER La m.
PAGE 41 [#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-65C9, (f) WD-73737, (g) WD-73837, (h) WD-73C9, (i) WD-82737, (j) WD-82837 Ref # Part # Part Name & Descripti.
PAGE 42 [#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-65C9, (f) WD-73737, (g) WD-73837, (h) WD-73C9, (i) WD-82737, (j) WD-82837 Ref # Part # Part Name & Descripti.
PAGE 43 [#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-65C9, (f) WD-73737, (g) WD-73837, (h) WD-73C9, (i) WD-82737, (j) WD-82837 Ref # Part # Part Name & Descripti.
PAGE 44 [#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-65C9, (f) WD-73737, (g) WD-73837, (h) WD-73C9, (i) WD-82737, (j) WD-82837 Ref # Part # Part Name & Descripti.
PAGE 45 [#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-65C9, (f) WD-73737, (g) WD-73837, (h) WD-73C9, (i) WD-82737, (j) WD-82837 Ref # Part # Part Name & Descripti.
PAGE 46 [#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-65C9, (f) WD-73737, (g) WD-73837, (h) WD-73C9, (i) WD-82737, (j) WD-82837 Ref # Part # Part Name & Descripti.
PAGE 47 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 [#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-6.
PAGE 48 MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 [#] Model Legend: (a) WD-60737, (b) WD-60C9, (c) WD-65737, (d) WD-65837, (e) WD-6.
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 49 MIRROR KIT P ARTS LIST MIRROR PREP ARA TION Prepare the mirror for inst allation by adding HOLDER-MIRROR-EDGE and STIFFENERs to the back of the mirror .
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60737 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 50 A F B B 20mm 28mm D FRON T FRON T FRONT 25m m 60 Inch Mirror Assembly A) Backside.
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60 73 7 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 51 PC9020 T9030 PS 1 3 D9010 D9008 D9011 D9009 D9012 R9030 D9013 PWB POWER 18VS 12.
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60 73 7 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 5 2 F9A01 PWB POWER PWB MAIN 18VS 12VS Voltage Doubler D9A01, D9A02, Q9A 1 1 30VSL 12VS 1.8VS 3.3VS 5VSL 5VSL 18VS PD 6 7 10 11 2 PD 6 7 10 11 2 30VSL 1.
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60 73 7 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 5 3 5VSL 3.3VSL BU3.3V ABU3.3V DBU3.3V TV PC IR SENSOR REMOTE STANDBY ON 5VS RELAY AC (LINE) STANDBY SMPS MAIN SMPS 18VS 12VS 340V AC AC (NEUTRAL) LAMP BALLAST 1.
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60 73 7 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 5 4 HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI Processor IC2A01 CSCL CSDA CEC-D INT CEC-A DS.
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60 73 7 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 5 5 FB 1 3 2 4 5 7 6 5VS Q7A03 Q7A05 Microprocessor IC7A01 J6C00 PWB PREAMP PWB CONTROL LE 1 3 2 4 5 7 6 8 10 9 3.
MODELS: WD-60C9 / WD-65C9 / WD-73C9 / WD-60 73 7 / WD-65737 / WD-73737 / WD-82737 WD-65837 / WD-73837 / WD-82837 Page 5 6 Optical Engine Input 1 Input 2 Input 3 USB 2.
BOSS BOSS BOSS BOSS BOSS BOSS BOSS BOSS BOSS BOSS 4 123 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 123 1 2 3 4 5 6 7 8 9 1 01 11 21 31 41 51 61 71 81 92 02 12 2 123 1234 45 123 10 4 5 6 .
18VS 5VSL 12VS PL PS PE PD IC9030 *IC9010 V VH BOSS 470 *C9046 500V MTZJ6.2C@LF D9022 *F9002 125V 5A 1 3 F9000 S10A 125V 1K 1/16W R9031 2SC3052-T112-1E,F Q9008 PC9010 FOD617C 1 2 3 4 16V *C9035 2200U 4.7K 1/16W R9035 390 1/16W R9033 1S2076A/1S2471OM D9020 ET9001 123 18K 1/16W R9034 1K 1/16W R9029 3.
Q1 Q2 Q1 Q2 BOSS BOSS BOSS Q1 Q2 BOSS LAMPLITZ_ LAMPEN-BALLAST_ DIM_ COVER-DET_ 5VS_ TXD RXD 5VS 3.3VSL 3.3VS 30VSL STBY-ON 1.8VS ISL6545ACBZ-TS2698 10uF C9A25 6.3V FDS8984 1/16W R9A13 22 2.2 1/10W R9A51 2SC3052-T112-1E,F Q9A05 10uF C9A27 6.3V 10uF C9A59 6.
G G UB AVF VARISTOR USB-DM1 L1B01 N-220 ohm 0.1 C1B05 25V/16V USB-DP1 3.3VS 5VS 0.1 C1B02 25V/16V L1B02 N-220 ohm 100K 1/16W R1B02 USB-PWRFLT1 1/16W R1B01 3.3K USB-PWRON1 5VS L1A04 10MH C1A07 10 50V C1A04 100 16V 1/16W R1A10 100 TUNER-SDA-M0 TUNER-IF-P 1/16W R1A09 100 0.
AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF VARISTOR AVF V.
5 6 CLK54_XTAL_P CLK54_XTAL_N 3.3VS BSC-M1-SDA BSC-M1-SCL DDR_VREF D1.2V_BCM3549 A2.5V_BCM3549 AUDMX_LDO_CAP A2.5V_BCM3549 A2.5V_BCM3549 A2.5V_BCM3549 A1.2V_BCM3549 A1.2V_BCM3549 A2.5V_BCM3549 PLL_DS_AVDD1P2V A1.2V_BCM3549 A1.2V_BCM3549 A2.5V_BCM3549 HDMI_0_PLL_VDD1P2V A1.
IC4F01 LVDS_TX0_D0_N LVDS_TX0_D1_N LVDS_TX0_D2_P LVDS_TX0_D2_N LVDS_TX0_CLK_P LVDS_TX0_CLK_N LVDS_TX0_D3_P LVDS_TX0_D3_N LVDS_TX0_D4_N LVDS_TX0_D4_P LVDS_TX1_D0_P LVDS_TX1_D0_N LVDS_TX1_D1_P LVDS_TX1_.
NAND_DATA[0] NAND_DATA[1] NAND_DATA[2] NAND_DATA[4] NAND_DATA[5] NAND_DATA[6] NAND_DATA[7] NAND_WEN NAND_ALE NAND_CLE NAND_REN NAND_RBN NAND_CS0N NAND_DATA[0] NAND_DATA[1] NAND_DATA[2] NAND_DATA[3] NA.
LVDS_TX0_D0_P LVDS_TX0_D0_N LVDS_TX0_D1_P LVDS_TX0_D1_N LVDS_TX0_D2_P LVDS_TX0_D2_N LVDS_TX0_CLK_P LVDS_TX0_CLK_N LVDS_TX0_D3_P LVDS_TX0_D3_N LVDS_TX0_D4_P LVDS_TX0_D4_N LVDS_TX1_D0_P LVDS_TX1_D0_P LV.
J6C00 IC6C02 OUTRB[6] OUTBA[3] OUTBB[5] OUTBB[9] OUTRA[9] OUTRB[3] OUTRA[8] OUTRB[5] OUTGB[7] OUTRA[3] OUTGB[6] OUTRA[5] OUTBB[1] OUTBA[9] OUTRB[9] OUTRA[6] OUTRB[1] OUTBA[4] OUTBA[2] OUTRA[7] OUTRB[8.
BOSS MUTE-SPKR1 L3C12 MMZ1608S601A 0.1 C3C14 25V/16V DGND DGND DGND 0.1 C3C12 25V/16V 1/16W R3C06 100 DGND DGND DGND DGND AGND L3A33 22uH, 3A L3A36 22uH, 3A L3A25 22uH, 3A L3A28 22uH, 3A 4 51 2 3 1/16W R3A16 1M 470 1/16W R3A15 DGND DGND 0.
5 6 BUS-REQUEST TV-TXD 1/16W R7A68 330 0.1 C7B57 25V/16V 1/16W R7A67 330 1/16W R7A72 2.2K 1/16W R7A89 22K TV-RXD LAMPEN-BALLAST 1/16W R7AC6 10K 2.2K 1/16W R7A84 RT1N436C-T112-1 Q7A04 2.2K 1/16W R7A83 0 1/16W R7A27 1/16W R7A87 22K DMPWRGDN 3.3VSL 1/16W R7A46 100 1/16W R7A88 22K 1/16W R7AB3 22K 2SC3052-T112-1E,F Q7A03 LAMP-R 5.
REMOCON PRE-AMP S8002 KSHS611BT S8004 KSHS611BT S8000 KSHS611BT S8003 KSHS611BT S8006 KSHS611BT S8005 KSHS611BT PJ8232 LE5 BOSS BOSS BOSS BOSS 1/16W R8004 3.3K D8000 SML1216W-C,D 1 2 3 1/16W R8001 3.3K 1/16W R8002 3.3K 1/16W R8000 3.3K 1/16W R8003 3.3K 10K 1/16W R8303 MAX4489ASA+T 1 7 5 6 2 4 3 8 1U C8302 10V/6.
An important point after buying a device Mitsubishi Electronics WD-73C9 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics WD-73C9 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics WD-73C9 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics WD-73C9 you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics WD-73C9 will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics WD-73C9, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics WD-73C9.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics WD-73C9. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics WD-73C9 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center